Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Development of a new generation tool materials on the basis of M2 high speed-steel or 41Cr4 steel covered with the carbides. Application of pressureless forming of powder as a manufacturing method of anti-wear coatings gives the possibility to produce this materials with relative low cost of production.
Wydawca
Rocznik
Tom
Strony
49--55
Opis fizyczny
Bibliogr. 26 poz.
Twórcy
autor
- Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland, grzegorz.matula@polsl.pl
Bibliografia
- [1] L.A. Dobrzański, E. Hajduczek, J. Marciniak, R. Nowosielski, Physical metallurgy and heat treatment of tool materials, WNT, Warsaw, 1990 (in Polish).
- [2] M. Boccalini, Jr., H. Goldenstein, Solidification of high speed steels, International Materials Reviews 46/2 (2001) 92-115.
- [3] G. Matula, L.A. Dobrzański, A. Várez, B. Levenfeld, J.M. Torralba, Comparison of structure and properties of the HS12-1-5-5 type high-speed steel fabricated using the pressureless forming and PIM methods, Journal of Materials Processing Technology 162-163 (2005) 230-235.
- [4] L.A. Dobrzański, G. Matula, A. Várez, B. Levenfeld, J.M. Torralba, Structure and mechanical properties of HSS HS6-5-2- and HS12-1-5-5-type steel produced by modified powder injection moulding process, Journal of Materials Processing Technology 157-158 (2004) 658-668.
- [5] A. Várez, J. Portuondo, B. Levenfeld, J.M. Torralba, Processing of P/M T15 high speed steels by mould casting using thermosetting binders, Materials Chemistry and Physics 67 (2001) 43-48.
- [6] L.A. Dobrzański, G. Matula, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba, Injection Moulding of HS12-1-5-5 high-speed using a PW-HDPE based binder 12th Scientific International Conference “Achievements in Mechanical and Materials Engineering” AMME’2003, Gliwice-Zakopane, 2003.
- [7] F. Petzoldt, Metal injection moulding in Europe: ten facts that you need to know, Powder Injection Moulding International 1/2 (2007) 23-28.
- [8] R.M. German, Global research and development in powder injection moulding, Powder Injection Moulding International 1/2 (2007) 33-36.
- [9] R.M. German, A-Z of Powder Metallurgy, Great Britain, 2005.
- [10] R.M. German, A. Bose, Injection Molding of Metals and Ceramics, MPIF, Princeton, 1997.
- [11] G. Matula, L.A. Dobrza??ski, A. Varez, B. Levenfeld, Development of a feedstock formulation based on PP for MIM of carbides reinforced M2, Journal of Achievements in Materials and Manufacturing Engineering 27/2 (2008) 195-198.
- [12] Xuanhui Qu, Jianxiang Gao, Mingli Qin , Changming Lei, Application of a wax-based binder in PIM of WC-TiC-Co cemented carbides, International Journal of Refractory Metals & Hard Materials 23 (2005) 273-277.
- [13] E.M. Ruiz-Navas, R. Garcia, E. Gordo, F.J. Velasco, Development and characterisation of high-speed steel matrix composites gradient materials, Journal of Materials Processing Technology 143-144 (2003) 769-775.
- [14] Z.Y. Liu, N.H. Loh, K.A. Khor, S.B. Tor, Sintering of injection molded M2 high-speed steel, Materials Letters 45 (2000) 32.
- [15] B. Šuštaršic, L. Kosec, M. Kosec, B. Podgornik, S. Dolinšek, The influence of MoS2 additions on the densification of water-atomized HSS powders, Journal of Materials Processing Tech. 173/3 (2006) 291-300.
- [16] G. Herranz, G. Matula, R Alonso, I. Sánchez, G. Rodríguez, Metal lnjection Moulding of Carbides Reinforced M2 HSS, Euro PM 2009 - Powder Injection Moulding - Compounds and Composite Parts, 99-104.
- [17] G. Matula, L.A. Dobrza??ski, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Influence of Binders on the Structure and Properties of High Speed-Steel HS6-5-2 Type Fabricated Using Pressureless Forming and PIM Methods, Materials Science Forum 534-536 (2007) 693-696.
- [18] L.A. Dobrzański, J. Mikuła, Structure and properties of PVD and CVD coated Al2O3 + TiC mixed oxide tool ceramics for dry on high speed cutting processes, Journal of Materials Processing Technology 164-165 (2005) 822-831.
- [19] M. Sokovic, J. Kopac, L.A. Dobrzański, M. Adamiak: Wear of PVD-coated solid carbide end mills in dry high-speed cutting, Journal of Materials Processing Technology 157-158 (2004) 422-426.
- [20] G. Matula, Study of steel matrix composites with (Ti,Al)N gradient PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering 34 (2009) 79-86.
- [21] L.A. Dobrzański, M. Polok, M. Adamiak: Structure and properties of wear resistance PVD coatings deposited onto X37CrMoV5-1 type hot work steel, Journal of Materials Processing Technology 164-165 (2005) 843-849.
- [22] L.A. Dobrzański, K. Gołombek, Structure and properties of the cutting tools made from cemented carbides and cermets with the TiN+mono-, gradient- or multi(Ti, Al, Si)N+TiN nanocrystalline coatings, Journal of Materials Processing Technology 164-165 (2005) 805-815.
- [23] C.H. Lin, J.G. Duh and J.W. Yeh, Multi-component nitride coatings derived from Ti-Al-Cr-Si-V target in RF magnetron sputter, Surface and Coatings Technology 201 (2007) 6304-6308.
- [24] L.A. Dobrzański, M. Bonek, M. Piec, E. Jonda: Diode Laser Modification of Surface Gradient Layer Properties of a Hot-work Tool Steel, Materials Science Forum 532-533 (2006) 657-660.
- [25] M. Piec, L.A. Dobrzański, K. Labisz, E. Jonda, A. Klimpel: Laser Alloying with WC Ceramic Powder in Hot Work Tool Steel using a High Power Diode Laser (HPDL), Advanced Materials Research 15-17 (2007) 193-198.
- [26] L.A. Dobrzański, K. Labisz, M. Piec, A. Klimpel, Mechanical properties of the surface layer of the laser alloyed 32CrMoV12-28 steel, Archives of Materials Science and Engineering 29/1 (2008) 57-60.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSL9-0047-0007