Preliminary research on granulation process of dust waste from reclamation process of moulding sands with furan resin

• Autorzy: Kamińska J. , Dańko J.
• Języki publikacji: EN

Abstrakty

EN

The results of investigations of the granulation process of foundry dusts generated in the dry mechanical reclamation process of used sands, where furan resins were binders are presented in the paper. Investigations concerned producing of granules of the determined dimensions and strength parameters. Granules were formed from the dusts mixture consisting in 50 mass % of dusts obtained after the reclamation of the furane sands and in 50 mass % of dusts from sands with bentonite. Dusts from the bentonite sands with water were used as a binder allowing the granulation of after reclamation dusts from the furane sands. The following parameters of the ready final product were determined: moisture content (W), shatter test of granules (Wz) performed directly after the granulation process and after 1, 3, 5, 10 days and nights of seasoning, water-resistance of granules after 24 hours of being immersed in water, surface porosity ep and volumetric porosity ev. In addition the shatter test and water-resistance of granulate dried at a temperature of 105 C were determined. Investigations were performed at the bowl angle of inclination 45o, for three rotational speeds of the bowl being: 10, 15, 20 rpm. For the speed of 10 rpm the granulation tests of dusts mixture after the preliminary mixing in the roller mixer and with the addition of water-glass in the amount of 2% in relation to the amount of dust were carried out. The obtained results indicate that the granulator allows to obtain granules from dusts originated from the reclamations of moulding sands with the furane resin with an addition of dusts from the bentonite sands processing plants.

Słowa kluczowe

EN

moulding sand; after reclamation dust; granulation; environment protection

PL

masa formierska; pył poregeneracyjny; granulacja; ochrona środowiska

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2012
• Tom: Vol. 12, iss. 3
• Strony: 53--58
• Opis fizyczny: Bibliogr. 13 poz., rys., tab., wykr.

Twórcy

autor

Kamińska J.

autor

Dańko J.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23, 30-059 Krakow, Poland,

Bibliografia

• [1] Baricowá D., Pribulowá A. & Demeter P. (2010). Comparison of possibilities the blast furnace and cupola slag utilization by concrete production. Archives of Foundry Eingineering 10(2), 15-18.
• [2] Pribulowá A., Baricowá D., Futaš P. & Gengel' P. (2010). Possibilities of pelletizing and briquetting of dust from casting grinding. Archives of Foundry Eingineering 10(2), 123-126.
• [3] Dańko R. (2011). Innovative developments in sand reclamation technologies. Metalurgija - Metallurgy 50(2), 93-96.
• [4] Dańko R. & Holtzer, M. (2010). Moulding sands grain size investigations by means of the laser method of measurement. Archives of Metallurgy and Materials 55(3), 787-794.
• [5] Dańko R., Holtzer, M. & Dańko, J. (2011). Reclamation of alkaline spent moulding sands of organic and inorganic type and their mixtures. Archives of Foundry Engineering 11(4), 25-30.
• [6] Dańko, R. (2009). Analysis of effectiveness of used sands reclamation treatment - in various technological devices. Archives of Foundry Engineering 9(4), 31-36.
• [7] Dańko, R. (2010). Experiences gathered during reclamation of used water glass and bentonite sands in extra low and ambient temperature. International Journal of Cast Metals Research 23(2), 92-96. DOI: 10.1179/174313309X451270.
• [8] Praca zbiorowa (2009). Możliwości ograniczenia i metod zagospodarowania odpadów z procesów odlewniczych. Kraków: Wydawnictwo Naukowe AKAPIT.
• [9] Dańko J., Holtzer, M., Dańko, R. & Grabowska, B. (2008). Analiza i struktura odpadów z krajowych odlewni. Archives of Foundry Engineering, vol. 8, special issue 2/2008, pp. 5-9.
• [10] Lewandowski, J. L. (1997). Tworzywa na formy odlewnicze. Kraków: Wydawnictwo Naukowe AKAPIT.
• [11] Kamińska, J. & Skrzyński, M. (2011). Physical, chemical and strength properties of dust from the bentonite sands treatment plants. Metallurgy and Foundry Engineering 37(2), 189-195.
• [12] Kamińska, J. (2011). Dean's Grant, No 15.11.170.417.
• [13] Wykorzystanie nowoczesnych technologii regeneracji zużytych mas formierskich do opracowania koncepcji i wykonania innowacyjnego regeneratora wibracyjnego (2009-2012). No WND-POIG.01.03.01-12-007/09-00.