Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The work is a continuation of research on the use of water mist cooling in order to increase efficiency of the die-casting process for aluminum alloys. The paper describes the multipoint sequential cooling system of the casting die and its computer control and monitoring. It also includes results of the tests and analysis of cooling methods during making of the casting. These methods differ from each other in the sequence of casting die cooling and cause effective changes in microstructure and mechanical properties of castings made of AlSi11 alloy. The study demonstrated that the use of multipoint sequential cooling with water mist affects the microstructure refinement and reduces the segregation in the cast as well as more than by 20% increases the mechanical properties of castings in the rough state. The study also demonstrates that the sequential cooling of casting die accelerates the cooling of the casting and shortens die-casting cycle.
Czasopismo
Rocznik
Tom
Strony
145--150
Opis fizyczny
Bibliogr. 8 poz., rys., tab., wykr.
Twórcy
autor
- Department of Materials Engineering and Production Systems, Technical University of Lodz, 1/15 Stefanowskiego Street 90-924 Lodz, Poland, ryszard.wladysiak@p.lodz.pl
Bibliografia
- [1] Władysiak R. (2007). Effective Intensification Method of Die Casting Process of Silumins. Archives of Metallurgy. 52(3), 529-534.
- [2] Władysiak R. (2007). Assessment of Effectiveness of Water Mist Cooling of Casting Die. Archives of Foundry Engineering, 7(4), 175-182.
- [3] Władysiak R. (2008). Water mist effect on heat transfer coefficient in cooling of casting die. Archives of Foundry Engineering, 8(3), 227-236.
- [4] Władysiak R.( 2008). Water mist effect on cooling range and efficiency of casting die. Archives of Foundry Engineering, 8(4), 213-218.
- [5] Władysiak R. (2010). Effect of water mist on cooling process of casting die and microstructure of AlSi11 alloy. Archives of Metallurgy and Materials, 55(3), 939-946.
- [6] Władysiak R. (2010). Water mist effect on cooling process of casting die and microstructure of AlSi9 alloy. Archives of Foundry Engineering, 10(2), 185-194.
- [7] Władysiak R. (2011): Heat transfer analysis during cooling of die with use of water mist. Archives of Foundry Engineering, 11(2), 167-174.
- [8] Władysiak R., Budzyński P. (2012): Structure of water mist and its impact on cooling efficiency of casting die. Archives of Foundry Engineering, 12(2), 251-260.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ7-0006-0052