Evaluation of tensile properties of 5052 type aluminum-magnesium alloy at warm temperatures

• Autorzy: Ozturk F. , Toros S. , Kilic S.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The purpose of the paper is to evaluate the tensile properties of 5052 type aluminum-manganese alloy in warm temperatures. Design/methodology/approach: In this research, uniaxial tensile deformation behavior of 5052-H32 type aluminum magnesium alloy was studied range between room to 300°C and in the strain rate range of 0.0083-0.16 s-1. Findings: It was observed that the uniaxial tensile elongation of the material increases with increasing temperatures and decreases with increasing strain rates. The formability of this material at warm temperatures is better than the room temperature and the most suitable forming conditions were obtained at 300°C and 0.0083 s-1. Practical implications: Results indicate that strain rate sensitivity plays an important role in the formability of this material at warm temperatures. Originality/value: The evaluation of the tensile properties of 5052 type aluminum-manganese alloy in warm temperatures.

Słowa kluczowe

EN

mechanical properties; aluminum-magnesium alloys; Al-Mg; 5XXX; 5052

PL

właściwości mechaniczne; stop aluminiowo-magnezowy; Al-Mg; 5XXX; 5052

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2008
• Tom: Vol. 34, nr 2
• Strony: 95--98
• Opis fizyczny: Bibliogr. 9 poz.

Twórcy

autor

Ozturk F.

autor

Toros S.

autor

Kilic S.

• Department of Mechanical Engineering, Nigde University, 51245 Nigde, Turkey,

Bibliografia

• [1] N. Abedrabbo, F. Pourboghrat, J. Carsley, Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models, International Journal of Plasticity 23 (2007) 841-875.
• [2] T. Altan, Warm forming of aluminum alloys academic exercise or practical opportunity, Stamping Journal 14 (2002) 58-59.
• [3] P.J. Bolt, N.A.P.M. Lamboo, J.F.C. van Leeuwen, R.J. Werkhoven, Warm drawing of aluminum components, Proceedings of the 7th Saxon Conference on Forming Technology, Lightweight Construction by Forming Technology, Chemnitz, 2000, 101-118.
• [4] D. Carle, G. Blount, The suitability of aluminum as an alternative material for car bodies, Mater Design 20 (1999) 267-272.
• [5] I.N. Fridlyander, V.G. Sister, O.E. Grushko, V.V. Berstenev, L.M. Sheveleva, L.A. Ivanova, Aluminum alloys: Promising materials in the automotive industry, Metal Science and Heat Treatment 44 (2002) 365-370.
• [6] D. Li, A. Ghosh, Tensile deformation behavior of aluminum alloys at warm forming temperatures, Materials Science and Engineering A 352 (2003) 279-286.
• [7] Z. Marciniak, L.J. Duncan, J.S. Hu, Mechanics of sheet metal forming, Butterworth-Heinemann, Oxford, 2002, 66.
• [8] W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, A. Vieregge, Recent development in aluminum alloys for the automotive industry, Materials Science and Engineering A 280 (2000) 37-49.
• [9] T. Naka, F. Yoshida, Deep drawability of type 5083 aluminum-magnesium alloy sheet under various conditions of temperature and forming speed, Journal of Materials Processing Technology 89\90 (1999) 19-23.