The structural analysis of composite materials reinforced with SI-C particles

• Autorzy: Nedelcu D. , Chelariu R. , Ciofu C.
• Języki publikacji: EN

Abstrakty

EN

The composite materials with particles consisting of a basic material (matrix) embedded particles of one or more materials. The particles can be metallic or nonmetallic, as the matrix can be, metalic or non metalic. Like a first step the composite mixing involves the embedded process analysis of SiC particles in molten metal. The main issues considered relate to some aspects of embedding additional material in molten metal and methods of achieving the best possible including it. From this point of view was used the overheat of metalic matrix. The experimental plan was followed by Taguchi and structural analysis made was focus on four from 16 completed experimental researches. Six parameters were used each one has two levels. Also the micrographs corresponding experimental tests are presented.

Słowa kluczowe

EN

composite materials; SiC particles; composite mixing

PL

materiały kompozytowe; SI-C cząsteczki; kompozytowa mieszanina

• Wydawca: Instytut Automatyzacji Procesów Technologicznych i Zintegrowanych Systemów Wytwarzania Politechniki Śląskiej
• Czasopismo: Wybrane Problemy Inżynierskie
• Rocznik: 2011
• Tom: nr 2
• Strony: 273--280
• Opis fizyczny: Bibliogr. 7 poz.

Twórcy

autor

Nedelcu D.

autor

Chelariu R.

autor

Ciofu C.

• Department of Machine Manufacturing Technology, “Gheorghe Asachi” Technical University of Iasi-Romania, Iasi, Romania

Bibliografia

• 1. Carcea, I., (2008). Materiale compozite. Fenomene la interfata, Politehnium Publishing House, ISBN 978-973-621-207-9, pp. 64-67, Iasi
• 2. Kacar, A.S., Rana, F., Ştefănescu, D.M. (1991). Kinetics of gas-to-liquid transfer of particles in metal matrix composites. Materials Science and Engineering, Al 35, pp. 95-100
• 3. Mourao, A., Slatineanu, L., Coelho, A., (2010). The effect of wiper edge inserts on the specific cutting energy in face milling of aluminium alloys, International Journal of Modern Manufacturing Technologies, Vol. II, No. 2 / 2010, pp. 71-77, ISSN 2067-3604
• 4. Nedelcu, D., Pruteanu, O., (2000). Aspecte ale formarii canelurilor exterioare prin deformare plastica la rece utilizand metoda Taguchi, Tehnica-Info Publishing House, ISBN 9975-910-96-3, pp. 132-140, Chisinau
• 5. Shangguan, D., Ahuja, S., Ştefănescu, D. M. (1992). An Analitical Model for the interaction between an Insoluble Particle and an Advancing Solid/Liquid Interface. Metallurgical Transactions A., Vol. 23 A, pp. 669-680
• 6. Susac, F., Banu, M., Epureanu, A. (2009). Cooling rate dependance on mould thickness for aluminum alloy casting, Proceedings of ModTech2009 Internatioanal Conference, ISSN 2066-3919, pp. 623-627, Iasi, Romania
• 7. Vizureanu, P et al (2010). Interdisciplinary researches of the potential limits for the solar energy in solids on heating-melting range, Proceedings of ModTech2010 International Conference, ISSN 2066-3919, pp. 671-674, Slanic-Moldova, Romania