Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Konferencja
Modelling and optimization of physical systems/International Seminar of Applied Mechanics (9 ; 27.05-29.05.2005 ; Wisła, Polska)
Języki publikacji
Abstrakty
In the presented paper are mentioned experiences with 3D discretisation of non-standard gearing type HCR (High Contact Ratio). Exploited results were obtained by mapped 3D mesh compare to free mesh. For continuous teeth modification was found out increasing of contact pressure.
Rocznik
Tom
Strony
47--52
Opis fizyczny
Bibliogr. 4 poz.
Twórcy
autor
- Department of Mechanics, Faculty of Mechanical Engineering, VSB – Technical University of Ostrava
autor
- Department of Mechanics, Faculty of Mechanical Engineering, VSB – Technical University of Ostrava
Bibliografia
- [1] Horyl P.: Computer modelling of non-standard gearing, In CO-MAT TECH 2002, 10th Int.Scientific Conference, 2002, s. 275-280.
- [2] Horyl P.: Kontakt a nestandardni ozubeni, 10. ANS YS User's Meeting, Sbornik přednášek, 2002, vol. 10, p. I-A-9/1 - 6.
- [3] Horyl P., Hlaváčková M.: Contact and substandard gearing. In Conference Proceedings list CAD-FEM Users'Meeting 2003 "Int. Congress on FEM Technology", Potsdam; CAD-FEM GmbH, 2003. p. 1.1.20.
- [4] Horyl P.: The numerical study of contact pressure for substandard gearing, Sbornik vedeckych praci Vysoke skoly bánske - Technicke univerzity Ostrava, řada strojní', 2002, vol. XLVII, (c. 1), s. 97-105.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSL6-0012-0086