The new devices of gas-turbine engines of ground transport on the basis cascade pressure exchanger of krajniuk

• Autorzy: Krajniuk A.
• Języki publikacji: PL

Abstrakty

EN

Main trends of perfection of gas-turbine engines (GTE) of transport plants by application of principles of the cascade pressure exchange (CPE) for air compression in the working cycle of gas-turbine plant have been analyzed. The principle of action and performances of work of heat compressor CPE realizing compression of working body on the whole at the expense straight convert inputting heat in disposing work of torrent with insignificant distraction mechanics work from shaft selection of power has been described. The results of computational investigation of four variants of the GTE working process organization on the basis of the two-staged compression assembly with intermediate cooling and heating of air-gas medium have been adduced. Application of units CPE in the capacity of compressing stage GTE opens the prospect of adaptations GTE performance by conditions of work in the capacity of forcing units of overland transport.

Słowa kluczowe

PL

kaskadowa wymiana ciśnienia; gazo-turbinowe silniki; cykl pracy; energooszczędność; wydajność

EN

cascade pressure exchange; gas turbine engines; working cycle; power efficiency; performance; self-cooling

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Transport Problems
• Rocznik: 2011
• Tom: T. 6, z. 2
• Strony: 107--119
• Opis fizyczny: Bibliogr. 23 poz.

Twórcy

autor

Krajniuk A.

• East-Ukrainian National University named after V. Dal Molodyozhny blońk, 20a, Lugansk, 91034, Ukraine,

Bibliografia

• 1. Mathis. G.P.: Wave enhanced Gas Turbine Engine Cycles. M. S. thesis, Cornell University, Ithaca, New York, 1991.
• 2. Wilson J. and Paxson D.E.: Jet engine Performance Enhancement through Use of a Wave-Rotor Topping Cycle. NASSA TM-4486, 1993.
• 3. Paxon D.E.: A Numerical of the Startup Transient in Wave Rotor. ASME J. Gas Turbines Power, 119(3), 1997, pp. 676-682.
• 4. Akbari P., Muller N.: Performance investigation of small gas turbine engines topped with wave rotor. 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and exhibit 20-23 July 2003, Huntsville, Allabama, AIAA2003-4414, 2003.
• 5. Akbari P., Nalim M.R., Muller N.: Performance Enhancement of Micro turbine Engines Topped With Wave Rotors. ASME J. Eng. Gas Turbines Power, 128(1), 2006, pp. 190-202.
• 6. Akbari P., Nalim M.R., Muller N.: A Review of Wave Rotor Technology and its Application. ASME J. Eng. Gas Turbines Power, 128(10), 2006, pp. 717-734.
• 7. Meyer A.: Recent Developments in Gas Turbines. Journal of Mechanical Engineering, 69, No 4, 1947, pp. 273-277.
• 8. Weber H.E.: Shock Wave Engine Design. John Wiley and Sons, New York, 1995.
• 9. Mayer A., Oda J., Kato K., Haase W., Fried R.: Extruded Ceramic – A New Technology for the Comprex Rotor. SAE Paper 890452, 1989.
• 10. Zehnder G., Meyer A., Mathews L.: The Free Running Comprex. SAE Paper 890452, 1989.
• 11. Benini E., Toffolo A., Lazzaretto A.: Centrifugal Compressor of A 100KW Micro turbine: Part 1-Experimental and Numerical Investigation on Overall Performance. ASME Paper GT2003-38152, 2003.
• 12. Rogers C.: Some Effects of Size on the Performance of Small Gas Turbine. ASME Paper GT2003-38027, 2003.
• 13. Welch G.E.: Overview of Wave-Rotor Technology for Gas Turbine Engine Topping Cycles. Novel Aero Propulsion Systems International Symposium, The Institution of Mechanical Engineers, London, 2000, pp. 2-17.
• 14. Крайнюк А.И., Сторчеус Ю.В.: Системы газодинамического наддува. Луганск: Изд-во ВУГУ, 2000, c. 224.
• 15. Kljus O.V., Krajniuk A.I., Alekseev S.V.: The principle of organization of work process of cascade compression unit and its application. Scientific journals Maritime University of Szczecin, 14(86), 2008, pp. 25-29.
• 16. Крайнюк А.И., Алексеев С.В., Брянцев М.А.: Особенности рабочего процесса каскадного обменника давления. Вісн. Східноукр. Нац. Ун-ту імені Володимира Даля, No 8(90), 2005, С. 176-179.
• 17. Krajniuk A.I.: Thermal compressor of cascade exchange by pressure. Silesian University of Technology, Faculty of Transport. International Scientific Conference. Transport Problems, Katowice-Kroczyce, 2009, pp. 186-191.
• 18. Крайнюк А.И., Крайнюк А.А.: Новый принцип организации рабочего процесса систем кондиционирования воздуха железнодорожного и морского трaнспорта. Silesian University of Technology, Faculty of Transport. VIII Scientific Conference Telematics, Logistics and Transport Safety, Katowice-Cieszyn, 2008, pp.64-68.
• 19. Брянцев М.А., Крайнюк А.А.: Использование принципов каскадного обмела давлением в рабочем цикле газовых холодильных машин. Двигатели внутренненго сгорания, Научно-технический журнал. Харков, НТУ «ХПИ».No 1, 2008, C.-57-61.
• 20. Крайнюк А.И.: Новые схемы и принципы организации рабочих процессов теплоэнергетических машин. Вiсник Схiдноукраїнського національного університету ім. В.Даля, Луганськ, Вид-цтво СНУ, 2010. - № 3 (145). Ч.2.- С.-187-204.
• 21. Крайнюк О.І., Крайнюк А.О.: Генератор газів. Патент UA No 36127, 2008.
• 22. Крайнюк А.И., Алексеев С.В., Брянцев М.А., Крайнюк А.А., Данилейченко А.А.: Система наддува транспортного ДВС с каскадным обменником давления., Вiсник Схiдноукраїнського національного університету ім.В.Даля, Луганськ, Вид-цтво СНУ, No 7(125). Ч.2, 2008, с. 197-200.
• 23. Крайнюк А.И., Алексеев С.В., Крайнюк А.А.: Система наддува ДВС с глубоким охлаждением наддувочного воздуха. Двигатели внутренненго сгорания, Научно-технический журнал. Харков, НТУ «ХПИ», №2, 2009, с. 59-65.