Analiza rozwiązań sprzętowych i programowych w funkcji wiarygodności wyników badań eksperymentalnych w trakcie badania sił skrawania i temperatury w procesie skrawania

• Autorzy: Kuzinovski M. , Tomov M. , Trajcevski N. , Cichosz P.

Warianty tytułu

EN

Analysis of hardware and software solutions in function of the reliability of experimental research results during investigation of cutting forces and temperature in the cutting process

• Języki publikacji: EN

Abstrakty

EN

The paper describes a procedurę for computer aided measurement and analysis of cutting forces and temperature in the cutting process by machining with turning, by using own software and hardware developed solutions. Denoted are possible so-urces of errors in the proposed software and hardware solutions. There are proposed solutions for reducing of the domain of the measurements results scattering. Given are recommendations for introduction and calculation of the uncertainty of the result of experimental researches.

PL

W artykule opisano procedurę wspomagania komputerowego pomiaru i analizy sił skrawania i temperatury w procesie skrawania w obróbce toczenia, przy użyciu własnego rozwiązania sprzętowego oraz własnego oprogramowania. Wyznaczono że są możliwe źródła błędów w proponowanych rozwiązaniach sprzętowych i programistycznych. Zaproponowano rozwiąznia w celu zmniejszenia obszaru wyników pomiarów rozpraszania. Podano zalecenia dotyczące wprowadzania i obliczania niepewności wyników badań eksperymentalnych.

Słowa kluczowe

EN

cutting forces; cutting process

PL

siły skrawania; proces skrawania; wspomaganie komputerowe

• Wydawca: Instytut Górnictwa Odkrywkowego "Poltegor-Instytut"
• Czasopismo: Górnictwo Odkrywkowe
• Rocznik: 2010
• Tom: R. 51, nr 3
• Strony: 148--153
• Opis fizyczny: Bibliogr. 19 poz.

Twórcy

autor

Kuzinovski M.

autor

Tomov M.

autor

Trajcevski N.

autor

Cichosz P.

• Ss. Cyril and Methodius, University in Skopje, Faculty of Mechanical Engineering, Macedonia

Bibliografia

• [1] Kuzinovski M., Trajćevski N., Cichosz R: Investigation of cutting forces during machining process by high speed turning,l0th International Scientific Conference, MMA2009, Novi Sad, Srebia, October 9-10, 2009. ISBN: 978-86-7892-221-pp.52-55.
• [2] Pavlovski, V., Kuzinovski, M., Zebrovski, H., Cichosz, R: Experimental research of the physical phenomena in turning with ceramic cutting inserts, Third International Conference on advanced manufacturing systems and technology, AMST'93, Udine, Italy, 1993.
• [3] Trajćevski N., Kuzinovski M., Cichosz R: Investigation of temperature during machining process by high speed turning, l0th International Scientific Conference, MMA2009, Novi Sad, Srebia, October 9-10, 2009. ISBN: 978-86-7892-223 X pp.86-89.
• [4] Axinte D. A., Belluco W., De Chiffre L.: Evaluation of cutting force uncertainty components in turning, International Journal of Machine Tools & Manufacture 41,2001, Elsevier Science Ltd. p. 719-730.
• [5] Kuzinovski M., Trajćevski N., Fita S., Tomov M.: Monitoring System in the Experimental Investigations of the Temperature in the Cutting Process by Machining with Turning, Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations, May 11-12, 2006, Bied, Slovenia, page 427-430.
• [6] Kuzinovski M., Trajćevski N., Filiposki V., Cichosz R: Computer aided system for investigation of cutting forces and temperature in turning, VIII Międzynarodowa Konferencja Naukowa "Komputerowe Wspomaganie Prac Inżynierskich". NR-7-8,21-24 czerwca 2006, Polanica Zdrój, page 10-14.
• [7] Kuzinovski M., Trajćevski N., Cichosz R, Tomov M.: Monitoring System for Investigation of the Cutting Forces in the Machining With Turning, 9th International Scientific Conference, MMA2006, Novi Sad, Srbija i Crna Gora, 15-16 Jun-2006, page 19-20.
• [8] Kuzinovski M.: PATENT MKP B23Q 11/14, G01K 13/08, 900600, 30.09.2000.
• [9] Kuzinovski, M., Zebrovski, H., Cichosz, P., Rosienkievicz R: Determination of the thermoelectric characteristic of the thermocouple carbon steel - mixed ceramics for temperature measurement during cutting process, Proceedings, Faculty o' Mechanical Engineering, Skopje,12, No. 13, pp. 45 - 48 (1993).
• [10] Guide of the Expression of Uncertainty of Measurement, International Organization for Standardization, 1993.
• [II] Jakubiec J.: Linearity error as component of A/D converter uncertainty, Metrology and measurement systems, Vol.Number 3,2008.
• [12] Trajćevski, N.: Monitoring system in experimental investigation in machining with turning, Master thesis, Skopje, Februan 2008.
• [13] Cichosz R: Methods of temperature measurement in high-speed turning, VI Ogólnopolska Konferencja Naukowo-Techniczna pt: "Tendencje Rozwojowe w Technologii Maszyn", Zielona Góra, 20-22.09.1990, s.l17-122.
• [14] Kuzinovski M., Cichosz R, Zebrowski H.: Transmission of the signal from the workpiece at measurement of the temperature in the process of turning, Proceedings, Faculty of Mechanical Engineering, Skopje,16, No. 2, pp. 107 - 112 (1997).
• [15] Kuzinovski M., Trajćevski N., Filiposki V., Cichosz R: Developing a data acquisition system for force and temperature measurement in the cutting process by machining with turning, 8th International scientific conference, "New ways in manufacturing technologies 2006", 22-23.06.2006, Presov, Slovak Republic, page 78-81.
• [16] Kuzinovski M., Trajćevski N., Cichosz P.: Automation of experimental researches of physical phenomena in cutting process by machining with turning, Proceedings of the 32nd Conference on Production Engineering with foreign participants, Novi Sad. Serbia, 18-20.09.2008. ISBN: 978-86-7892-131-5, pp. 69 72.
• [17] Jurković, Z., Jurković, M.: Modeling and simulation of the cutting force using experimental data, 7th International Research/Expert Conference "Trends in the Development of Machinery an Associated Technology", TMT 2003, pages 81-84, Lloret de Mar, Barcelona, Spain, 15-16 September, 2003.
• [18] Kuzinovski M.: Investigation of physical phenomena and technological effects during turning process by increased cutting speed, PhD Thesis, Faculty of Mechanical Engineering - Skopje, 1991.
• [19] Jermelniak K., Zawistowski J.: Substantiaton of logarithmic data transformation for T-v relationship estimation, Prace Naukowe Instytutu Technologii Maszyn i Automatyzacji Politechniki Wrocławskiej, 1986, p. 114-119.