Properties of sandwich metals joined by explosive cladding method

• Autorzy: Čížek L. , Ostroushko D. , Szulc Z. , Molak R. , Praźmowski M.
• Języki publikacji: EN

Abstrakty

EN

Purpose: Paper presents results of investigations with two layers explosively formed sandwich composite consisting of different composition joint which requires very often knowledge of structure and mechanical properties. These properties are connected with microstructure that is influenced by technological factors under cladding. Design/methodology/approach: The sample bars were prepared from explosively formed sandwich composite near the join area. The methods of the light microscopy and the hardness and tensile test for evaluation of quality of joined sandwich metals were used. Investigations by a new fatigue method in the case sandwich composite steel CrNi(18/10) + Ti were completed. Findings: Measurement of micro-hardness in the zone of the joint a deformation of materials shows an increase value of that. Detailed metallographic observation detected in proximity of the joints an occurrence of structural non-homogeneities. Steel and titanium interface surfaces are corrugated. New fatigue method in the case sandwich composite steel CrNi(18/10) + Ti were verified. Research limitations/implications: Knowledge of microstructure characteristics will be extended by the method of SEM, including micro-analysis of individual structural components and surface analysis. Influence of experiment conditions on results of fatigue test must be more elaborated in future. Practical implications: The results may be utilized for a relation between structure and properties of the investigated materials in process of manufacturing. Originality/value: These results contribute to complex evaluation of properties explosively formed sandwich composite namely for explanation of structure developed new sandwich composites. The results of this paper are determined for research workers deal by development new exploitations of new sandwich composites.

Słowa kluczowe

EN

materials; metallic alloys; sandwich materials; explosive cladding method; mechanical properties; structure

PL

materiał; stopy metaliczne; materiały wielowarstwowe; zgrzewanie wybuchowe; właściwości mechaniczne; struktura

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2010
• Tom: Vol. 43, nr 1
• Strony: 21--29
• Opis fizyczny: Bibliogr. 19 poz.

Twórcy

autor

Čížek L.

autor

Ostroushko D.

autor

Szulc Z.

autor

Molak R.

autor

Praźmowski M.

• VŠB-Technical University of Ostrava, 17.listopadu 15, 708 33 Ostrava, Czech Republic,

Bibliografia

• [1] J. Okrajni, Thermo-mechanical fatigue condition of power plant components, Journal of Achievements in Materials and Manufacturing Engineering 33/1 (2009) 61-69.
• [2] L.A. Dobrzański, A. Zieliński, M. Sroka: Structure, properties and method of state evaluation of low-alloyed steel T23 (HCM2S) worked in creep conditions, 11th Scientific International Conference “Contemporary Achievements in Mechanics, Manufacturing and Materials Science” CAM3S´2005, Gliwice - Zakopane, 2005, (CD-ROM).
• [3] W. Ozgowicz, A. Kurc, The effect of the cold rolling on the structure and mechanical properties in austenitic stainless steels type 18-8, Archives of Materials Science and Engineering 38/1 (2009) 27-33.
• [4] W. Ozgowicz, E. Kalinowska-Ozgowicz, A. Kurc, Influence of plastic deformation on the structure and mechanical properties of stainless steels type X5Cr-Ni18-10, Journal of Achievements in Materials and Manufacturing Engineering 32/1 (2008) 37-40.
• [5] W. Ozgowicz, A. Kurc, Structure and properties of forming austenitic X5Cr-Ni18-10 stainless steel in a cold working, Journal of Achievements in Materials and Manufacturing Engineering 33/1 (2009) 19-26.
• [6] M. Turňa, Specials methods of welding (in Slovak-Špeciálne metódy zvárania), ALFA Bratislava 1989.
• [7] T.Z Blazyński, Explosive welding, forming and compaction. England, Applied Science Publisher Ltd., 1983.
• [8] G.E. Linnert, Welding Metalurgy - Carbon and Alloy Steels. AWS, Miami, Florida, 1994.
• [9] R.A. Patterson: Explosive bonding, welding: theory and practice;1990, Amsterdam, Elsevier.
• [10] Metals hand book’, 9th edn, 6, Welding, brazing and soldering, 705-718; 1983, Metals Park, OH, ASM.
• [11] T.A. Palmer, J.W. Elmer, D. Brasher, D. Butler and R.Riddle: Welding International 85 (2006) 252-263.
• [12] V.N. Gul’bin, A.G. Kobelev: Welding International 13 (1999) 306-309.
• [13] A. Nobili, Stainless Steel World 10 (1998) 33-37.
• [14] K.E. Thelning, Steel and its heat treatment, Second Edition, Butterworths, London, 1984, 25-26.
• [15] B. Crossland, A.S. Bahrani: Source book on innovative welding processes, Metals Park, OH, ASM, 1981, 99-115.
• [16] A. Akhtar, A.S. Rao, D. Kung, R.D. Sisson, Jr.(ed.), Coatings and Bimetallics for Aggressive Environments, American Society for Metals, Metals Park, OH, 1985.
• [17] J. Charles, in: Proceedings of the Fourth International Conference Duplex Stainless Steel’94, Glasgow, Scotland 1, 13-16 November 1994, Raper KV.
• [18] L. Čížek, M. Tvrdý, S. Król, Z. Szulc, R. Bański, A. Hernas, Preparation of Sandwich Materials Made by Explosive Cladding, Sb. Konf.” 12 International Conference on Problems of Materials Engineering, Mechanics and Design, 5-6.9. Púchov, 2007, CD, 6s, University Review 2/1 (2008) 29-33.
• [19] L. Čížek, D. Ostroushko, Z. Szulc, R. Bański, Structure and properties of sandwich materials after explosive cladding, Sb.vĕdeckých prací Vysoké školy báňské-TU Ostrava, LII 3 (2009) 15-21