Torsional fatigue behaviour and damage mechanisms in the very high cycle regime

• Autorzy: Bayraktar E. , Xue H. , Ayari F. , Bathias C.
• Języki publikacji: EN

Abstrakty

EN

Purpose: of this paper: Many engineering components operate under combined torsion and axial cyclic loading conditions, which can result in fatigue fracture after a very long life regime of fatigue. This fatigue regime were carried out beyond 109 loading cycles called very high cycle fatigue (VHCF) to understand the fatigue properties and damage mechanisms of materials. Design/methodology/approach: Torsional fatigue tests were conducted using a 20 kHz frequency ultrasonic fatigue testing device. The results obtained were compared to those of the conventional torsional fatigue test machine operated at 35 Hz to observe any discrepancy in results due to frequency effects between two experiments. Findings: All the fatigue tests were done up to 1010 cycles at room temperature. Damage mechanisms in torsional fatigues such as crack initiation and propagation in different modes were studied by imaging the samples in a Scanning Electron Microscope (SEM). The results of the two kinds of material show that the stress vs. number of cycle curves (S-N curves) display a considerable decrease in fatigue strength beyond 107 cycles. Research limitations/implications: Each test, the strain of specimen in the gage length must be calibrated with a strain gage bonded to the gage section. This is a critical point of this study. The results are very sensitive to the calibration system. Control of the displacement and the output of the power supply are made continuously by computer and recorded the magnitude of the strain in the specimen.

Słowa kluczowe

EN

damage mechanisms; ultrasonic fatigue; cyclic torsion; very high cycle regime; VHCF; SEM

PL

mechanizm uszkodzenia; zmęczenie; skręcanie cykliczne; VHCF; SEM; skaningowy mikroskop elektronowy

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2010
• Tom: Vol. 43, nr 2
• Strony: 77--86
• Opis fizyczny: Bibliogr. 38 poz.

Twórcy

autor

Bayraktar E.

autor

Xue H.

autor

Ayari F.

autor

Bathias C.

• Supmeca/LISMMA-Paris, School of Mechanical and Manufacturing Engineering, France,

Bibliografia

• [1] S. Nishijiama, K. Kanazawa, Stepwise S-N curve and fish-eye failure in gigacycle regime, Fatigue and Fracture of Engineering Materials and Structures 22 (1999) 601-607.
• [2] Y. Murakami, Y. Takada, T. Toriyama, Super-long life tension-compression fatigue properties of quenched and tempered 0.46%C steel, International Journal of Forecasting 16 (1998) 661-667.
• [3] C. Bathias, There is no infinite fatigue life in metallic materials, Fatigue and Fracture of Engineering Materials and Structures 22 (1999) 559-565.
• [4] H.Q. Xue, E. Bayraktar, C. Bathias, Fatigue behaviour and energy dissipation of a nodular cast iron in ultrasonic fatigue loading, Journal of Achievements in Materials and Manufacturing Engineering 18/2 (2006) 251-254.
• [5] T. Sakai, H. Hirano, T. Tomoto, A study on ultra long life fatigue characteristics in rotating bending for aluminium alloy with some surface treatments, Proceedings of the 3rd International Conference “Very High Cycle. Fatigue” VHCF-3, Kyoto, 2004, 585-592.
• [6] S.E. Stanzl-Tschegg, H.R. Mayer, E.K. Tschegg, The influence of air humidity on near-threshold fatigue crack growth of 2024-T3 Al alloy, Materials Science and Engineering: A 147 (1991) 45-54.
• [7] E. Bayraktar, H. Xue, C. Bathias, Damage mechanisms of Ti-Al inter-metallic in three point ultrasonic bending fatigue, Journal of Achievements in Materials and Manufacturing Engineering 24/1 (2007) 153-161.
• [8] H. Mayer, M. Papakyriacou, B. Zettl, S.E. Stanzl-Tschegg, Influence of porosity on the fatigue limit of die cast magnesium and aluminium alloys, International Journal of Forecasting 25 (2003) 45-256.
• [9] J.R. Morrissey, T. Nicholas, Fatigue strength of Ti-6Al-4V at very long lives, International Journal of Forecasting 27 (2005) 1608-1612.
• [10] E. Bayraktar, M.G. Israel, C.O. Bathias, Failure mechanisms of automotive metallic alloys in very high cycle fatigue range International Journal of Forecasting 28 (2006) 1590-1602.
• [11] J. Sieniawski and M. Motyka, Superplasticity in titanium alloys, Journal of Achievements in Materials and Manufacturing Engineering 24/1 (2007) 123-130
• [12] M.J. Tan, X.J. Zhu, Dynamic recrystallisation in commercially pure titanium, Journal of Achievements in Materials and Manufacturing Engineering 18/2 (2006) 183-186.
• [13] H. Xue, Explanation on gigacycle fatigue of materials in tension, bending and torsion loading, PhD thesis, CNAM, Paris-FRANCE, 2005.
• [14] P. Davoli, A. Bernasconi, M. Filippini, Independence of the torsional fatigue limit upon a mean shear stress, International Journal of Forecasting 25 (2003) 471-480.
• [15] D. Mcclaflin, A. Fatemi, Torsional deformation and fatigue hardened steel including mean stress and stress gradient effects, International Journal of Forecasting􀀃 26 (2004) 773-784.
• [16] L.A. Dobrzański, E. Jonda, A. Polok, A. Klimpel, Comparison of the thermal fatigue surface layers of the X40CrMoV5-1 hot work tool steels laser alloyed, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 135-138.
• [17] H. Mughrabi, On the life-controlling microstructural fatigue mechanisms in ductile metals and alloys in the gigacycle regime, Fatigue and Fracture of Engineering Materials and Structures 22 (1999) 633-641.
• [18] W. Pilarczyk, R. Nowosielski, M. Nowak, M. Kciuk, The structural changes of Al-Ti-Fe alloy during mechanical alloying process, Journal of Achievements in Mater
• [19] H. Mughrabi, Specific features and mechanisms of fatigue in the ultrahigh cycle regime, Proceedings of the 3rd International Conference “Very High Cycle Fatigue”, Japan, Kyoto, 2004, 14-23.
• [20] D. Socie, J. Bannantine, Bulk deformation fatigue damage models, Materials Science and Engineering A 103 (1988) 3-13.
• [21] G. Marquis, D. Socie, Long-life torsion fatigue with normal mean stresses, Fatigue and Fracture of Engineering Materials and Structures 23 (2000) 293-300.
• [22] L. Susmel, D. Taylor, A simplified approach to apply the theory of critical distances to notched components under torsional fatigue loading, International Journal of Forecasting 28 (2006) 417-430.
• [23] C. Makabe, D. Socie, Crack growth mechanisms in precraked torsional fatigue specimens, Fatigue and Fracture of Engineering Materials and Structures 24 (2001) 607-615.
• [24] H. Mayer, C. Ede, J.E. Allison, Influence of cyclic loads below endurance limit or threshold stress intensity on fatigue damage in cast aluminium alloy 319-T7, International Journal of Forecasting 27 (2005) 129-141.
• [25] Q.Y. Wang, J.Y. Berand, C. Bathias, Gigacycle fatigue of ferrous alloys, Fatigue and Fracture of Engineering Materials and Structures 22/8 (1999) 667-672.
• [26] C. Bathias, How and why the fatigue S-N curve does not approach a horizontal asymptote, International Journal of Forecasting 23/1 (2001) 143-151.
• [27] H. Mayer, Ultrasonic torsion and tension - compression fatigue testing: Measuring principles and investigations on 2024-T351 aluminium alloy, International Journal of Forecasting 28 (2006) 1446-1455.
• [28] M. Rojek, J. Stabik, S. Sokół, Fatigue and ultrasonic testing of e-g composites, Journal of Achievements in Materials and Manufacturing Engineering 20/1-2 (2007) 183-186.
• [29] G. Chai, Fatigue behaviour of duplex phase alloys in the very high cycle regime, Proceedings of the 3rd International Conference “Very High Cycle Fatigue”, Japan, Kyoto, 2004, 374-381.
• [30] N. Takashi, O. Hiroyuki, Characteristics of initial fatigue crack propagation process of Ti-6Al-4V in very high cycle fatigue, Proceedings of the 3rd International Conference “Very High Cycle Fatigue”, Japan, Kyoto, 2004, 201-208.
• [31] M. Papakyriacou, H. Mayer, C. Pypen, H. Plenk, S. Stanzl-Tschegg, Effects of surface treatments on high cycle corrosion fatigue of metallic implant materials, International Journal of Forecasting 22 (200) 873-886.
• [32] P. Lukas, L. Kunz, Specific features of high-cycle and ultra-high-cycle fatigue, Fatigue and Fracture of Engineering Materials and Structures 25 (2002) 747-53.
• [33] H. Mayer, M. Papakyriacou, B. Zettl, Endurance limit and threshold stress intensity of die cast magnesium and aluminium alloys at elevated temperatures, International Journal of Forecasting 27 (2005) 1076-1088.
• [34] H.Q. Xue, E. Bayraktar, I. Marines-Garcia, C. Bathias, Torsional fatigue behaviour in gigacycle regime and damage mechanism of the perlitic steel, Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 391-397.
• [35] Y. Murakami, H. Matsunaga, The effect of hydrogen on fatigue properties of steels used for fuel cell system, International Journal of Forecasting 28 (2006) 1509-1520.
• [36] E. Bayraktar, R. Mora, I-M. Garcia, C. Bathias, Heat treatment, surface roughness and corrosion effects on the damage mechanism of mechanical components in the very high cycle fatigue regime, International Journal of Fatigue 1/10 (2009) 1532-1540.
• [37] H. Xue, D. Wagner, N. Ranc, E. Bayraktar, Thermographic analysis in ultrasonic fatigue tests, Fatigue and Fracture of Engineering Materials and Structures 29 (2006) 573-580.
• [38] D. Renowicz, S.J. Skrzypek, Crack initiation and propagation in Fe-Al matrix, Journal of Achievements in Materials and Manufacturing Engineering 22/1 (2007) 37-40.