Evaluation of cast GX40CrNiSiNb24-24 steel after-service conditions

• Autorzy: Zapała R. , Kalandyk B. , Głownia J.
• Języki publikacji: EN

Abstrakty

EN

In this study, an attempt was made to assess changes in the microstructure of centrifugally cast tubes from GX40CrNiSiNb24-24 steel after a long-term operation under the conditions of a catalytic conversion of methane with steam. Changes in phase morphology occurring as a result of high temperature were identified.

Słowa kluczowe

EN

metallography; heat resistance Cr-Ni cast steel; microstructure; high-temperature degradation; carbides

PL

metalografia; odporność termiczna; staliwo Cr-Ni; mikrostruktura; węgliki

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2011
• Tom: Vol. 11, iss. 4
• Strony: 157--162
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Zapała R.

autor

Kalandyk B.

autor

Głownia J.

• Department of Cast Alloys and Composites Engineering, Faculty of Foundry Engineering, AGH University of Science and Technology, Reymonta 23 Str., 30-059 Krakow, Poland,

Bibliografia

• [1] W. Jasiński, Durability of catalic tubes of ammonia reformers, Wydawnictwo Uczelniane Zachodniopomorskiego Uniwersytetu Technologicznego w Szczecinie, Szczecin (2009) (in Polish).
• [2] W. Jasiński, B. Piekarski, M. Garbniak, Properties of in 519 superalloys after 25760 hours of exploitation, Foundry Journal, No. 3 (2009) 114-119 (in Polish).
• [3] W. Jasiński, P. Zawada, Microstructure of H39WM superalloys after 6-years explotation, Archives of Foundry, vol. 18, No. 4 (2006) 491-496 (in Polish).
• [4] J. Łabanowski, Examination of degradation process of catalytic tubes during exploitation in reformer methane, Wydaw. P. G., Gdańsk (2003) (in Polish).
• [5] M. Blair, T. L. Stevens, Steel castings handbook. Materials Park: Steel Founders: ASM International (1995).
• [6] B. Mikułowski. Heat resistant and creep resistant alloys. Superalloys, Wydaw. AGH, Kraków (1997) (in Polish).
• [7] S. Lamb S, CASTI handbook of stainless steels & nickel alloys. CASTI Publ. Edmonton (2001).
• [8] A. A. Kaya, P. Krauklis, D. J. Young, Microstructure of HK40 alloy after high temperature service in oxidizing/carburizing environment. Part 1. Materials Characterization, vol. 49, No 1 (2002) 11-21.
• [9] R. C. Ecob, R. C. Lobb, V. L. Kohler, The formation of G-phase in 20/25Nb stainless steel AGR fuel cladding alloy and its effect on creep properties. Journal of Materials Science, vol. 22, No 8 (1987) 2867-2880.
• [10] Ustasiak M., Jasiński W.: Wpływ warunków eksploatacji na strukturę stopów 24/24Nb. Inżynieria Materiałowa, vol. 21, No 1 (2000) 28-32.
• [11] Barbabela G. D., de Almeida L., da Silveira T., Le May I.: Role of Nb in modifying the microstructure of heat -resistant cast HP steel. Materials Characterization, vol. 26, (1991) 193-197.