Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The paper presents a method for the preparation of sulfonated polysulfone in order to receive a matrix to immobilisation of biomolecules. Optimum conditions of the synthesis are described. The phase inversion method was used to prepare a sulfonated polysulfone membrane and then urease was immobilized on the surface of the prepared matrix. Comparison of activity of native urease and the immobilized urease is presented.
Wydawca
Czasopismo
Rocznik
Tom
Strony
77--86
Opis fizyczny
Bibliogr. 18 poz., tab., wykr.
Twórcy
autor
autor
autor
autor
autor
autor
autor
- Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences, ul. Księcia Trojdena 4, 02-109 Warsaw, Poland, ewa.lukowska@ibib.waw.pl
Bibliografia
- [1] Nagese Y., Naruse A., Matsui K.: Chemical modification of polysulphone: 1. Synthesis of polysulphone/polydimethylsiloxane graft copolymer. Polymer. 1989, 30, 1931-1937.
- [2] Nagese Y., Naruse A., Matsui K.: Chemical modification of polysulphone: 2. Gas and liquid permeability of polysulphone/polydimethylsiloxane graft copolymer membranes. Polymer. 1990, 31, 121-125.
- [3] Sheldon J.: The fine-structure of ultrafiltration membranes. I. Clean membranes. J. Membrane Sci. 1991, 62, 75-86.
- [4] Sheldon J. M., Reed I. M., Hawes C. R.: The fine-structure of ultrafiltration membranes. II. Protein fouled membranes. J. Membrane Sci. 1992, 74, 87-102.
- [5] Summers G. J., Ndawuni M. P., Summers C. A.: Dipyridyl functionalized polysulfones for membrane production. J. Membrane Sci. 2003, 226, 21-33.
- [6] Summers G. J., Ndawuni M. P., Summers C. A.: Chemical modification of polysulfone: anionic synthesis of dipyridyl functionalized polysulfone. Polymer. 2001, 42(2), 397-402.
- [7] Chen S-H., Liou R-M., Hsu C-S., Chang D-J., Yu K-C., Chang C-Y.: Pervaporation separation water/ethanol mixture through lithiated polysulfone membrane. J. Membrane Sci. 2001, 193(1),59-67.
- [8] Karlsson L. E., Jannasch P.: Polysulfone ionomers for proton-conducting fuel cell membranes 2. Sulfophenylated polysulfones and polyphenylsulfones. Electrochimica Acta. 2005, 50, 1939-1946.
- [9] Cozan V., Avram E.: Side chain thermotropic liquid crystalline polysulfone obtained from polysulfone udel by chemical modification. European Polymer Journal. 2003, 39(1), 107-114.
- [10] Arad-Yellin R., Firer M., Kahana N., Green B. S.: Functionalized polysulfone as a novel and useful carrier for immunization and antibody detection. Reactive and Functional Polymers 2003, 54(1-3), 5-16.
- [11] Avram E., Brebu M. A., Warshawsky A., Vasile C.: Polymers with pendent functional groups. V. Thermooxidative and thermal behavior of chloromethylated polysulfones. Polymer Degradation and Stability. 2000, 69(2), 175-181.
- [12] Möckel D., Staude E., Guiver M. D.: Static protein adsorption, ultrafiltration behavior and cleanability of hydrophilized polysulfone membranes. J. Membrane Sci. 1999, 158(1-2), 63-75.
- [13] Genova-Dimitrova P., Baradie B., Foscallo D., Poinsignon C., Sanchez J. Y.: Ionomeric membranes for proton exchange membrane fuel cell (PEMFC): sulfonated polysulfone associated with phosphatoantimonic acid. J. Membrane Sci. 2001, 185(1), 59-71.
- [14] Matsumoto Y., Sudoh M., Suzuki Y.: Preparation of composite UF membranes of sulfonated polysulfone coated on ceramics. J. Membrane Sci. 1999, 158(1-2), 55-62.
- [15] Zschocke P., Quellmalz D.: Novel ion exchange membranes based on an aromatic polyethersulfone. J. Membrane Sci. 1985, 22, 325-332.
- [16] Rucka M., Poźniak G., Turkiewicz B., Trochimczuk W.: Ultrafiltration membranes from polysulfone/aminated polysulfone blends with proteolytic activity. Enzyme and Microbial Technology 1996, 18(7), 477-481.
- [17] Guan R., Zou H., Lu D., Gong C. I., Liu Y.: Polyethersulfone sulfonated by chlorosulfonic acid and its membrane characteristics. European Polymer Journal 2005, 41, 1554-1560.
- [18] Poźniak G., Krajewska B., Trochimczuk W.: Urease immobilized on modified polysulfone membrane: preparation and properties. Biomaterials 1995, 16, 129-134.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ6-0002-0023