Prediction of the thermal spalling risk of concrete structures exposed to high temperatures

• Autorzy: Gawin D. , Pesavento F.
• Języki publikacji: EN

Abstrakty

EN

A very characteristic mode of concrete damage at high temperature, especially for the materials characterized by a low intrinsic permeability, like for example HPC or UHPC, is so called thermal spalling. In this paper the results of simulations performed with a mathematical model, which considers concrete as multiphase porous material, are applied to define some spalling indexes based on various collapse mechanisms. A validation of the quantities proposed, carried out by means of a comparison with some experimental test results, is presented. Moreover, the results of a simulation dealing with a structural element exposed to a parametric fire, including a cooling phase, usually not considered in analyses, is described and discussed.

PL

Termiczne odpryskiwanie betonu (ang. thermal spalling) jest bardzo charakterystyczną formą zniszczenia tego materiału pod wpływem wysokiej temperatury. Zagrożone są zwłaszcza materiały o niskiej przepuszczalności, jak na przykład betony wysokiej i bardzo wysokiej wytrzymałości. W niniejszej pracy, bazując na modelu matematycznym betonu, traktowanego jako wielofazowy materiał porowaty, zdefiniowano pewne liczby kryterialne (tzw. indeksy spallingu), które charakteryzują niebezpieczeństwo wystąpienia termicznego odpryskiwania betonu, przy założeniu różnych mechanizmów zniszczenia materiału. Przedstawiono także wyniki eksperymentalnej weryfikacji zaproponowanych kryteriów zniszczenia betonu w wysokiej temperaturze. Ponadto opisano i przedyskutowano wyniki symulacji dotyczących betonowych elementów konstrukcyjnych, poddanych działaniu parametrycznego pożaru, z uwzględnieniem fazy studzenia konstrukcji.

Słowa kluczowe

EN

thermal spalling; concrete; parametric fire; damage material

PL

beton; parametryczny pożar; termiczne odpryskiwanie betonu; niszczenie materiału

• Wydawca: Silesian University of Technology
• Czasopismo: Architecture Civil Engineering Environment
• Rocznik: 2009
• Tom: Vol. 2, no. 1
• Strony: 49--60
• Opis fizyczny: Bibliogr. 26 poz.

Twórcy

autor

Gawin D.

autor

Pesavento F.

• Technical University of Lodz, Lodz, Poland,

Bibliografia

• [1] Pesavento F.; Non linear modelling of concrete as multiphase porous material in high temperature conditions, PhD thesis, University of Padova, Padova (Italy), 2000
• [2] Schrefler B.A., Pesavento F. Multiphase flow in deforming porous material, Computer and Geotechnics, Vol.31, 2004; p.237-250
• [3] Pesavento E, Gawin D., Schrefler B.A.; Modelling cementitious materials as multiphase porous media: theoretical framework and applications, Acta Mech, DOI:10.1007/s00707-008-0065-z, Vol.201, 2008; p.313-339
• [4] Gray W.G„ SchreflerBA.; Thermodynamic Approach to Effective Stress in Partially Saturated Porous Media, Eur. J. Mech. A/Solids, Vol.20, 2001; p.521-538
• [5] Gawin D„ Pesavento F, & SchreflerB.A:, Modelling of deformations of high strength concrete at elevated temperatures, Mat. Struct., Vol.37, No.268, 2004; p.218-236
• [6] Gray W.G., Schrefler B.A., Pesavento F. The solid phase stress tensor in porous media mechanics and the Hill-Mandel condition, Int. J. Physics and Mechanics of Solids, in press. Acta Mechanica paper
• [7] Gawin D„ Pesavento F., & Schrefler B.A.; Modelling of hygro-thermal behaviour of concrete at high temperature with thermo-chemical and mechanical material degradation, Comput. Methods Appl. Mech. Engrg., Vol.192, 2003; p. 1731-1771
• [8] Gawin IX, Pesavento R, & SchreflerB.A.; Simulation of damage-permeability coupling in hygro-thermo-mechanical analysis of concrete at high temperature, Commun. Nunier. Meth. Engng, Vol.18, No.2, 2002; p. J13-119
• [9] Gawin D„ Pesavento E, & Schrefler B.A.; Modelling of hygro-thermal behaviour and damage of concrete at temperature above the critical point of water, Int. J. Numer. Anal. Meth. in Geomech., Vol.26, No.6,2002; p.537-562
• [10] Khomy G.A:, Strain components of nuclear-reactor-type concretes during first heating cycle, Nuclear Engineering and Design, Vol.156,1995; p.313-321
• [11] Mazars J:, Description of the behaviour of composite concretes under complex loadings through continuum damage mechanics, Proc. of Tenth U.S. National Congress of Applied Mechanics, J.P. Lamb (ed.), 1989; ASME
• [12] Pijaudier-Cabot /.; Non Local Damage, H.B. Muhlhaus (ed.), Continuum models for materials with microstructure, Wiley & Sons, Chichester, 1995; p.105-143
• [13] Gawin, D., Pesavento, F. & Schrefler, BA.; Modelling damaging processes of concrete at high temperature with thermodynamics of multiphase porous media, J. of Theoretical and Applied Mechanics, Vol.44, No.3, 2006; p.505-532
• [14] Schrefler B.A., Bmnello P., Gawin D., Maiorana C.E., Pesavento F. Concrete at high temperature with application to tunnel fire, Comp. Mech, Vol.29, 2002; p.43-51
• [15] Witek A., et al.; Finite Element analysis of various methods for protection of concrete structures against spalling during fire, Comp. Mech., Vol.39, No.3,2007; p.271-292
• [16] Gawin D., Pesavento F., & Schrefler B.A.; Towards prediction of the thermal spalling risk through a multiphase porous media model of concrete, Comput. Methods Appl. Mech. Engrg., Vol.195, 2006; p.5707-5729
• [17] Saito H.; Explosive spalling of prestressed concrete in fire, Internal Report No 22, Building Research Institute, Tokyo, Japan, 1965
• [18] Harmathy T.Z.; Effect of moisture on the fire endurance of building elements, ASTM special technical publication 385, Philadelphia, USA, 1965
• [19] Zhukov W.: Explosive failure of concrete during a fire, (in Russian). Translation No DT 2124, Joint Fire Research Organization, Borehamwood, 1975
• [20] Sullivan P.J., Akhtaruzzaman A A.; Explosive spalling of concrete exposed to high temperature, Proc. of First International on Structural Mechanics in Reactor Technology, Berlin, 1971
• [21] Connolly R.J.; The spalling of concrete in fires, PhD thesis, Aston University, 1995; p.294
• [22] Klioylou N.:Modelling of moisture migration and spalling behaviour in non-uniformly heated concrete, PhD thesis, Imperial College, London, 1997; p.1147
• [23] Bażant Z.P., Planas J:, Fracture and size effect in concrete and other quasi-brittle materials, CRC Press, New York, 1998
• [24] Phan, L.T.; Fire performance of high-strength concrete: a report of the state-of-the-art, Research Report NISTIR 5934, NIST, Gaitherburg, 1996
• [25] Phan L.T., Lawson J.R., Davis F.L.; Effects of elevated temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete, Materials and Structures, Vol.34, 2001; p.83-91
• [26] UNE-EN 1991-1-2, Eurocode 1: G. Parte 1-2: Azioni generali. Azioni su strutture esposte al fuoco (General actions - Actions on structures exposed to fire), Maggio 2004