A method for calculation of curved beams

• Autorzy: Papacz W.
• Języki publikacji: EN

Abstrakty

EN

In this paper, results of theoretical considerations of calculations of crooked beams are presented. Analytic relations between displacements of the beam axis, deformations of the beam, area of transversal section and Young's modulus and external loads are used for calculation of beams of any curvature. The equations derived herein can be used for calculation of large displacements of beams of any curvature, also for composite leaf springs.

Słowa kluczowe

EN

composite; leaf springs; strength of crooked beams

PL

kompozyty; krzywa belka

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2012
• Tom: Vol. 17, no. 1
• Strony: 271--278
• Opis fizyczny: Bibliogr. 4 poz., wykr.

Twórcy

autor

Papacz W.

• University of Zielona Góra Faculty of Mechanical Engineering Department of Vehicle Design Licealna 9, 65-417 Zielona Góra, POLAND,

Bibliografia

• Bjorklung A. (1956): Beitrag zur theorie der elastischen Ringe mit berucksichtigung der Wolbverhinderung. - Ing. Arch., vol.23.
• Papacz W. (2009): Some parameters of composite leaf springs. - Int. J. Applied Mechanics and Engineering, vol.14, pp.1181-1187.
• Rakowski G. and Solecki R. (1956): Crooked rods. - Arkady, Warsaw.
• Romanów F., Maćkiewicz J. and Papacz W. (1998): Composite leaf springs. - The Works of Mechanical Department, T.U. Zielona Góra, pp.113-121.