PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A study of water coning control in oil well by injected barrier and downhole water sink technology

Identyfikatory
Warianty tytułu
PL
Studium ograniczania stożków zawodnieniowych w otworach naftowych przy zastosowaniu bariery iniekcyjnej technologii odwadniania dna otworu
Języki publikacji
EN
Abstrakty
EN
A numerical simulation of heavy oil recovery process developed in this work to investigate the time dependent development and dynamic shape of the water-oil interface around the well producing from a bottom-water-drive homogenous reservoir. The objectives of this study: developing a numerical model demonstrating water coning; placement of a drainage completion under the barrier, and perform a parametric study of a combined gel barrier placement with water drainage; ascertainment of the ability of a horizontal gel barrier to prevent water breakthrough; investigation of the performance of the gel barrier shut off technology associated with the Downhole Water Sink (DWS) technology; investigation the impermeable manmade barrier shut off and DWS methods' impact on the breakthrough time, and the critical rate; investigation of the effect of barrier radial size; demonstration of barrier-drainage system efficiency etc.
PL
Przedstawiono numeryczny model procesu pozyskiwania ropy z jednorodnego złoża z wodą denną. Pozwala on prześledzić zmiany i rozwój granicy woda-ropa wokół otworu eksploatacyjnego. Uzyskane rezultaty potwierdzają przydatność modelu do analizy wpływu zastosowania bariery iniekcyjnej i technologii odwadniania dna otworu (DWS) na ograniczenie tendencji do tworzenia się stożków nawodnieniowych.
Rocznik
Tom
Strony
19--26
Opis fizyczny
Bibliogr. 4 poz.
Twórcy
autor
autor
  • Al-Farabi Kazakh National Technical University, al-Farabi ave. 71 050038 Almaty Tel. +7 (3272) 47 14 88, tksveta@mail .ru
Bibliografia
  • 1. Bocharov O.B., Telegin I.G.: Numerical modeling of thermo-capillary countercurrent impregnation, Thermo physics and aeromechanics, 2005, volume 12, Na 3.
  • 2. Siddiqi, S. S. and Wojtanowicz, A. K.: A Study of Water Coning Control in Oil Wells by Injected or Natural Flow Barriers Using Scaled Physical Model and Numerical Simulator, SPE 77415, presented at the SPE Annual Technical Conference and Exhibition held in San Antonio, Texas, 29 September-2 October 2002.
  • 3. Zhumagulov B.T., Monakhov V.N.: The Fluid Dynamics of Oil Production: Translated & ed. by AgipK CO. - Milan: Interservice, 2003, p. 307.
  • 4. Hernandez Juan C: Oil Bypassing by Water Invasion to Wells: Mechanisms and Remediation, PhD Dissertation, August 2007.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSL9-0033-0036
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.