Production of castings by patternless process

• Autorzy: Pastirčák R. , Urgela D. , Krivoš E.
• Języki publikacji: EN

Abstrakty

EN

This paper deals with production of safety inlay for steam locomotive valve by the Patternless Process method. For the moulds creation was used moulding mixtures of II. generation, whereas binder was used a water glass. CNC miller was used for creation of mould cavity. Core was created also by milling into block made of moulding compound. In this article will be presented also making of 3D model, setting of milling tool paths and parameters for milling.

Słowa kluczowe

EN

patternless process; mould; CNC machining; moulding mixture; prototype casting

PL

forma odlewnicza; obróbka CNC; masa formierska; odlew prototypowy

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2012
• Tom: Vol. 12, iss. 1
• Strony: 87--92
• Opis fizyczny: Bibliogr. 6 poz., rys., tab.

Twórcy

autor

Pastirčák R.

autor

Urgela D.

autor

Krivoš E.

• University in Žilina, Univerzitná 8215/1, 010 26 Žilina, Faculty of Mechanical Engineering, Department of Technological Engineering,

Bibliografia

• [1] Groover, P. M. (2002). Fundamentals of Modern Manufacturing. (2nd ed.). New York: J. Wiley & Sons, Inc.
• [2] Zhongde, S., Li, X., Feng, L. & Li, Z. (2010). Rapid Pattern Casting Technology On CNC Manufacturing. In World Foundry Congress, 16-20. Hongzhou, China.
• [3] Bolibruchová, D. (2010). Zlievarenská technológia, Žilinská univerzita v Žiline, Strojnícka fakulta.
• [4] Brůna, M., Bolibruchová, D. & Sládek, A. Optimalizácia rozvádzacieho kanála pri odlievaní hliníkových zliatin = Runner optimalization for pouring aluminium castings. Sborník vědeckých prací Vysoké školy báňské-Technické univerzity Ostrava.
• [5] Medlen, D. & Bolibruchová, D. (2011). Influence of antimony on the mechanical properties and gas content of alloy AlSi6Cu4. Archives of Foundry Engineering. 11 (1).
• [6] Medlen, D., Nová, I., Bolibruchová, D. & Urgela, D. (2011). Influence of sb on gas content and flowability of alloy AlSi6Cu4. ACC Journal. XVII (1).