Regional report for CPT in East European countries

• Autorzy: Młynarek Z.
• Języki publikacji: EN

Abstrakty

EN

The paper presents information concerning CPT use and application in the assessment of geotechnical parameters, stratigraphy of subsoil and equipment used in countries of Eastern Europe, i.e. Belarus, Bulgaria, The Czech Republic, Estonia, Lithuania, Latvia, Poland, Russia, Romania, Slovakia, Ukraine and Hungary. The application of CPTU to determine mechanical parameters of industrial wastes used in the construction of man-made reservoirs is also discussed. The use of statistical methods to isolate homogenous subsoil layers based on CPTU parameters is also presented in this paper.

PL

Artykuł zawiera informacje odnośnie wykorzystania metody CPT do oceny parametrów geotechnicznych, stratygrafii podłoża gruntowego i stosowanego sprzętu w krajach Europy wschodniej, do których zaliczono Białoruś, Bułgarię, Czechy, Estonię, Litwę, Łotwę, Polskę, Rosję, Rumunię, Słowację, Ukrainę i Węgry. W artykule skomentowano także wykorzystanie metody CPTU do wyznaczania parametrów mechanicznych odpadów przemysłowych, wykorzystanych do budowy składowisk. Wykorzystanie metod statystycznych do wydzielenia jednorodnych warstw podłoża na podstawie parametrów CPTU stanowi również temat niniejszego artykułu.

Słowa kluczowe

EN

CPT method; stratigraphy; ground surface; geology; East Europe; CPTU method

PL

metoda CPT; stratygrafia; podłoże gruntowe; geologia; Europa Wschodnia; metoda CPTU

• Wydawca: Silesian University of Technology
• Czasopismo: Architecture Civil Engineering Environment
• Rocznik: 2011
• Tom: Vol. 4, no. 1
• Strony: 55--76
• Opis fizyczny: Bibliogr. 42 poz.

Twórcy

autor

Młynarek Z.

• Department of Geotechnics, Poznan University of Life Sciences, Poland,

Bibliografia

• [1] Bajda M., Markowska K.; The use of seismic cone penetration tests for estimation of oedometric modulus M in cohesive soils, Politechnika Śląska, Zeszyty Naukowe nr 1574, 2003, p.7-15 (in Polish)
• [2] Bałachowski L.; Proc. of the Second International Conference on the Flat Dilatometer. Washington, D.C., 2006
• [3] Baldi G., Bellotti R., Ghionna V., Jamiolkowski M., Pasqualini E.; Interpretation of CPT’S and CPTU’S, 4th International Geotechnical Seminar, 2nd Part: Drained Penetration. Singapore, 1986, p.143-156
• [4] Bednarik M., Liscak P.; Landslide hazard assessment in Slovakia, Manuscript, 2009
• [5] Furmonavicius L., Dagys A.; Cone Penetration Testing in Lithuania, Proc. of International Symposium on Cone Penetration Testing, Swedish Geotechnical Society, Report 3:95, Vol.1, 1995, p.125-132
• [6] Giżyński T.; Zastosowanie sondowań dynamicznych do oceny nośności niespoistego podłoża gruntowego obciążonego fundamentem bezpośrednim lub na palach, (Application of dynamic sounding for estimation of bearing capacity of non-cohesive subsoil loaded by direct or pile foundation), PhD dissertination, Technical University Gdańsk, 2000 (in Polish)
• [7] Gwizdała K., Stęczniewski M.; Bearing capacity of piles on the basis of CPT results, Proc. of 44th Scientific Conference Krynica’98, Vol.: Geotechnika, 1998 (in Polish)
• [8] Harder H., von Bloh G.; Determination of representative CPT-parameters, Proc. of International Conference: Penetration testing in the UK. Thomas Telford. London, 1988, p.237-240
• [9] Hartigan J.A.; Clustering Algorithms, Wiley, 1975
• [10] Hegazy Y.A., Mayne P.W.; Objective Site Characterization Using Clustering of Piezocone Data, Journal of Geotechnical and Geoenvironmental Eng., Vol.12, 2002
• [11] Imre E.; Some physical problems associated with the skin bearing capacity of piles, Hungarian Academy of Science, Acta Technica 102, (1-2), 1989, p.65-85
• [12] Imre E., Kralik B.; Cone penetration testing In Hungary in the last two decades, Proc. Of International Symposium on Cone Penetration Testing, Swedish Geotechnical Society, Report 3:95, Vol.1, 1995, p.75-83
• [13] Jamiolkowski M., Lo Presti D.C.F., Manassero M.; Evaluation of relative density and shear strength of sands from CPT and DMT. C. C. Ladd Symposium. M.I.T, Cambridge Mass, 2001
• [14] Kaufman L., Rousseeuw P.; Finding Groups in Data: An Introduction to Cluster Analysis, Wiley, 1990
• [15] Kralik B.; Neue Erkenntnisse bei Sondierungen, Proc. 9th Budapest Conference on Soil Mechanics and Foundation Eng., 1984a, p.167-174
• [16] Kralik D.; Determination of being capacity of piles on the basis of sounding PhD thesis, 1984b
• [17] Lech M,. Garbulewski K.; Rozpoznanie właściwości iłów warszawskich metodą elektrooporową (Characteristics of Warsaw clays based on soil electrical resistivity measurements), Proc. of the Conference: Geotechniczne Problemy Posadowień na Gruntach Ekspansywnych. Wydawnictwo Uniwersyteckie UTP, Bydgoszcz, 2009 (in Polish)
• [18] Lunne T., Robertson P.K., Powell J.J.M.; Cone Penetration Testing in Geotechnical Practice, Blackie Academic & Professional, 1997, p.312
• [19] Marchetti D., Marchetti S., Monaco P., Totani G.; Interrelationship between small strain modulus G0 and operative modulus, Proc. of International Symposium Tokyo 2009, Earthquake Geotechnical Engineering, 2009
• [20] Marcu A., Culita C.; State of practice on CPT In Romania, Proc. of International Symposium on Cone Penetration Testing, Swedish Geotechnical Society, Report 3:95, Vol.1, 1995, p.175-182
• [21] Młynarek Z.; Site investigation and mapping in Urban area, Proc. of 14th European Conference on Soil Mechanics and Geotechnical Engineering, Madrid, Millpress, 2007, Vol.1
• [22] Młynarek Z. Waliński M.; Example of application of cone penetration test to shallow foundation design, Inżynieria i Budownictwo nr 6, 2004, p.332-334 (in Polish)
• [23] Młynarek Z., Gogolik S., Marchetti D.; Suitability of the SDMT method to asses geotechnical parameters of mine failings, Proc. of 2nd International Conference on the Flat Dilatometer, Washington DC., 2006, p.148-153
• [24] Młynarek Z., Tchuschke W., Gogolik S.; Concerning determination of deformation modulus of subsoil with the static sounding method and with Marchetti’s dilatometer, Inżynieria Morska i Geotechnika nr 3/4, 2003, p.135-138 (in Polish)
• [25] Młynarek Z., Tschuschke W., Welling E.; Control of strength parameters of tailings used for construction of reservoir dam, Proc. of 5th International Conference on Tailings and Mine Waste, Colorado, Balkema, 1998, p.213-221
• [26] Młynarek Z., Tschuschke W., Lunne T.; Techniques for examining parameters of post flotation sediments accumulated in the pond, Proc. of International Conference Re-use of contaminated sand and landfills, Tech. Press. University of Edinburg, 1994, p.1723
• [27] Młynarek Z., Tschuschke W., Lunne T., Sanglerat G.; Concerning classification of post-flotation sediments with CPTU method, Mecanique des Sols Applique, Colloquium France – Polonaise, Association Universities de Genie Civil, Douai, 1993, p.81-88
• [28] Młynarek Z., Tschuschke W., Welling E.; Conductivity piezocone penetration test for evaluation of soil contamination, Proc. International Symposium on Cone Penetration Testing (CPT-95), Swedish Geotechnical Society, Vol.2, 1995, p.233-377
• [29] Młynarek Z., Tschuschke W., Wierzbicki J.; National Report – Poland, Proc. of International Symposium on Cone Penetration Testing, Swedish Geotechnical Society, Report 3, 1995
• [30] Młynarek Z., Wierzbicki J., Long M.; Factors affecting CPTU and DMT characteristics in organic soils, Proc. of the 11th Baltic Sea Geotechnical Conference on Geotechnics in Maritime Engineering, Printing office MISIURO Gdańsk, 2008, p.407-419
• [31] Młynarek. Z., Sanglerat G., Tomaszewski M.; Evaluation of soil strength parameters by the CPTU method. Archiwum Hydrotechniki. No.3/4, 1991, 17-34
• [32] Norwegian Geotechnical Institute Department of Geotechnics, Agricultural University Poznań, Poland, Report: Quality of CPTU. 2002, Projekt menager: Lunne T.
• [33] Robertson P.K.; Soil classification using the cone penetration test, Canadian Geotechnical Journal 27(1), 1990, p.151-158
• [34] Senneset K., Janbu N., Svano G.; Strength and deformation parameters from cone penetration tests, Proc. International Conference Penetration Testing ESOPT, Amsterdam, Balkema, 1982, p.863-870
• [35] Trofimenkow Y.G., Kulachkin B.I., Mariupolsky I.G., Ryzhkov I.B.; Cone Penetration Testing in Russia, Proc. of International Symposium on Cone Penetration Testing, Swedish Geotechnical Society, Report 3:95. Vol.1, 1995, p.183-192
• [36] Trofimenkow Y.G., Worobkof L.H., Smirnickij A.N., Benediktow A.A.; Polovije metody issledovanija swoistw gruntow (In situ methods of soil exploration), Izdatielstro Architektury po Stroilelstwu, 1964, p.1-144 (in Russian)
• [37] Tschuschke W.; Cone penetration testing in mine tailings, Silesian Technical University. Pub. No.1738, 2007 (in Polish)
• [38] Tschuschke W., Młynarek Z., Welling E.; Interpretation of deep CPTU results, Proc. of International Conference on In-situ Measurement of Soil Properties and Case Histories, Bali Parahyangan Catholic University, Indonesia, 2001
• [39] Tschuschke W., Młynarek Z., Werno M.; Assessment of subsoil variability with the cone penetration test,Proc. of International Conference: Probabilistics Methods in Geotechnical Engineering, Canbera, Balkema, Rotterdam, 1993, p.215-219
• [40] Werno M., Juszkiewicz-Bednarczyk B.; Przegląd metod i sprzętu do badań geotechnicznych na morzu (Review of methods and equipments for geotechnical tests on sea), InżynieriaMorska i Geotechnika, No. 5, 2009 (in Polish)
• [41] Winter B.J., Brown D.R., Michels K.M.; Statistical principals in experimental design, McGrac, New York, 1991
• [42] Wolski W.; Penetration Testing in Poland, Proceedings of the European Symposium on Penetration Testing in Stockholm, ESOPT, 1, 1974