PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Analytical model for the strength prediction of HPC consisting of cementitious composites

Autorzy
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper presents analytical models for compressive strength of high performance concrete. High performance concrete was developed using various cementitious composites to form various binary and ternary blending combinations consisting of normal portland cement, fly ash, slag and silica fume. Compressive strength of concrete containing normal portland cement, fly ash/slag and silica fume at various ages is reported. Based on the experimentally obtained results, analytical prediction models have been developed. These models are based on the quadratic response surface model having predictive capabilities and permitted the optimization of the parameters under study over the experimental domain.
PL
W artykule przedstawiono model analityczny umożliwiający określanie wytrzymałości na ściskanie betonu wysokowartościowego. Badany beton wysokowartościowy wykonano z mieszanek o różnym składzie, z zastosowaniem cementu portlandzkiego normalnego, popiołu lotnego, żużla oraz pyłu krzemionkowego. W artykule zestawiono wartości wytrzymałości na ściskanie badanych mieszanek betonowych o różnym składzie otrzymane w wyniku badań doświadczalnych. Bazując na wynikach badań doświadczalnych opracowano model analityczny. W modelu wykorzystano równanie kwadratowe, w którym możliwy jest dobór parametrów funkcji oraz jej optymalizacja na podstawie badań doświadczalnych.
Rocznik
Strony
89--96
Opis fizyczny
Bibliogr. 8 poz.
Twórcy
autor
  • Department of Civil Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Kingdom of Saudi Arabia, miqbal@ksu.edu
Bibliografia
  • 1. Malhotra VM., Mehta P.K.; Pozzolanic and cementi-tious materials-advances in concrete technology. Gordon and Breach, Netherlands, 1996
  • 2. FIP Report; Condensed silica fume in concrete. FIP State-of-art Report, FIP Commission of Concrete, Thomas Telford House, London, 1988
  • 3. Ryan B.; Minitab handbook. Belmont, 1994
  • 4. Khan M.I., Lynsdale C.J., Waldron P.; Porosity and strength of PFA/SF/OPC ternary blended paste. Cement and Concrete Research, Vol.30, 2000; p. 1225-1229
  • 5. Khan M.I.; Isoresponses for strength, permeability and porosity of high performance blended cement mortar. Building and Environment, Vol.38, No.8, 2003; p.1051-1056
  • 6. Khan M.I., Lynsdale C.J., Choo B.S.; Pore structure of high strength cement mortar containing fly ash and microsilica. Supplementary Proc. ACI/CANMET International Symposium on Sustainable Development of Cement and Concrete, San Francisco, ACI SP 202, USA, 2001; p.223-236
  • 7. Mehta R.K., Gjorv O.E.; Properties of Portland cement concrete containing fly ash and condensed sil- ica fume. Cement and Concrete Research, Vol.12, No.5,1982; p.587-595
  • 8. Khan M.I.; Nanostructural and microstructural behavior of concrete containing cementitious com-posites. Proc. International Conference on Microstructure Related Durability of Cementitious Composites, Nanjing, China, 13-15 October 2008
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSL3-0022-0029
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.