The investigations of hot-deformability and structure of high-temperature Fe-Ni alloy

• Autorzy: Ducki K. , Kuc D.
• Języki publikacji: EN

Abstrakty

EN

Purpose: This study describes the influence of initial austenite grain size and parameters of hot plastic deformation on the deformability and structure of high-temperature Fe-Ni austenitic alloy of A-286 type. Design/methodology/approach: The hot deformation characteristics of the alloy were investigated by hot torsion tests using torsion plastometer. The tests were executed at constant strain rates of 0.1 and 1.0 s-1, at a testing temperature in the range from 900 to 1150 °C. The structural inspections were performed on microsections taken from plastometric samples after so called "freezing". Findings: Plastic properties of the alloy were characterized by the worked out flow curves and the temperature relationships of flow stress and the strain limit. The relationship between the peak stress (σpp) and the Zoner-Hollomon parameter (Z) were described by power function. Activation energy for hot working (Q) was assessed for the alloy after two variants of previous heating. The examinations performed, focusing on the influence of hot working parameters on the structure of austenitic alloy, revealed subsequently occurring processes of dynamic recovery, recrystallization and repolygonization. Practical implications: Characteristics of the alloy plastic properties during hot deformation depend considerably on the initial soaking temperature and hot deformation parameters. Optimum values of yield stress and strain limit were obtained for the alloy after its initial soaking at 1100 °C/2h and strain rate of 0.1 s-¹ in the temperature range of 1050-950 °C. Originality/value: An increase of the alloy deformation temperature led to a growth of the size of subgrains with a simultaneous decrease of their internal dislocation density. The influence of the strain rate of the alloy on the size of subgrains and dislocation density is complex by nature and depends on the initial size of the austenite grains and on the mechanism of the dynamic recrystallization process.

Słowa kluczowe

EN

metallic alloys; hot deformation; recrystallization; TEM

PL

stopy metaliczne; odkształcanie na gorąco; rekrystalizacja; TEM

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2009
• Tom: Vol. 35, nr 2
• Strony: 83--90
• Opis fizyczny: Bibliogr. 16 poz.

Twórcy

autor

Ducki K.

autor

Kuc D.

• Materials Science Department, Silesian University of Technology, ul. Krasińskiego 8, 40-019 Katowice, Poland,

Bibliografia

• [1] K.J. Ducki, M. Hetmańczyk, D. Kuc, The deformability and substructure of hot-deformed high-temperature Fe-Ni austenitic alloy, Proceedings of the 11th International Scientific Conference on the "Contemporary Achievements in Mechanics, Manufacturing and Materials Science" CAM3S, Gliwice-Zakopane, 2005, (CD-ROM).
• [2] K.J. Ducki, Precipitation and growth of intermetallic phase in a high-temperature Fe-Ni alloy, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 87-90.
• [3] H. Gao, G.C. Barber, Q.A. Chen, High temperature deformation of a Fe-based law nickel alloy, Journal of Materials Processing Technology 142 (2003) 52-57.
• [4] E. Hadasik, Methodology for determination of the technological plasticity characteristics by hot torsion test, Archives of Metallurgy and Materials 50 (2005) 729-746.
• [5] H.S. Jeong, J.R. Cho, H.C. Park, Microstructure prediction of Nimonic 80A for large exhaust valve during hot closed dieforging, Journal of Materials Processing Technology 162-163 (2005) 504-511.
• [6] H.J. Klaar, P. Schwaab, Ö. Werner, Round Robin investigation into the quantitative measurement od dislocation density in the electron microscope, Praktische Metallographie 29 (1992) 3-26.
• [7] M. Kohno, T. Yamada, A. Susuki, S. Ohta, Heavy Disk of Heat Resistant Alloy for Gas Turbine, Proceedings of Internationale Schmiedetagung, Düsseldorf, 1981.
• [8] M. Konter, M. Thumann, Materials and manufacturing of advanced industrial gas turbine components, Journal of Materials Processing Technology 117 (2001) 386-390.
• [9] U. Martin, U. Mühle, H. Oettel, The quantitative measurement of dislocation density in the transmission electron microscope, Praktische Metallographie 32 (1995) 467-477.
• [10] H.J. McQueen, S. Yue, N.D. Ryan, E. Fry, Hot working characteristics of steels in austenitic state, Journal of Materials Processing Technology 53 (1995) 293-310.
• [11] N.K. Park, I.S. Kim, Y.S. Na, J.T. Yeom, Hot forging of a nickel-base superalloy, Journal of Materials Processing Technology 111 (2001) 98-102.
• [12] I. Schindler, J. Boruta, Utilization potentialities of the torsion plastometer, department of metal forming, Silesian University of Technology, Katowice 1998.
• [13] C.M. Sellars, Role of computer modelling in thermomechanical processing, Materials Engineering (1998) 100-107.
• [14] J.M. Zhang, Z.Y. Gao, J.Y. Zhuang, Z.Y. Zhong, Grain growth model of IN718 during holding period after hot deformation, Journal of Materials Processing Technology 101 (2000) 25-30.
• [15] L.X. Zhou, T.N. Baker, Effects of strain rate and temperature on deformation behaviour of IN 718 during high temperature deformation, Materials Science and Engineering A177 (1994) 1-9.
• [16] M. Zhang, Z.Y. Gao, Z.Y. Zhuang, Z.Y. Zhong, Modeling of grain size in superalloy IN718 during hot deformation, Journal of Materials Processing Technology 88 (1999) 244-250.