Flow simulation of the two-component plastic injection process with reinforced parts

• Autorzy: Mîndru T. T. , Ciofu C. , Nedelcu D.
• Języki publikacji: EN

Abstrakty

EN

This paper presents a simulation of two-component injection process for obtaining plastic parts with metallic reinforcement using a specific software package, MoldFlow. It will consider the following process parameters, mould temperature and injection pressure. The study will analyze the comparison between plastic parts with and without metallic reinforcement. It will highlight the differences that occur between the input parameters, mould temperature and injection pressure and the out parameters, cooling time and injection time for those types of parts obtained. Furthermore will be simulated a mechanical stresses of traction using a specific software package, Cosmos, for both parts obtained.

Słowa kluczowe

EN

injection process; plastics; metallic reinforcement; computer simulation; cosmos

PL

proces wtrysku; tworzywo sztuczne; wzmocnienie metaliczne; symulacja komputerowa; Cosmos

• Wydawca: Instytut Automatyzacji Procesów Technologicznych i Zintegrowanych Systemów Wytwarzania Politechniki Śląskiej
• Czasopismo: Wybrane Problemy Inżynierskie
• Rocznik: 2011
• Tom: nr 2
• Strony: 261--266
• Opis fizyczny: Bibliogr. 4 poz.

Twórcy

autor

Mîndru T. T.

autor

Ciofu C.

autor

Nedelcu D.

• Faculty Machine Manufacturing and Industrial Management, Technical University "Gheorghe Asachi" of Iasi, Iasi, Romania,

Bibliografia

• 1. Fetecău, C., Injectarea materialelor plastice, Bucharest, 2005, p. 127 - 156.
• 2. Şeres, I., 1996, Injectarea materialelor termoplastice, Imprimeria de Vest Publisher, Oradea (1996), p. 254 - 300.
• 3. Fetecau C., et all. Overmolding injection molding simulation of tensile test specimen, International Journal of Modern Manufacturing Technologies, Vol. II, No. 2/2010, Politehnium Publishing House, ISSN 2067-3604.
• 4. Plastics Data Charts - www.plastemart.com, Accesed: 23.04.2011.