Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Autoscala: an aid for different ionosondes

Warianty tytułu
Języki publikacji
Autoscala is a software to automatically scale ionospheric characteristics from an ionogram. Initially it was only applied to the ionograms recorded by the AIS-INGV ionosondes installed at Rome and Gibilmanna (Italy), and Tucumán (Argentina), that are not able to record the polarization of the received echo. Recently, Autoscala was also applied to the ionograms recorded by the AIS-Parus ionosonde installed at Moscow (Russia), that is not able to tag the received echo in terms of polarization, and by the VISRC2 ionosonde installed at Warsaw (Poland) that is instead able to perform the polarization tagging of the ordinary and extraordinary echoes. This work shows different examples of processing performed on ionograms recorded by all these three different types of ionosondes.
Opis fizyczny
Bibliogr. 16 poz.
  • Belehaki, A., L. Cander, B. Zolesi, J. Bremer, C. Juren, I. Stanislawska, D. Dialetis, and M. Hatzopoulos (2005), DIAS Project: The establishment of a European digital upper atmosphere server, J. Atmos. Sol.-Terr. Phys. 67, 12, 1092-1099.
  • Belehaki, A., L. Cander, B. Zolesi, J. Bremer, C. Juren, I. Stanisławska, D. Dialetis, and M. Hatzopoulos (2007), Ionospheric specification and forecasting based on observations from European ionosondes participating in DIAS project, Acta Geophys. 55, 3, 398-409.
  • Gajdanskij, V.I., A.L. Karpenko, I.V. Krasheninnikov, N.I. Manaenkova, S.V. Silvestrov, and A.A. Smirnov (1996), The base network digital ionospheric station “PARUS”, Proc. 25th General Assembly of the International Union of Radio Science, abstract 360.
  • Gilbert, J.D., and R.W. Smith (1988), A comparison between the automatic ionogram scaling system ARTIST and the standard manual method, Radio Sci. 23, 6, 968-974.
  • Jacobs, L., A.W.V. Poole, and L.A. McKinnell (2004), An analysis of automatically scaled F1 layer data over Grahamstown, South Africa, Adv. Space Res. 34, 9, 1949-1952.
  • Materassi, M., and C.N. Mitchell (2005), A simulation study into constructing of the sample space for ionospheric imaging, J. Atmos. Sol.-Terr. Phys. 67, 12, 1085-1091.
  • McNamara, L.F. (2006), Quality figures and error bars for autoscaled Digisonde vertical incidence ionograms, Radio Sci. 41, RS4011.
  • McNamara, L.F., D.T. Decker, J.A. Welsh, and D.G. Cole (2007), Validation of the Utah State University Global Assimilation of Ionospheric Measurements (GAIM) model predictions of the maximum usable frequency for a 3000 km circuit, Radio Sci. 42, RS3015.
  • Pezzopane, M., and C. Scotto (2005), The INGV software for the automatic saling of foF2 and MUF(3000)F2 from ionograms: A performance comparison with ARTIST 4.01 from Rome data, J. Atmos. Sol.-Terr. Phys. 67, 12,1063-1073.
  • Pezzopane, M., and C. Scotto (2007), Automatic Scaling of critical frequency foF2 and MUF(3000)F2: A comparison between Autoscala and ARTIST 4.5 on Rome data, Radio Sci. 42, RS4003.
  • Pezzopane, M., and C. Scotto (2008), A method for automatic scaling of F1 critical frequencies from ionograms, Radio Sci. 43, RS2S91.
  • Pezzopane, M., C. Scotto, I. Stanisławska, and G. Juchnikowski (2008), Autoscala applied at the Ionospheric Station of Warsaw, INAG (Ionosonde Network Advisory Group) Bulletin 69,
  • Reinisch, B.W., and X. Huang (1983), Automatic calculation of electron den sity profiles from digital ionograms 3. Processing of bottomside ionograms, Radio Sci. 18, 3, 477-492.
  • Scotto, C. (2009), Electron density profile calculation technique for Autoscala ionogram analysis, Adv. Space Res. 44, 6, 756-766.
  • Scotto, C., and M. Pezzopane (2007), A method for automatic scaling of sporadic E layers from ionograms, Radio Sci. 42, RS2012.
  • Zuccheretti, E., G. Tutone, U. Sciacca, C. Bianchi, and B.J. Arokiasamy (2003), The `new AIS-INGV digital ionosonde, Ann. Geophys.-Italy 46, 4, 647-659.
Typ dokumentu
Identyfikator YADDA
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.