Preparation of Fe-Co-based bulk amorphous alloy from high purity and industrial raw materials

• Autorzy: Lesz S.
• Języki publikacji: PL

Abstrakty

EN

The main aim of the paper was preparation of Fe-Co-based bulk amorphous alloy from high purity and industrial raw materials by an ejection copper mold casting method.

Słowa kluczowe

PL

materiały amorficzne; wysokiej czystości materiały przemysłowe; XRD; SEM i LM metody; mikrotwardość

EN

amorphous materials; high purity and industrial materials; XRD; SEM and LM method; microhardness

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2011
• Tom: Vol. 48, nr 2
• Strony: 77--88
• Opis fizyczny: Bibliogr. 21 poz.

Twórcy

autor

Lesz S.

• Division of Nanocrystalline and Functional Materials and Sustainable Pro-ecological Technologies, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] A. Inoue, B.L. Shen, C.T. Chang, Fe- and Co-based bulk glossy alloys with ultrahigh strength of over 4000 MPa, Intermetallics 14 (2006) 936-944.
• [2] M. Stoica, R. Li, A.R. Yavari, G. Vaughan, J. Eckert, N.V. Steenberge, D.R. Romera, Thermal stability and magnetic properties of FeCoBSiNb bulk metallic glasses, Journal of Alloys and Compounds 504S (2010) S123-S128.
• [3] W. Pilarczyk, R. Nowosielski, R. Babilas, An attempt of selected metallic glasses producing with Fe and Ni matrix, Archives of Materials Science and Engineering 41/1 (2010) 5-12.
• [4] R. Nowosielski, R. Babilas, Preparation, structure and properties of Fe-based bulk metallic glasses, Journal of Achievements in Materials and Manufacturing Engineering 40/2 (2010) 123-130.
• [5] R. Nowosielski, R. Babilas, Glass-forming ability analysis of selected Fe-based bulk amorphous alloys, Journal of Achievements in Materials and Manufacturing Engineering 42 (2010) 66-72.
• [6] R. Babilas, R. Nowosielski, Iron-based bulk amorphous alloys, Archives of Materials Science and Engineering 44/1 (2010) 5-27.
• [7] S. Lesz, D. Szewieczek, J. Tyrlik-Held, Correlation between fracture morphology and mechanical properties of NANOPERM alloys, Archives of Materials Science and Engineering 29/2 (2008) 73-80.
• [8] S. Lesz, S. Griner, R. Nowosielski, Influence of geometry of rapidly solidified rods on properties of Fe-Co-based alloy, Journal of Achievements in Materials and Manufacturing Engineering 41 (2010) 16-25.
• [9] S. Lesz, Z. Stokłosa, R. Nowosielski: Influence of copper addition on properties of (Fe36Co36B19Si5Nb4)100-xCux metallic glasses, Archives of Materials Science and Engineering 38/1 (2009) 12-18.
• [10] Z.H. Gan, H.Y. Yi, J. Pu, J.F.Wang, J.Z. Xiao, Preparation of bulk amorphous Fe-Ni-P-B-Ga alloys from industrial raw materials, Scripta Materialia 48 (2003) 1543-1547.
• [11] H. Li, S. Yi, Fabrication of bulk metallic glasses in the alloy system Fe-C-Si-B-P-Cr-Mo-Al using hot metal and industrial ferro-alloys, Materials Science and Engineering A 449-451 (2007) 189-192.
• [12] Y. Hu, M.X. Pan, L. Liu, Y.H. Zhao, D.Q. Zhao, W.H. Wang, Synthesis of Fe-based bulk metallic glasses with low purity materials by multi-metalloids addition, Materials Letters 57 (2003) 2698-2701.
• [13] V. Ponnambalam, S.J. Poon, G.J. Shiflet, Fe-based bulk metallic glasses with diameter thickness larger than one centimeter, Journal of Materials Research 19/5 (2004) 1320-1323.
• [14] Z.P. Lu, C.T. Liu, J.R. Thompson, W.D. Porter, Structural Amorphous Steels, Physical Review Letters 92/24 (2004) 245503-1- 245503-4.
• [15] D.Y. Liu, W.S. Sun, H.F. Zhang, Z.Q. Hu, Preparation, thermal stability and magnetic properties of Fe-Co-Ni-Zr- Mo-B bulk metallic glass, Intermetallics 12 (2004) 1149- 1152.
• [16] S.F. Guo, L. Liu, X. Lin, Formation of magnetic Fe-based bulk metallic glass under low vacuum, Journal of Alloys and Compounds 478 (2009) 226-228.
• [17] W. Pilarczyk, R. Nowosielski, A. Januszka, Structure and properties of Fe-Cr-Mo-C bulk metallic glasses obtained by die casting method, Journal of Achievements in Materials and Manufacturing Engineering 42 (2010) 81-87.
• [18] P. Kwapuliński, J. Rasek, Z. Stokłosa, G. Badura, B. Kostrubiec, G. Haneczok, Magnetic and mechanical properties in FeXSiB (X=Cu, Zr, Co) amorphous alloys, Archives of Materials Science and Engineering 31/1 (2008) 25-28.
• [19] W.J. Boettinger, U.R. Kattner, K.-W. Moon, J.H. Perepezko, DTA and Heat flux DSC Measurements of Alloy Melting and Freezing, National Institute of Standards and Technology Special Publication 960-15 (2006).
• [20] PN-EN ISO 6507-1:2007.
• [21] J.T. Fan, Z.F. Zhang, S.X. Mao, B.L. Shen, A. Inoue, Deformation and fracture behaviors of Co-based metallic glass and its composite with dendrites, Intermetallics 17 (2009) 445-452.