Powiadomienia systemowe
- Sesja wygasła!
Tytuł artykułu
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Purpose: Investigation the influence of kind of PVD coatings structure (homogenous or gradient) on properties of deposited tool materials: cemented carbides and cermets. Design/methodology/approach: Analysis of the structure, analysis of the mechanical and functional properties: surface roughness, microhardness tests, scratch tests, cutting tests. The Ti(C,N) gradient coating was investigated by XPS method with multifunctional PHI 5700/660 spectrometer. The characteristic of surface region coating were determined from XPS depth profile. X-ray qualitative phase analysis and the grazing incidence X-ray diffraction method (GIXRD) was employed to collect the detailed information about phase composition of investigated material’s surface layer. Microstructural of investigations substrates and coatings by transmission electron miocroscopy (TEM) were done. Findings: Results of the investigation the influence of PVD coatings structure (homogenous or gradient) and kind on properties of coated tool materials: cemented carbides and cermets are given in the paper. Coatings are characterized by dense, compact structure, there have been identified no pores, fractures and discontinuities. The coatings were deposited uniformly onto the investigated substrate materials and show a characteristic columnar, fine-graded structure. The results of roughness, microhardness and cutting tests confirm the advantages of the PVD coatings. The coatings deposited onto the investigated substrates are characterised by good adhesion and causes increasing of wear resistance. The grazing incidence X-ray diffraction method (GIXRD) in the investigated coatings were used to describe the structure and gradient character of the coatings. Practical implications: Deposition of hard, thin, gradient coatings on materials surface by PVD method features one of the most intensely developed directions of improvement of the working properties of materials. Originality/value: New techniques of gradient coatings deposition is one of the most spectacular aspect of the materials engineering development in the last years. The grazing incidence X-ray diffraction method (GIXRD) in the investigated coatings were used to describe the gradient character of the coatings.
Wydawca
Rocznik
Tom
Strony
93--103
Opis fizyczny
Bibliogr. 18 poz.
Twórcy
autor
autor
autor
autor
autor
- Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland, leszek.dobrzanski@polsl.pl
Bibliografia
- [1] L.A. Dobrzański, S. Skrzypek, D. Pakuła, J. Mikuła, A. Kniž, Influence of the PVD and CVD technologies on the residual macro-stresses and functional properties of the coated tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering 35/2 (2009) 162-168.
- [2] L.A. Dobrzański, L.W. Żukowska, J. Mikuła, K. Gołombek, P. Podstawski, Functional properties of the sintered tool materials with (Ti,Al)N coating, Journal of Achievements in Materials and Manufacturing Engineering 36/2 (2009) 134-141.
- [3] L.A. Dobrzański, L.W. Wosińska, J. Mikuła, K. Gołombek, Multicomponent and gradient PVD coatings deposited on the sintered tool materials, Material Engineering 3-4 (157- 158) (2007) 627-630.
- [4] L.A. Dobrzański, L. Wosińska, K. Gołombek, J. Mikuła, Structure of multicomponent and gradient PVD coatings deposited on sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 99-102.
- [5] L.A. Dobrzański, L.W. Wosińska, J. Mikuła, K. Gołombek, D. Pakuła, M. Pancielejko, Structure and mechanical properties of gradient PVD coatings, Journal of Materials Processing Technology 201(2008) 310-314.
- [6] L.A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła, Improvement of tool materials by deposition of gradient and multilayers coatings, Journal of Achievements in Materials and Manufacturing Engineering 19 (2006) 86-91.
- [7] M. Cłapa, D. Batory, Improving adhesion and wear resistance of carbon coatings using Ti:C gradient layers, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 415-418.
- [8] L.A. Dobrzański, Engineering materials and materials design. Fundamentals of materials science and physical metallurgy, WNT, Warsaw-Gliwice, 2006 (in Polish).
- [9] Li Chen, S.Q. Wang, S.Z. Zhou, Jia Li, Y.Z. Zhang, Microstructure and mechanical properties of Ti(C,N) and TiN/Ti(C,N) multilayer PVD coatings, International Journal of Refractory Metals & Hard Materials 26 (2008) 456-460.
- [10] M. Antonov, I. Hussainova, F. Sergejev, P. Kulu, A. Gregor, Assessment of gradient and nanogradient PVD coatings behaviour under erosive, abrasive and impact wear conditions, Wear 267 (2009) 898-906.
- [11] Li Chen, S.Q. Wang, Yong Du, Jia Li, Microstructure and mechanical properties of gradient Ti(C, N) and TiN/Ti(C,N) multilayer PVD coatings, Materials Science and Engineering A 478 (2008) 336-339.
- [12] W. Lengauer, K. Dreyer, Functionally graded hardmetals, Journal of Alloys and Compounds 338 (2002) 194-212.
- [13] T. Liu, C. Dong, S. Wu, K. Tang, J. Wang, J. Jia, TiN, TiN gradient and Ti/TiN multi-layer protective coatings on Uranium, Surface and Coating Technology 201 (2007) 6737-6741.
- [14] R. Manaila, A. Devenyi, D. Biro, L. David, P.B. Barna, A. Kovacs, Multilayer TiAlN coatings with composition gradient, Surface and Coatings Technology 151-152 (2002) 21-25.
- [15] P. Panjan, I. Boncina, J. Bevk, M. Cekada, PVD hard coatings applied for wear protection of drawing dies, Surface and Coating Technology 200 (2005) 133-136.
- [16] X. Qiao, Y. Hou, Y. Wu, J. Chen, Study on functionally gradient coatings of Ti-Al-N, Surface and Coating Technology 131 (2000) 462-464.
- [17] J. Chastain, RC King, Jr, Handbook of X-ray Photoelectron Spectroscopy, Physical Electronics, Inc.1995.
- [18] A. Śliwa, J. Mikuła, K. Gołombek, L.A. Dobrzański, FEM modelling of internal stresses in PVD coated FGM, Journal of Achievements in Materials and Manufacturing Engineering 36/1 (2009) 71-78.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSL7-0048-0022