Compupational modelling of the hip joint in reference to clinical requirements

• Autorzy: Vaverka M. , Vrbka M. , Navrat T. , Florian Z.
• Konferencja: Applied Mechanics 2003, Gliwice, Polska
• Języki publikacji: EN

Abstrakty

EN

A lot of disorders of the hip, especially in young patients, can be treated with a suitable osteotomy, which is based on the improvement of mechanical conditions in the hip joint. The surface replacement has also been developed as an alternative to a total hip replacement for young and more active people. Two finite element (FE) models are presented in this paper. The first one offers solutions to the strain-stress analysis of the physiological hip joint. The second one enables us to investigate strain and stress parameters in the hip joint with applied surface replacement.

Słowa kluczowe

EN

compupational modelling; hip joint; clinical requirements

• Wydawca: Wydawnictwo Katedry Mechaniki Stosowanej
• Czasopismo: Zeszyty Naukowe Katedry Mechaniki Stosowanej / Politechnika Śląska
• Rocznik: 2003
• Tom: nr 21
• Strony: 201--206
• Opis fizyczny: Bibliogr. 3 poz.

Twórcy

autor

Vaverka M.

• Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno, University of Technology

autor

Vrbka M.

• Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno, University of Technology

autor

Navrat T.

• Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno, University of Technology

autor

Florian Z.

• Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno, University of Technology

Bibliografia

• [1]. Vaverka M., Vrbka M.: 3D-Modelling of the Hip Joint and its Strain and Stress Analysis Using FEM. Mechatronics, Robotics and Biomechanics 2001. Třešt, 2001.
• [2]. Návrat T., Florian Z.: Stress - Strain Analysis of Total Surface Replacement of the Hip Joint. Biomechanics of Man 2002. Čejkovice, 2002.
• [3]. Kršek P.: Possibilities of Creation of FEM Models from CT/MR Data. Engineering Mechanics 2000. Svratka 2000.