Heat-insulating moulding sand with the glycol addition

• Autorzy: Cholewa M. , Szuter T.
• Języki publikacji: EN

Abstrakty

EN

The article presents a selection of the composition and basic properties of highly insulating moulding sand. Sandmix is designed especially for thin-walled castings with high tendency to oxidation - particularly in spatial cores skeleton castings. An example of matrix of sandmix are aluminosilicate microspheres and the binder is bentonite plasticized with water and polyglycol. By using the microspheres high insulation, high mechanical strength and low specific weight core sand was obtained. Addition of polyglycol improved the mechanical properties, deformation characteristics, surface smoothness and reduced friability of sandmix.

Słowa kluczowe

EN

polyglycol; moulding sand; core; skeleton castings

PL

poliglikol; masa formierska; odlew szkieletowy

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2011
• Tom: Vol. 11, iss. 3
• Strony: 61--64
• Opis fizyczny: Bibliogr. 10 poz., wykr.

Twórcy

autor

Cholewa M.

autor

Szuter T.

• Silesian University of Technology, Foundry Department, Towarowa 7, 44-100 Gliwice,

Bibliografia

• [1] S. M. Dobosz, Water in moulding and core sands, WN Akapit, Kraków (2006) (in Polish).
• [2] L. Lewandowski, Moulding Materials, PWN Warszawa, 1971( in Polish).
• [3] W. Sakwa, T. Wachelko, Theory and practice of technology of moulding materials, Katowice, (1970) (in Polish).
• [4] S. Tunc, O. Duman, The effect of different molecular weight of poly(ethylene glycol) on the electrokinetic andrheological properties of Na-bentonite suspensions, Colloids and Surfaces A: Physicochem. Eng. Aspects 317 (2008) 93-99.
• [5] W. F. Bradley, Molecular Associations between Mont-morillonite and Some Polyfunctional Organic Liquids, (1945).
• [6] P. F. Luckhum, S. Rossi, The colloidal and rheological properties of bentonite suspension, Advances in Colloid and Interface Science. 82 (1999) p. 43-92.
• [7] M. Cholewa, T. Szuter, Geometrical and mechanical analysis of 3D casted skeleton structure, Archives of Foundry Engineering, No. 2, vol. 10 , p. 23-26.
• [8] X. Zhao, K. Urano, and S. Ogasawara, Adsorption of polyethylene glycol from aqueous solution on montmorillonite clays Colloid & Polymer Science Colloid Polym Sci 267 p.899-906 (1989).
• [9] R. Klecan, Z. Żarnatal, Intensification of quicklime grinding in ball and roll - bowl mills using Imoflow activator in the Department of Lhoist Bukowa, Szkło i Ceramika No. 4/2009 (in Polish).
• [10] R. Klecan, W. Muras, R. Wołoszyn, Ecological grinding activator used in manufacturing of dolomitic fillers in the Department "Piotrowice", Szkło i Ceramika nr 4/2010 (in Polish).