Experimental study on ultimate strength of CK20 steel cylindrical panels subjected to compressive axial load

• Autorzy: Shariati M. , Sedighi M. , Saemi J. , Eipakchi H. R. , Allahbakhsh H. R.

Warianty tytułu

PL

Eksperymentalne badania wytrzymałości elementów cylindrycznych wykonanych ze stali CK20 poddanych osiowemu ściskaniu

• Języki publikacji: EN

Abstrakty

EN

In this paper, the effects of the length, sector angle and boundary conditions on the buckling load and postbuckling behaviour of cylindrical panels have been studied, experimentally. The compressive axial load has been applied on the panels using servo-hydraulic machine and different boundary conditions have been prepared by suitable fixtures. The presented results can be used in designing of these structures.

PL

W pracy przedstawiono eksperymentalne wyniki wpływu długości i kąta sektora próbek oraz warunków brzegowych na siłę wyboczenia oraz ich zachowanie się po wyboczeniu. Badania przeprowadzono na maszynie hydraulicznej, gdzie za pomocą odpowiednich uchwytów uzyskano różne warunki brzegowe. Przedstawione wyniki mogą być wykorzystane w projektowaniu struktur cylindrycznych.

Słowa kluczowe

EN

buckling; post-buckling; cylindrical panels; experimental test

PL

wyboczenia; panel cylindryczny; badania eksperymentalne

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2010
• Tom: Vol. 10, no 2
• Strony: 117--130
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr.

Twórcy

autor

Shariati M.

autor

Sedighi M.

autor

Saemi J.

autor

Eipakchi H. R.

autor

Allahbakhsh H. R.

• Mechanical Engineering Faculty, Shahrood University of Technology, Shahrood, P.O. Box 316, I.R., Iran

Bibliografia

• [1] Ugural A.C.: Stresses in plates and shells, New York, McGraw-Hill, 1981.
• [2] Timoshenko S.P., Gere J.M.: Theory of elastic stability, New York, McGraw-Hill, 1961.
• [3] Lekhnitskii S.G.: Anisotropic plates, Gordon and Breach, New York, 1968.
• [4] Magnucki K., Mackiewicz M.: Elastic buckling of an axially compressed cylindrical panel with three edges simply supported and one edge free, Thin-Walled Structures, 2006, Vol. 44, No. 4, pp. 387–392.
• [5] Patel S.N., Datta P.K., Sheikh A.H.: Buckling and dynamic instability analysis of stiffened shell panels, Thin-Walled Structures, 2006, Vol. 44, No. 3, pp. 321–333.
• [6] Jiang L., Wang Y., Wang X.: Buckling analysis of stiffened circular cylindrical panels using differential quadrature element method, Thin-Walled Structures, 2008, Vol. 46, No. 3, pp. 390–398.
• [7] Young B.: Experimental and numerical investigation of high strength stainless steel structures, Journal of Constructional Steel Research, 2008, Vol. 64, No. 11, pp. 1225–1230.
• [8] Zhu J., Young B.: Numerical investigation and design of aluminium alloy circular hollow section columns, Thin-Walled Structures, 2008, Vol. 46, No. 12, pp. 1437–1449.
• [9] Zhu J.H., Young B.: Experimental investigation of aluminium alloy circular hollow section columns, Engineering Structures, 2006, Vol. 28, No. 5, pp. 207–215.
• [10] Liu Y., Young B.: Buckling of stainless steel square hollow section compression members, Journal of Constructional Steel Research, 2003, Vol. 59, No. 2, pp. 165–177.
• [11] Zhang H., Motipalli J., Lam Y.C., Baker A.: Experimental and finite element analyses on the post-buckling behaviour of repaired composite panels. Composites Part A, 1998, Vol. 29, No. 11, pp. 1463–1471.
• [12] Lanzi L.: An experimental investigation on the post-buckling behaviour of composite stiffened panels, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics &Materials Conference, California, 2004.
• [13] ASTM A370-05, Standard test methods and definitions for mechanical testing of steel products.
• [14] Gerard, George and Becker, Herbert: Handbook of structural stability. Part 3: buckling of curved plates and shells, NACA TN 3783, 1957.