Modelling of machine drive vibration by the decomposition method

• Autorzy: Zeman V. , Hlavac Z.
• Konferencja: IV Międzynarodowe Seminarium Mechaniki Stosowanej (14-16.04.2000 ; Wisła, Polska)
• Języki publikacji: EN

Abstrakty

EN

The contribution is devoted to modelling vibration of the machine drives with gears. Modelling is based on the system decomposition into subsystems joined by discrete internal couplings - gear meshings and claw couplings. The shafts, mounted on the rolling element bearings, are modelled as id continuums. Each bearing is modelled by two radial and one axial springs and parallel viscous dampers. The rigid discs (gears) are fixed fast to shaft or are joined with shafts by means of torsional stiffness of splined connections. The method is illustrated by the modelling of the mill drive.

Słowa kluczowe

EN

bearing; vibration; modeling

PL

łożysko; drgania; modelowanie

• Wydawca: Wydawnictwo Katedry Mechaniki Stosowanej
• Czasopismo: Zeszyty Naukowe Katedry Mechaniki Stosowanej / Politechnika Śląska
• Rocznik: 2000
• Tom: z. 12
• Strony: 97--100
• Opis fizyczny: Bibliogr. 3 poz.

Twórcy

autor

Zeman V.

autor

Hlavac Z.

• Department of Mechanics, University of West Bohemia