Estimation of stresses in layers of dentures' relining materials

• Autorzy: Żmudzki J. , Chladek W. , Krukowska J.
• Języki publikacji: PL

Abstrakty

EN

Purpose: Durability tests of materials relining dentures should be carried out in conditions reflecting the real loading that accompanies bite force transmission. The influence of geometry resulting from a denture foundation shape on real stresses in relining has not been so far found. Design/methodology/approach: Using FEM modeling, identified were the stress levels in relining layers in conditions reflecting biting loading for two opposite cases of bone foundation atrophy. Findings: The equivalent Huber-Mises` stresses have not reached their critical values, although tangential stresses on the interfacial where relining is bonded with denture base have reached 440kPa, which, for some of the commercial types of relining denotes the bonding strength. Research limitations/implications: The linear elastic mechanical characteristics were assumed. Hence, during further research, taken into account should be the “stiffening” of characteristics in the upper loadings range, which is typical for silicones. Practical implications: In case of a convex foundation the biggest danger will be caused by any bond defects occurring in the central area because in that area shear of bond has reached the highest values. Originality/value: Values of stresses components identified in this paper reflect the real shear conditions of relining bonding with denture base and might constitute a determinant for strength tests.

Słowa kluczowe

PL

biomateriały; wymiana protez; siła

EN

biomaterials; denture relining; strength; biting load

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2008
• Tom: Vol. 30, nr 1
• Strony: 21--24
• Opis fizyczny: Bibliogr. 18 poz.

Twórcy

autor

Żmudzki J.

autor

Chladek W.

autor

Krukowska J.

• Department of Technological Processes Modelling and Medical Engineering, Faculty of Materials Science and Metallurgy, Silesian University of Technology, ul. Krasińskiego 8, 40-019 Katowice, Poland,

Bibliografia

• [1] D. Lemmon, T.Y. Shiang, A. Hashmi, J.S. Ulbrecht, P.R Cavanagh, The effect of insoles in therapeutic footwear: a finite element approach, Journal of Biomechanics 30 (1997) 615-620.
• [2] I. Knets, V. Krilova, R. Cimdins, L. Berzina, V. Vitins, Stiffness and strength of composite acrylic bone cements, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 135-138
• [3] C.C. Lin, C.H. Chang, C.L. Wu, K.C. Chung, I.C. Liao, Effects of liner stiffness for trans-tibial prosthesis: a finite element contact model, Medical Engineering Physics 26 (2004) 1-9.
• [4] W. Walke, Z. Paszenda, J. Marciniak, Optimisation of geometrical features of coronary stent with the use of finite elements method, Proceedings of the 12th International Scientific Conference “Achievements in Mechanical and Materials Engineering” AMME’2003, Gliwice – Zakopane, 2003, 1011-1016.
• [5] H. Murata, J.F. McCabe, N.J. Jepson, T. Hamada, The influence of immersion solutions on the viscoelasticity of temporary soft lining materials, Dental Materials 12 (1996) 19-24.
• [6] S. Canay, N. Hersek, I. Tulunoglu, G. Uzun, Evaluation of colour and hardness changes of soft lining materials in food colorant solutions, Journal of Oral Rehabilitation 26 (1999) 821-829.
• [7] N.J. Jepson, J.F. McCabe, R.M. Basker, A new temporary soft lining material. Journal of Dentistry 23 (1995) 123-126.
• [8] J.F. McCabe, A polyvinylsiloxane denture soft lining material, Journal of Dentistry 26 (1998) 521-526.
• [9] M.G. Waters, R.G. Jagger, Mechanical properties of an experimental denture soft lining material, Journal of Dentistry 27 (1999) 197-202.
• [10] C. Hekimoglu, N. Anil, The effect of accelerated ageing on the mechanical properties of soft denture lining materials, Journal of Oral Rehabilitation 26 (1999) 745-748.
• [11] P.M. Gronet, C.F. Driscoll, S.O. Hondrum, Resiliency of surface-sealed temporary soft denture liners, Journal of Prosthetic Dentistry 77 (1997) 370-374.
• [12] P.J. Prendergast, S.A. Maher, Issues in pre-clinical testing of implants, Journal of Materials Processing Technology 118 (2001) 337-342.
• [13] C.W.J. Oomens, O.F.J.T. Bressers, E.M.H. Bosboom, C.V.C. Bouten, D.L. Bader, Can loaded interface characteristics influence strain distributions in muscle adjacent to bony prominences Computer Methods in Biomechanics and Biomedical Engineering 6 (2003) 171-180.
• [14] T. Smolnicki, E. Rusiński, J. Karoliński, FEM modelling of fatigue loaded bolted flange joints, Journal of Achievements in Materials and Manufacturing Engineering 22/1 (2007) 69-72.
• [15] J. Okrajni, M. Plaza, S. Ziemba, Computer modelling of the heat flow in surgical cement during endoprosthesoplasty, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 311-314.
• [16] D. Siminiati, FEM numerical algorithm on contact problem for non-conform elastic bodies, Proceedings of the 11th Scientific International Conference “Achievements in Mechanical and Materials Engineering” AMME'2002, Gliwice – Zakopane, 2002, 495-498.
• [17] E.R. Dootz, A. Koran, R.G. Craig, Comparison of the physical properties of 11 soft denture liners, Journal of Prosthetic Dentistry 67 (1992) 707-712.
• [18] A.L. Machado, L.C. Breeding, A.D. Puckett, Effect of microwave disinfection on the hardness and adhesion of two resilient liners, Journal of Prosthetic Dentistry 94 (2005) 183-189.