New look at the process of reclamation of moulding sands

• Autorzy: Dobosz S. M. , Major-Gabryś K. , Hosadyna M.
• Języki publikacji: EN

Abstrakty

EN

This paper presents a new perspective on the issue of reclamation of moulding and core sands. Taking as a premise that the reclamation process must remain on the surface of grains some not separated binding materials rests, it should be chosen the proper moulding sand's composition that will be least harmful for the reclaim quality. There are two different moulding and core sands taken into examinations. The researches prove that a small correction of their compositions (hardener type) improves the quality of the received reclaims. Carried out in this article studies have shown that such an approach to the problem of reclamation of the moulding and core sands is needed and reasonable.

Słowa kluczowe

EN

innovative foundry materials; innovative foundry technologies; moulding sand; reclaim; ester hardener

PL

innowacyjne materiały odlewnicze; innowacyjne technologie odlewnicze; masa formierska

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2012
• Tom: Vol. 12, iss. 3
• Strony: 19--24
• Opis fizyczny: Bibliogr. 19 poz., rys., wykr.

Twórcy

autor

Dobosz S. M.

autor

Major-Gabryś K.

autor

Hosadyna M.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Department of Moulding Materials, Mould Technology and Foundry of Non-ferrous Metals, Al. Mickiewicza 30, 30-059 Kraków, Poland,

Bibliografia

• [1] Dańko, J., Dańko, R. & Łucarz, M. (2007). Processes and Equipment for used sand reclamation (in Polish) (pp. 285-291), Scientific Edition "Akapit", ISBN 978-83-89541-88-8.
• [2] Maniowski, Z., Pezarski, F. & Izdebska-Szanda, I. (1990). Author help in implementation of mechanical sand reclamation process of self-hardening moulding sands based on water-glass with a disc reclamation device in ZM "POMET"-Poznan Foundries (in Polish), Transactions of the Foundry Research Institute Krakow, 7-25. ISSN 1899-2439.
• [3] Wheeler, R. (1997). A solution to enable the thermal reclamation of alkaline phenolic ester Bondem sands, Foundryman 90(7), 255-257.
• [4] Spillner, A. (1998). Successful pilot project for the reclamation of used sand from water glass in aluminum foundries (in German), Giesserei-Prax. 9, 366-368.
• [5] Łucarz, M., Dańko, J., Ludwin, S. & others (2002). Patent RP P-317782. Poland. Reclamation segment of centrifugal device (in Polish).
• [6] Łucarz, M. (1998). Analysis of the impact of centrifugal reclamation device construction on effects of its work (in Polish). In 12th Reporting Conference Metallurgy 98, 23-26 September 1998 (pp. 205-210), Krynica, Poland.
• [7] Polzin, H. (1999). The reclamation of moulding sands with water glass in several rounds (in German), Giesserei-Prax. 3, 101-105.
• [8] Dańko, J. & Lewandowski, J. L. (1999). Reclamation of self-hardening moulding sand with water glass (in Polish), Foundry Revision 3, 91-93.
• [9] Pezarski, F., Smoluchowska, E., Maniowski, Z., Izdebska-Szanda, I. & Bogacz, T.(2000). Sands reclamation research of self-hardening mouldig sands mixed with sodium silicate and an alkali resole resin (in Polish), Solidification of Metals and Alloys 2(43), 427-433.
• [10] Pezarski, F, Izdebska-Szanda, I. & Maniowski Z. (2003). Research of sands from used foundry moulding sands according to the vibration method (in Polish), Materialove inzinierstvo 10(3), 275-278.
• [11] Fan Zitian, Huang Naiyu, Wang Huafang, Dong Xuanpu (2005). Dry reusing and wet reclaiming of used sodium silicate sand, China Foundry (1), 38-43.
• [12] Jelinek, P. (2004). Binding systems of foundry moulding sands (in Czech), OFTIS Ostrava. ISBN 80-239-2188-6.
• [13] Major-Gabryś, K. (2007). Moulding sands with water glass having increased knock-out properties (in Polish). Unpublished doctoral dissertation, AGH-University of Science and technology, Krakow.
• [14] Major-Gabryś, K. & Dobosz, S. M. (2010). Loose self-hardening moulding sands with hydrated sodium silicate and liquid ester hardeners (in Polish). In Committee of Metallurgy of Polish Academy of Sciences, Polish Metallurgy in 2006-2010 (pp. 328-335). Krakow, Scientific Edition "Akapit".
• [15] Hosadyna, M., Dobosz, S. M. & Jelinek, P. (2009). The diffusion of sulphur from moulding sand to cast and methods of its elimination, Archives of Foundry Engineering 9(4), 73-76. ISSN 1897-3310.
• [16] Dobosz, S. M. & Hosadyna, M. (2010). The new hardeners for self-hardened moulding sands having lower sulphur emission (In Polish). In 2nd Conference: Moulding and core Materials, 29-31 August 2010 (pp. 1-20), Kazimierz Dolny, Poland.
• [17] Hosadyna, M., Dobosz, S. M. & Major-Gabryś, K. (2011). Influence of the type of the hardener on the sulphur diffusion of moulding sand to the casting surface. Archives of Foundry Engineering 11(spec. Iss. 2), 87-92. ISSN 1897-3310.
• [18] Hosadyna, M., Dobosz, S. M. & Kusiński, J. (2011). Quality of the reclamation sand and casting surface structure. Archives of Foundry Engineering 11(1), 39-42. ISSN 1897-3310.
• [19] Hosadyna, M., Dobosz, S. M. & Kusiński, J. (2012). Influence of over-coolong the nodular cast iron to the graphite form in the surface layer. Archives of Foundry Engineering 12(1), 43-46. ISSN 1897-3310.