The influence of Glassex additive on properties of microwave-hardened and self-hardened moulding sands with water glass

• Autorzy: Major-Gabryś K. , Dobosz S. M. , Jakubski J. , Stachowicz M. , Nowak D.
• Języki publikacji: EN

Abstrakty

EN

The article takes into consideration the researches concerning inserting the Glassex additive to the microwaved-hardened and self-hardened moulding sands with water glass. In the research different types of ester hardeners to self-hardened moulding sands with water glass were used. The influence of Glassex additive on retained strength of moulding sands with different hardeners and prepared by different technologies of hardening were tested. The influence of different hardeners and the technology of hardening on retained strength of moulding sand with water glass and the Glassex additive were also estimated.

Słowa kluczowe

EN

moulding sand; water glass; ester hardener; microwave hardening

PL

masa formierska; szkło wodne; mikrofale

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2012
• Tom: Vol. 12, iss. 1
• Strony: 130--134
• Opis fizyczny: Bibliogr. 15 poz., wykr.

Twórcy

autor

Major-Gabryś K.

autor

Dobosz S. M.

autor

Jakubski J.

autor

Stachowicz M.

autor

Nowak D.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Department of Moulding Materials, Mould Technology and Foundry of Non-ferrous Metals, Al. A. Mickiewicza 30, 30-059 Krakow, Poland,

Bibliografia

• [1] Jelinek, P. (2004). Binding systems of foundry moulding sands. Ostrava. (In Czech).
• [2] Baliński A. & Izdebska-Szanda I. (2004). Influence of morphoactive agents of the soluble sodium silicate on temperature changes in moulding sands with this binder. Archives of Mechanical Technology and Automation. 19-29. (in Polish).
• [3] Baliński A., Stechman M. & Różycka D. (2003). Influence of modification of the soluble sodium silicate with morphoactive agents on the mechanical properties of the moulding sands in temperatures to 900oC. Materials Engineering. 10 (3), 271-274.
• [4] Herecova L. & Jelinek P. (2006). Esters of carbon acid - hardeners for binders based on sodium silicate. Transactions of the VSB - Technical University of Ostrava. 79-86. (In Czech).
• [5] Dobosz St. M. & Major-Gabryś K. (2003). The new additive to the moulding sands with water glass In DOKSEM (38-41). Słowacja, Rajecke Teplice. (In Polish).
• [6] Dobosz St. M. & Major-Gabryś K. (2003). The new way of upgrading the moulding sand's with water Glass knock-out properties. In Materials of the XXVII Scientific Conference for Foundryman Day, 2003, 81-85, Krakow. (in Polish).
• [7] Dobosz St. M. & Major-Gabryś K. (2004). The surface phenomena in contest of moulding sands' with water Glass knock-out properties. Archives of Mechanical Technology and Automation. 49-56. (In Polish).
• [8] Dobosz St. M. & Major-Gabryś K. (2004). Glassex - The new additive upgrading moulding sand's with water Glass knock-out properties. Archives of Foundry Engineering. 4 (13), 63-68. (In Polish).
• [9] Major-Gabryś K. & Dobosz St. M. (2004). The estimation of knock-out properties of moulding sands with water glass and Glassex additive. In Materials of the XXVIII Scientific Conference for Foundryman Day, 2004, 83-87, Krakow. (In Polish).
• [10] Dobosz St. M., Jelinek P. & Major-Gabryś K. (2011). Development tendencies of moulding and core sands. China Foundry. 8 (4), 438-446.
• [11] Stachowicz M., Granat K. & Nowak D. (2011). Influence of water-glass grade and quantity on residual strength of microwave-hardened moulding sands. Part 1. Archives of Foundry Engineering. 11 (1), 93-98.
• [12] Stachowicz M., Granat K. & Nowak D. (2011). Influence of water-glass grade and quantity on residual strength of microwave-hardened moulding sands. Part 2. Archives of Foundry Engineering. 11 (2), 143-148.
• [13] Stachowicz M., Granat K. & Nowak D. (2011). Influence of \alfa-Al2O3 on residual strength of microwave-hardened moulding sands with water-glass. Archives of Foundry Engineering. 11 (Special Issue 2), 203-208. (In Polish).
• [14] Major-Gabryś K. & Dobosz St. M. (2010). Self-hardened moulding sands with hydrated sodium silicate and liquid ester hardeners. Polish Metallurgy in 2006-2010 (328-335). Krakow: Committee of Metallurgy of the Polish Academy of Science. (In Polish).
• [15] Major-Gabryś K. & Dobosz St. M. (2011). The influence of Glassex additive on technological properties and knock-out properties of moulding sands with hydrated sodium silicate and new ester hardeners. Metallurgy and Foundry Engineering. 37 (1), 33-40.