Technology validation of coatings deposition onto the brass substrate

• Autorzy: Dobrzańska-Danikiewicz A. , Lukaszkowicz K.
• Języki publikacji: EN

Abstrakty

EN

manufacturing metallic-ceramic coatings in the process of physical vapor deposition (PVD) on the CuZn40Pb2 brass substrate. The amount of layers applied to the substrate was adopted as the criterion for technology division, thus obtaining three technology groups for foresight researches. Design/methodology/approach: The carried out foresight-materials science researches included creating a dendrological matrix of technology value, a meteorological matrix of environment influence, a matrix of strategies for technologies, laying out strategic development tracks, carrying out materials science experiments which test the mechanical and tribological properties and the resistance to corrosion and erosion of brass covered with a varied number of layers applied using the method of reactive magnetron evaporation, as well as preparing technology roadmaps. Findings: High potential and attractiveness were shown of the analyzed technologies against the environment, as well as a promising improvement of mechanical and tribological properties and an increase of resistance to material corrosion and erosion as a result of covering with PVD coatings. Research limitations/implications: Researches pertaining to covering the brass substrate with PVD coatings is part of a bigger research project aimed at selecting, researching and characterizing priority innovative material surface engineering technologies. Practical implications: The presented results of experimental materials science researches prove the significant positive impact of covering with PVD coatings on the structure and mechanical properties, as well as the resistance to corrosion, erosion and abrasive wear of brass which leads to the justification of their including into the set of priority innovative technologies recommended for application in industrial practice, including in small and medium-size companies. Originality/value: The advantage of the article is the specification of the significance of the technology involving covering the brass substrate with mono- and multilayer PVD coatings against the environment, together with the recommended strategies of conduct, strategic development tracks and roadmaps of these technologies, taking into account the impact of the processes of applying these coatings onto the structure and the improvement of the properties of the tested surface layers.

Słowa kluczowe

EN

manufacturing; processing; thin coating; thick coating; foresight; technology roadmapping

PL

produkcja; przetwórstwo; cienka powłoka; powłoka gruba; foresight; roadmapping technologiczny

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2010
• Tom: Vol. 46, nr 1
• Strony: 5--38
• Opis fizyczny: Bibliogr. 107 poz.

Twórcy

autor

Dobrzańska-Danikiewicz A.

autor

Lukaszkowicz K.

• Faculty of Mechanical Engineering, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] Organization for Economic Co-operation and Development OECD, The Knowledge-Based Economy, Paris, 1999.
• [2] A. Dobrzańska-Danikiewicz, E-foresight of materials surface engineering, Archives of Materials Science and Engineering 44/1 (2010) 43-50.
• [3] J. Kisielnicki, MIS. Management Information Systems, Placet, Warsaw, 2008 (in Polish).
• [4] M. Hasan, E. Harris, Entrepreneurship and innovation in e-commerce, Journal of Achievements in Materials and Manufacturing Engineering 32/1 (2009) 92-97.
• [5] A.D. Dobrzańska-Danikiewicz, Foresight methods for technology validation, roadmapping and development in the surface engineering area, Archives of Materials Science Engineering 44/2 (2010) 69-86.
• [6] A. Dobrzańska-Danikiewicz, The methodological fundaments of development state analysis of surface engineering technologies, Journal of Achievements in Materials and Manufacturing Engineering 40/2 (2010) 203-210.
• [7] A. Dobrzańska-Danikiewicz, Main assumption of the foresight of surface properties formation leading technologies of engineering materials and biomaterials, Journal of Achievements in Materials and Manufacturing Engineering 34/2 (2009) 165-171.
• [8] A. Dobrzańska-Danikiewicz, Computer Integrated Foresight Researches Methodology in Surface Engineering Area, work in progress.
• [9] L.A. Dobrzański, Fundamentals of Materials Science and Metallurgy. Engineering Materials with fundamentals of Materials Design, WNT, Warsaw, 2006 (in Polish).
• [10] K. Lukaszkowicz, L.A. Dobrzański, A. Zarychta, Erosion resistance and tribological properties of coatings deposited by reactive magnetron sputtering method onto the brass substrate, Journal of Materials Processing Technology 157- 158 (2004) 380-387.
• [11] L.A. Dobrzański, A. Dobrzańska-Danikiewicz (eds.), Report from the realization of 2nd task „Analysis of the existing situation in terms of the development of technologies and social-economic conditions” with regard to the FORSURF project entitled Foresight of surface properties formation leading technologies of engineering materials and biomaterials, International OCSCO World Press, Gliwice, 2010 (in Polish).
• [12] L.A. Dobrzański, Shaping the structure and properties of engineering and biomedical material surfaces, International OCSCO World Press, Gliwice, 2009 (in Polish).
• [13] H. Dybiec, Submicrostructural aluminium alloys, AGH University Science-Didactic Publications, Cracow, 2008 (in Polish).
• [14] Z. Rdzawski, Alloyed Cooper, Silesian University of Technology Publishing, Gliwice, 2009 (in Polish).
• [15] I.P. Jain, G. Agarwal, Ion beam induced surface and interface engineering, Surface Science Report 66 (2011) 77- 172.
• [16] H. Garbacz, P. Wieciński, M. Ossowski, M.G. Ortore, T. Wierzchoń, K.J. Kurzydłowski, Surface engineering techniques used for improving the mechanical and trobological properties of the Ti6A14V alloy, Surface and Coatings Technology 202 (2008) 2453-2457.
• [17] W. Kwaśny, Predicting properties of PVD and CVD coatings based on fractal quantities describing their surface, Journal of Achievements in Materials and Manufacturing Engineering 37/2 (2009) 125-192.
• [18] P. Podsiadlo, G.W. Stachowiak, Fast classification of engineering surface without surface parameters, Tribology International 39 (2006) 1624-1633.
• [19] C. Donnet, A. Erdemir, Solid lubricant coating: recent development and future trends, Tribology Letters 17 (2004) 389-397.
• [20] X. Mou, K. Peng, J. Zeng, L. Shaw, K.W. Qian, The influence of the equivalent strain on the microstructure and hardness of H62 brass subjected to multi-cycle constrained groove pressing, Journal of Materials Processing Technology 211 (2011) 590-596.
• [21] L. Yohai, M. Vazquez, M.B. Valcarce, Brass corrosion in tap water distribution system inhibited by posphate ions, Corrosion Science 53 (2011) 1130-1136.
• [22] S. Li, H. Imai, H. Atsumi, K. Kondoh, Contribution of Ti addition to characteristic of extruded Cu40Zn brass alloy prepared by powder metallurgy, Materials and Design 32 (2011) 192-197.
• [23] R. Garg, S. Ranganathan, S. Satyam, Effect of mode of rolling on development of texture and microstructure in two-phase (α+ β) brass, Materials Science and Engineering A 527 (2010) 4582-4592.
• [24] E.V. Kuzmina, L.M. Zheleznyak, V.L. Bushuev, S.V. Fomin, Setting up the production of shape made of leaded brasses for parts of standard locks, Metallurgist 54 (2010) 248-251.
• [25] C. Mapelli, A. Gruttaduaria, M. Bellogini, Analysis of the factors involved in failure of a brass sleeve mounted on an electro-valve, Engineering Failure Analysis 17 (2010) 431- 439.
• [26] M. Uchidate, H. Liu, A. Iwabuchi, K. Yamamoto, Effect of water environment on tribological properties of DLC rubbed against brass, Wear 267 (2009) 1589-1594.
• [27] N.A. Sakharova, J.V. Fernandes, M.F. Vieira, Strain path and work-hardening bahavior of brass, Materials Science and Engineering 507 (2009) 15-22.
• [28] S. Jonas, S. Kluska, E. Drągalska, E. Walasek, A. Czyżewska, G. Krupa, Infiltration of porous materials using the CVI method, Materials Engineering 6 (2008)760-763.
• [29] M. Blicharski, Surface engineering, WNT, Warsaw, 2009 (in Polish).
• [30] Group work, Electroplater's manual, WNT, Warsaw, 2002 (in Polish).
• [31] J. Wang, K. de Groot, C. van Blitterswijk, J. de Boer, Electrolytic deposition of lithium into calcium phosphate coatings, Dental Materials 52 (2009) 353-359.
• [32] M.-J. Jiao, X.-X. Wang, Electrolytic deposition of magnesium-substituted hydroxyapatite crystals on titanium substrate, Materials Letter 63 (2009) 2286-2289.
• [33] T. Paulmier, J.M. Bell, P.M. Fredericks, Plasma electrolytic deposition of titanium dioxide nanorods and nano-particles, Journal of Materials Processing Technology 208 (20008) 117-123.
• [34] C. Mansilla, Structure, microstructure and optical properties of cerium oxide thin films prepared by electron beam evaporation assisted with ion beams, Solid State Sciences 11 (2009) 1456-1464.
• [35] T.L. Wang, B.X. Liu, Glass forming ability of the Fe-Zr-Cu system studied by thermodynamic calculation and ion beam mixing, Journal of Alloys and Compounds 481 (2009) 156- 160.
• [36] Y. Batra, D. Kabiraj, S. Kumar, D. Kanjilal, Ion beam induced modification in GeOx thin films: A phase separation study, Surface and Coatings Technology 203 (2009) 2415- 2417.
• [37] H. Dong, T. Bell, State-of-the-art overview: ion beam surface modification of polymers towards improving tribological properties, Surface and Coatings Technology 111 (1999) 29-40.
• [38] D. Bieliński, P. Lipiński, L. Ślusarski, J. Grams, T. Paryjczak, J. Jagielski, A. Turos, N. Madi, Surface layer modification of ion bombarded HDPE, Surface Science 564 (2004) 179-186.
• [39] D.M. Bieliński, P. Lipiński, J. Jagielski, W. Okrój, L. Klimek, Selected examples of modifying the polymer substrate by means of ion bombardment, Materials Engineering 6 (2006) 1337-1342 (in Polish).
• [40] E. Knystautas (ed.), Engineering Thin Films and Nanostructures with Ion Beams, Taylors & Francis, BocaRaton - London - New York - Singapore, 2005.
• [41] S.D. Zilio, G.D. Giustina, G. Brustain, M. Tormen, Microlens arrays on large area UV transparent hybrid sol-gel materials for optical tools, Microelectronic Engineering 87 (2010) 1143-1146.
• [42] J.F. Pollock, K.E. Healy, Mechanical and swelling characterization of poly (N-isopropyl acrylamide-co-methoxy poly(ethylen glycol) methacrylate) sol-gels, Acta Biomaterialia 6 (2010) 1307-1318.
• [43] J.J. Livage, Sol-gel process, Current Opinion in Solid State and Materials Science 2 (1997) 132-138.
• [44] M. Krissanasaeranee, P. Supaphol, S. Wongkasemjit, Preparation of poly(vinyl alcohol)/tin glycolate composite fibers by combined sol-gel/electrospinning techniques and their conversion to ultrafine tin oxide fibers, Materials Chemistry and Physics 119 (2010) 175-181.
• [45] I. Piwoński, K. Soliwoda, The effect of ceramic nanoparticles on tribological properties of alumina sol-gel thin coatings, Ceramics International 36 (2010) 47-54.
• [46] K. Yao, W. Zhu, Barium titane glass-ceramic thin films integrated high-dielectric media, Thin Solid Films 408 (2002) 11-14.
• [47] B. Pietrzyk, Calcium-phosphate coating produced using a sol-gel method, Materials Engineering 6 (2008) 664-666.
• [48] J.D. Wrigth, J.M. Sommerdijk, Sol-Gel materials, Chemistry and Applications, Gordon and Breach Science Publishers, 2001.
• [49] C. Mai, H. Militz, Modification of wood with silicon compounds. Inorganic silicon compounds and sol-gel systems: a review, Wood Science Technology 37 (2004) 339-348.
• [50] J. Livage, D. Ganguli, Sol gel electrochromic coatings and devices: A review, Solar Energy Materials and Solar Cells 68 (2001) 365-381.
• [51] D. Chen, Anti-reflection (AR) coatings made by sol-gel processes: A review, Solar Energy Materials and Solar Cells 68 (2001) 313-336.
• [52] J. Jeleńkowski, T. Borowski, T. Babul, Changes in the indirect sphere during detonation spraying, Materials Engineering 6 (2008) 595-598 (in Polish).
• [53] T. Babul, S. Starev, Detonation spraying of DLC coatings, Materials Engineering 6 (2008) 601-604 (in Polish).
• [54] W. Żurawski, T. Burakowski, Microstructure of nanostructural carbide coatings applied supersonically, Materials Engineering 6 (2008) 608-610 (in Polish).
• [55] C. Senderowski, Z. Bojar, K. Szymański, B. Formanek, Researches of the structure and properties of multilayer coatings type NiAl/FeAl and NiCr/FeAl deposited using the HVOF method, Materials Engineering 6 (2008) 611-614 (in Polish).
• 56] W. Żórawski, Properties of coatings sprayed thermally, Materials Engineering 6 (2008) 619-623 (in Polish).
• [57] S. Morel, Intensification of taking over heat through walls sprayed with coatings of a high absorption and thermal conduction capability, Materials Engineering 6 (2008) 624-627 (in Polish).
• [58] A. Dudek, I. Przerada, Z. Ba􀃡aga, S. Morel, Crystallization of plasmically sprayed hydroxyapatite coating, Materials Engineering 6 (2008) 628-631 (in Polish).
• [59] A. Dudek, Characteristics of plasmically sprayed NiCrBSi coating, Materials Engineering 6 (2008) 632-636 (in Polish).
• [60] A. Pawłowski, W. Wołczyński, L. Górski, Morphology of thermally processed Al2O3-SiO2 structure plasmically sprayed on a metallic substrate, Materials Engineering 6 (2008) 637-639 (in Polish).
• [61] F. Chen, M. Liu, Preparation of yttria-stabilized zirconia (YSZ) films on La0,85Sr0,15MnO3 (LMS) and LMS-YSZ substrates using an electrophoretic deposition (EPD) process, Journal of the Ceramic Society 21 (2001) 127-134.
• [62] M. Zarbov, D. Brandon, N. Cohen, L. Shemesh, Engineering performance in applied EPD: problems and solutions, Journal of Materials Science 41 (2006) 8115-8112.
• [63] X. Su, A. Wu, P. Vilarinho, Titanium tellurite thick films prepared by electrophoretic deposition and their dielectric properties, Scripta Materialia 61 (2009) 536-539.
• [64] H. Yan, T. Jo, H. Okjuzaki, Synthesis and electrophoretic deposition of highdielectric-constant SrTiO3 nanoparticles, Colloids and Surfaces A: Physicochemical and Engineering Aspects 346 (2009) 99-105.
• [65] F. Bozza, R. Polini, E. Traversa, High performance anode-supported intermediate temperature solid oxide fuel cells (IT-SOFCs) with La0,8Sr0,2Ga0,8Mg0,2O3-δ electrolyte films prepared by electrophoretic deposition, Electrochemistry Communications 11 (2009) 1680-1683.
• [66] Y. Wang, L. Xu, N. Jiang, B. Xu, G. Gao, F. Li, Fabrication of plyoxometalate-based nano/micrometer composite film by electrophoretic deposition method, Journal of Colloid and Interface Science 333 (2009) 771-775.
• [67] J. Li, I. Zhitomirsky, Electrophoretic deposition of manganese oxide nanofibers, Materials Chemistry and Physics 112 (2008) 525-530.
• [68] L. Besra, M. Liu, A review on fundamentals and applications of electrophoretic deposition (EPD), Progress in Materials Science 52 (2007) 1-61.
• [69] S. Krąc, Ł. Cieniek, Impact of the laser radiation wavelength on the structure and properties of thin Bi2O3 layers created by means of the PLD technique, Materials Engineering 6 (2008) 564-571 (in Polish).
• [70] D. Chrisey, G. K. Hubler (eds.), Pulsed Laser Deposition of Thin Films, John Wiley and Son, 1994.
• [71] J.C. Miller, R.F. Haglund Jr. (eds.), Laser Ablation and Desorption, Vol. 30, Academic Press, San Diego, 1998.
• [72] R. Major, P. Lacki, J.M. Lackner, B. Major, Modeling and structural verification of thin layers based on titanium nitride obtained on a polymer substrate by means of a laser impulse, Materials Engineering 5 (2006) 1118-1120 (in Polish).
• [73] R. Kosydar, M. Kot, S. Zimowski, R. Major, W. Mróz, B. Major, Structure and tribological properties of layers based on boron nitride, set by means of a laser impulse on a polymer and metallic substrate, Materials Engineering 5 (2006) 1085-1088 (in Polish).
• [74] T. Burakowski, W. Napadłek, J. Marczak, Ablative Laser Cleaning in Areology - Up-to-date Condition and Prospects, Materials Engineering 3-4 (2007) 618-621.
• [75] T. Burakowski, W. Napadłek, J. Marczak, Ablative Laser Cleaning of Constructional Materials and Machine Elements, Materials Engineering 3-4 (2007) 622-626.
• [76] A. Bartnik, H. Fiedorowicz, R. Jarocki, J. Kostecki, R. Rakowski, M. Szczurek, Detection of surface changes of materials caused by intense irradiation with laser-plasma EUV source utilizing scattered or luminescent radiation excited with the EUV pulses, Applied Physics B 91 (2008) 21-24.
• [77] A. Bartnik, H. Fiedorowicz, R. Jarocki, J. Kostecki, R. Rakowski, M. Szczurek, EUV emission from solids illuminated with a laser-plasma EUV source, Applied Physics B 93 (2008) 737-741.
• [78] A. Bartnik, H. Fiedorowicz, R. Jarocki, J. Kostecki, M. Szczurek, PMMA and FEP surface modifications induced with EUV pulses in two selected wavelength ranges, Applied Physics A 98 (2010) 61-65.
• [79] A. Bartnik, H. Fiedorowicz, R. Jarocki, J. Kostecki, A. Szczurek, M. Szczurek, Ablation and surface modifications of PMMA using a laser-plasma EUV source, Applied Physics B 96 (2009) 727-730.
• [80] D.-C. Perng, K.-C. Hsu, S.-W. Tsai, J.-B. Yeh, Thermal and electrical properties of PVD Ru(P) films as Cu diffusion barrier, Microelectronic Engineering 87 (2010) 365-369.
• [81] G. Tian, X. Bi, Study on the Si penetration into Fe sheets using PVD method and its application in the fabrication of Fe-6.5 wt.% Si alloys, Surface and Coatings Technology 204 (2010) 1295-1298.
• [82] J.L. Mo, M.H. Zhu, Sliding tribological behaviors of PVD CrN and AlCrN coatings against Si3N4 ceramic and pure titanium, Wear 267 (2009) 874-881.
• [83] Y.H. Cheng, T. Browne, B. Heckermann, E.I. Meletis, Mechanical and tribological properties of nanocomposite TiSiN coatings, Surface and Coatings Technology 204 (2010) 2123-2129.
• [84] C. Martini, L. Ceschnini, A comparative study of the tribological behaviour of PVD coatings on the Ti-6Al-4V alloy, Tribology International 44 (2011) 297-308.
• [85] R.A. Antunes, A.C.D. Rodas, N.B. Lima, O.Z. Higa, I. Costa, Study of the corrosion resistance and in vitro biocompatibility of PVD TiCN-coated AISI 316L austenitic stainless steel for orthopedic applications, Surface and Coatings Technology 205 (2011) 2074-2081.
• [86] M.Y.P. Costa, M.O.H. Ciofii, H.J.C. Voorwald, V.A. Guimaraes, An investigation on slidding wear behavior of PVD coatings, Tribology International 43 (2010) 2196-2202.
• [87] S. Veprek, M.G.J. Veprek-Heijman, The formation and role of interfaces in superhard nc-MenN/a-Si3N4 nanocomposites, Surface and Coatings Technology 201 (2007) 6064-6070.
• [88] S. Veprek, A. Niederhofer, K. Moto, T. Bolom, H.D. Mannling, P. Nesladek, G. Dollinger, A. Bergmaier, Composition, nanostructured and origin of the ultrahardness in nc-TiN/a- Si3N4/a- and nc-TiSi2 nanocomposites with Hv=80 to > 105 GPa, Surface and Coatings Technology 133-134 (2000) 152- 159.
• [89] C.W. Zou, H.J. Wang, M. Li, Y.F. Yu, C.S. Liu, L.P. Guo, D.J. Fu, Characterization and properties of TiN-containing amorphous Ti-Si-N nanocomposite coatings prepared by arc assisted middle frequency magnetron sputtering, Vacuum 84 (2010) 817-822.
• [90] M. Audronis, A. Leyland, P.J. Kelly, A. Mathews, Composition and structure-property relationships of chromium - diboride/molybdenum - disulphide PVD nanocomposite hard coatings deposited by pulsed magnetron sputtering, Applied Physics A 91 (2008) 77-86.
• [91] K. Lukaszkowicz, J. Sondor, A. Kriz, M. Pancielejko, Structure, mechanical properties and corrosion resistance of nanocomposite coatings deposited by PVD technology onto the X6CrNiMoTi17-12-2 and X40CrMoV5-1 steel substrates, Journal of Materials Science 45 (2010) 1629- 1637.
• [92] F. Vaz, L. Rebouta, P. Goudeau, J. Pacaud, H. Garem, J.P. Riviere, A. Cavaleiro, E. Alves, Characterisation of Ti1-xSixNy nanocomposite films, Surface and Coatings Technology 133-134 (2000) 307-313.
• [93] A.A. Voevodin, J.S. Zabinski, Nanocomposite and nanostructured tribological materials for space applications, Composites Science and Technology 65 (2005) 741-748.
• [94] S. Veprek, M.J.G. Veprek-Heijman, Industrial applications of superhard nanocomposite coatings, Surface and Coatings Technology 202 (2008) 5063-5073.
• [95] Y.C. Cheng, T. Browne, B. Heckerman, E.I. Meletis, Mechanical and tribological properties of nanocomposite TiSiN coatings, Surface and Coatings Technology 204 (2010) 2123-2129.
• [96] K. Polychronopoulou, M.A. Baker, C. Rebholz, J. Neidhardt, M.O. Sullivan, A.E. Reiter, K. Kanakis, A. Leyland, A. Matthews, C. Mitterer, The nanostructure, wear and corrosion performance of arc-evaporated CrBxNy nanocomposite coatings, Surface and Coatings Technology 204 (2009) 246-255.
• [97] L. Georghiou, J.C. Harper, M. Keenan, I. Miles, R. Popper (eds.), The Handbook of Technology Foresight. Concepts and Practice, Edward Elgar Publishing Ltd., UK, 2008.
• [98] Strategor, Stratégie, struckture, décision, identié. Poitique générale d’enterprise, Interéditions, Paris, 1991.
• [99] K. Lisiecka, Systems of Product Quality Management. Analysis and Assessment Methods, University of Economics Publishing, Katowice, 2009 (in Polish).
• [100] E. Skrzypek, M. Hofman, Processes Management in an Enterprise. Identification, Measurement, Improvement, Wolters Kluwer Publishing, Warsaw, 2010 (in Polish).
• [101] The Boston Consulting Group, The Product Portfolio, Perspectives 66 (1970).
• [102] FORSURF, Headed by: L.A. Dobrzański, www.forsurf.pl, project in realisation (in Polish).
• [103] A. Dobrzańska-Danikiewicz, Development state analysis of surface engineering technologies, in: 3rd Workshop on foresight of surface properties formation leading technologies of engineering materials and biomaterials, L.A. Dobrzański, A. Dobrzańska-Danikiewicz (eds.), International OCSCO World Press, Gliwice, 2010 (in Polish).
• [104] A. Dobrzańska-Danikiewicz, Goals and methodology of the FORSURF project entitled Foresight of surface properties formation leading technologies of engineering materials and biomaterials, in: 2nd Workshop on foresight of surface properties formation leading technologies of engineering materials and biomaterials, L.A. Dobrzański (ed.), International OCSCO World Press, Gliwice, 2009 (in Polish).
• [105] L.A. Dobrzański, A. Dobrzańska-Danikiewicz, M. Kraszewska, A. Jagiełło, IT methods in goals and tasks of the FORSURF project entitled Foresight of surface properties formation leading technologies of engineering materials and biomaterials, in: 2nd Workshop on foresight of surface properties formation leading technologies of engineering materials and biomaterials, L.A. Dobrzański (ed.), International OCSCO World Press, Gliwice, 2009 (in Polish).
• [106] A. Dobrzańska-Danikiewicz, Main assumptions of the foresight of surface engineering of engineering materials and biomaterials, in: 1st Workshop on foresight of surface properties formation leading technologies of engineering materials and biomaterials, L.A. Dobrzański (ed.), International OCSCO World Press, Gliwice, 2009.
• [107] A.D. Dobrzańska-Danikiewicz, T. Tański, S. Malara, J. Domagała-Dubiel, Assessment of strategic development perspectives of laser treatment of casting magnesium alloys, Archives of Materials Science Engineering 45/1 (2010) 5-39.