PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
  • Sesja wygasła!
Tytuł artykułu

Application of the strain energy to estimate the rock load in non-squeezing ground condition

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Zastosowanie energii odkształceń do estymacji obciążenia górotworu w warunkach braku osiadania gruntu
Języki publikacji
EN
Abstrakty
EN
Estimation of rock load is very important issue because the selection of support system is highly related to this parameter. Several methods are used to estimate this parameter such as experimental, empirical and numerical methods. In this study, a new empirical method is proposed to estimate the rock load based on the ration of the residual strain energy of post failure to the stored strain energy of pre failure. Also a statistical analysis is performed through collected actual data from five tunnels in non squeezing condition. The result showed that there is a direct relationship between both parameters and the good correlation between both parameters is achieved by using of power equation to estimate of rock load in non squeezing condition.
PL
Określenie obciążenia górotworu jest niezwykle ważnym zagadnieniem gdyż warunkuje dobór odpowiedniej obudowy. Istnieje wiele metod określania tego parametru: metody eksperymentalne, empiryczne oraz numeryczne. W pracy tej zaproponowano nową empiryczną metodę prognozowania obciążenia górotworu na podstawie określenia szczątkowej energii odkształceń w warunkach po zniszczeniu w stosunku do zgromadzonej energii odkształcenia przed zniszczeniem. Przeprowadzono analizę statystyczną danych zebranych w pięciu tunelach w warunkach braku osiadania. Wyniki analizy wskazują, że istnieje bezpośredni związek pomiędzy obydwoma parametrami. Dobra korelację pomiędzy dwom parametrami uzyskać można poprzez zastosowanie funkcji potęgowej do określenia obciążeń górotworu w warunkach braku osiadania.
Rocznik
Strony
551--566
Opis fizyczny
Bibliogr. 37 poz., rys., tab., wykr.
Twórcy
autor
Bibliografia
  • Alejano L.R., Alonso E., Rodriguez-Dono A., Fernandez-Manin G., 2009a. Application of the convergence-confinement method to tunnels in rock masses exhibiting Hoek-Brown strain-softening behavior. International Journal of Rock Mechanics & Mining Sciences. Elsevier Science, July.
  • Alejano L.R., Rodriguez-Dono A., Alonso E., Fdez-Manin G., 2009b. Ground reaction curves for tunnels excavated in different quality rock masses showing several types of post-failure Behavior. Tunnelling and Underground Space Technology . Elsevier Science, July, 689-705.
  • Barton N., Lien R., Lunde J., 1974. Engineering classificaion of rock masses for the design of tunnel support. NGI Publication No. 106, Oslo, 48.
  • Barton N., Lien R., Lunde J., 1975. Estimation of support requirements for underground excavations. XVIth Sym. On Rock Mechanics, University of Minnesota, Minneapolis, USA, 163-177.
  • Bhasin R., Grimstad E., 1996. The use of stress-strength relationships in the assessment of tunnel stability. Proc. Conf. on Recent Advances on Tunnelling Technology, New Delhi, 1, 183-196.
  • Bieniawski Z.T., 1984. Rock mechanics design in mining and tunnelling. A.A. Balkema, Rotterdam, 97-133.
  • Brady B.H.G., Brown E.T., 2005. Rock mechanics for underground mining. Chapter 10, Third edition, http://www.springeronline.com.
  • Brekke T.L., 1968. Blocky and seamy rock in tunnelling. Bull. Assoc. Eng. Geol., 5(1), 1-12.
  • Cai M., Kaiser P.K., Uno H., Tasaka Y., Minamic M., 2004. Estimation of rock mass deformation modulus and strength of jointed rock masses using the GSI system. Int. J. Rock Mech. Min. Sci., 41(1), 3-19.
  • Cai M., Kaiser P.K., Tasakab Y., Minamic M., 2007. Determination of residual strength parameters of jointed rock masses using the GSI system. Int. J. Rock Mech. Min. Sci., 44, 247-65.
  • Carranza-Torres C., Fairhurst C., 2000. Application of the convergence-confinement method of tunnel design to rock masses that satisfy the Hoek Brown failure criterion. Tunnelling and Underground Space Technology,15 (2), 187-213.
  • Cecil O.S., 1970. Correlation of rock bolts - shotcrete support and rock quality parameters in Scandinavian tunnels. PhD thesis, University of Illinois, Urbana, 414.
  • Deere D.U., Peck R.B., Parker H., Monsees J.E., Schmidt B., 1970. Design of tunnel support systems. High Res. Rec., 339, 26-33.
  • Egger P., 2000. Design and Construction Aspects of Deep Tunnels (with particular emphasis on strain softening rocks) published in Tunnels under Pressure, the proceedings of the AITES-ITA 2000 World Tunnel Congress.
  • Marinos P., Hoek E., 2000. GSI - A geologically friendly tool for rock mass strength estimation. Proc. GeoEng 2000 Conference, Melbourne.
  • Fraldi M., Guarracino F., 2010. Analytical solutions for collapse mechanisms in tunnels with arbitrary cross sections. International Journal of Solids and Structures. 216-223.
  • Goel R.K., Jethwa J.L., 1991. Prediction of support pressure using RMR classification. Proc. Indian Getech. Conf., Surat, India, 203-205.
  • Goel R.K., Jethwa J.L., Dhar B.B., 1996. Effect of tunnel size on support pressure. Technical Note. Int. J. Rock Mech. and Min. Sci. & Geomech. Abstr., Pergamon, 33(7), 749-755.
  • Hoek E., Brown E.T., 1997. Practical estimates of rock mass strength. Int. J. Rock Mech. Sci. Geom. Abstr. 34 (8), 1165-1187.
  • Hoek E., Carranza-Torres C., Corkum B., 2002. Hoek-Brown failure criterion - 2002 ed. In: Proceedings of the NARMSTAC 2002, Mining Innovation and Technology. Toronto, Canada, pp. 267-273.
  • Hoek E., Carranza-Torres C., Diederichs M.S., Corkum B., 2008. Kersten Lecture Integration of geotechnical and structural design in tunnelling. In: 56th Annual Geotechnical Engineering Conference. University of Minnesota.
  • Hoek E., Diederichs, M.S., 2006. Empirical estimates of rock mass modulus. Int. J. Rock Mech. Min. Sci., 43:203-15.
  • Jackson K., Kingman S.W., Whittles D.N., Lowndes I.S., Reddish D.J., 2008. The effect of strain rate on the breakage behavior of rock. Archives of Mining Sciences, Vol. 53, No 1, p. 3-22.
  • Reza R., Osgoui Erdal Ünal. 2009. An empirical method for design of grouted bolts in rock tunnels based on the Geological Strength Index (GSI). J. engineering Geology, 154-166.
  • RocScience, RocLab, 2002. Rocscience Inc., Toronto, Canada.
  • Rose D., 1982. Revising Terzaghi's tunnel rock load coefficients. Proc. 23rd U.S.Sym. Rock Mech., AIME, New York, 953-960.
  • Sakurai S., Takeuchi K., 1983. Back analysis of measured displacements of tunnels. Rock Mechanics and Rock Engineering 16 (3), 173-180.
  • Sakurai S., 1997. Lessons learned from field measurements in tunnelling. Tunnelling and underground space technology, 12(4), 453-460.
  • Sakurai S., Akutagawa S., Takeuchi K., Shinji M., Shimizu N., 2003. Back-analysis for tunnel engineering as a modern observational method. Tunnelling and Underground Space Technology. 18 (2-3), 185-196.
  • Singh B., Jethwa J.L., Dube A.K., 1995. A classification system for support pressure in tunnels and caverns. J. Rock Mech. & Tunnelling Technology, India, 1(1), January, 13-24.
  • Singh B., Jethwa J.L., Dube A.K., Singh M., 1992. Correlation between observed support pressure and rock mass quality. Int. J. Tunnelling & Underground Space Technology, Pergamon, 7(1), 59-74.
  • Singh M., Singh B., Choudhari J., 2007. Critical strain and squeezing of rock mass in tunnels. Tunnelling and Underground Space Technology. 343-350.
  • Sinha R.S., 1989. Underground structures - design and instrumentation. Elsevier Science, U.K., 480.
  • Terzaghi K., 1946. Rock defects and loads on tunnel support. Introduction to rock tunnelling with steel supports. Eds, R.V., Proctor and White, T.L., Commercial Sheering & Stamping Co., Youngstown, Ohio, U.S.A., 271.
  • Unal E., 1983. Design guidelines and roof control standards for coal mine roofs. PhD thesis, Pennsylvania State University, University Park, 355.
  • Verman M.K., 1993. Rock mass - tunnel support interaction analysis. PhD thesis, IIT Roorkee, Roorkee, India, 258.
  • Szwedzicki T., 2008. Precursors to rock mass failure in underground mines. Archives of Mining Sciences, Vol. 53, No 3, p. 449-465.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ5-0021-0040
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.