Influence of technological manufacturing defects on teeth contact pressure

• Autorzy: Horyl P. , Hlavackova M.
• Konferencja: Modelling and optimization of physical systems/International Seminar of Applied Mechanics (9 ; 27.05-29.05.2005 ; Wisła, Polska)
• Języki publikacji: EN

Abstrakty

EN

In the presented paper are mentioned experiences with 3D discretisation of non-standard gearing type HCR (High Contact Ratio). Exploited results were obtained by mapped 3D mesh compare to free mesh. For continuous teeth modification was found out increasing of contact pressure.

Słowa kluczowe

EN

HCR gear; modeling; manufacturing defects; contact area; deformation

PL

przekładnia HCR; modelowanie; błędy produkcji; odkształcenia

• Wydawca: Wydawnictwo Katedry Mechaniki Stosowanej
• Czasopismo: Zeszyty Naukowe Katedry Mechaniki Stosowanej / Politechnika Śląska
• Rocznik: 2005
• Tom: z. 28
• Strony: 47--52
• Opis fizyczny: Bibliogr. 4 poz.

Twórcy

autor

Horyl P.

• Department of Mechanics, Faculty of Mechanical Engineering, VSB – Technical University of Ostrava

autor

Hlavackova M.

• Department of Mechanics, Faculty of Mechanical Engineering, VSB – Technical University of Ostrava

Bibliografia

• [1] Horyl P.: Computer modelling of non-standard gearing, In CO-MAT TECH 2002, 10th Int.Scientific Conference, 2002, s. 275-280.
• [2] Horyl P.: Kontakt a nestandardni ozubeni, 10. ANS YS User's Meeting, Sbornik přednášek, 2002, vol. 10, p. I-A-9/1 - 6.
• [3] Horyl P., Hlaváčková M.: Contact and substandard gearing. In Conference Proceedings list CAD-FEM Users'Meeting 2003 "Int. Congress on FEM Technology", Potsdam; CAD-FEM GmbH, 2003. p. 1.1.20.
• [4] Horyl P.: The numerical study of contact pressure for substandard gearing, Sbornik vedeckych praci Vysoke skoly bánske - Technicke univerzity Ostrava, řada strojní', 2002, vol. XLVII, (c. 1), s. 97-105.