Trajectory tracking problem for a redundantly actuated walking robot

• Autorzy: Lipiński K.
• Języki publikacji: EN

Abstrakty

EN

In the paper, dynamics of the waking robots is considered. The robots under consideration are variable degrees of freedom systems. As in any variable degrees of freedom systems, in some of the configurations, the number of actuators exceeds the number of the system degrees of freedom. Thus alternative joint actuations can lead to the same motion of the robot. Such configuration is tested in the paper. In the redundantly actuated case, the traditional kinematics and dynamics cannot be applied directly. Different actuation strategies are tested on an exemplary test system. The main focus is set on the multibody model and on symmetrical/asymmetrical actuation strategy.

Słowa kluczowe

EN

walking robot; multibody dynamics; closed loop system; redundant actuation; trajectory tracking

PL

dynamika układów wieloczłonowych; śledzenie trajektorii

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2010
• Tom: Vol. 15, no 3
• Strony: 743--752
• Opis fizyczny: Bibliogr. 21 poz., rys., wykr.

Twórcy

autor

Lipiński K.

• Mechanical Department Gdańsk University of Technology ul. Narutowicza 11/12, 80-233 Gdańsk, POLAND,

Bibliografia

• Dasgupta B. and Mruthyunjaya T.S. (1998): Force redundancy in parallel manipulators: Theoretical and practical issues. – Mech. Mach Theory, vol.33.
• Ebrahimi I., Carretero J.A. and Boudreau R. (2007): 3-PRRR redundant planar manipulator: Inverse displacement, workspace and singularity analyses. – Mech. Mach. Theory, vol.42.
• Fisette P., Lipinski K. and Samin J.C. (1999): Symbolic modelling for the simulation, control and optimisation of multibody systems. - In: Advances in multibody systems and mechatronics. Contributions dedicated to Prof. Manfred Hiller on the occasion of his sixtieth birthday. Ed. A. Kecskemethy, M. Schneider, C. Woernle. Graz: Inst. f. Mech. u. Getriebelehre Tech. Univ. Graz 1999 pp.139-174.
• Fisette P. and Samin J.C. (2003): Symbolic Modeling of Multibody System. – Kluwer Acad. Pub.
• Ganovski L., Fisette P. and Samin, J.C. (2004): Piecewise overactuation of parallel mechanisms following singular trajectories: Modeling, simulation and control. – Multibody Sys. Dyn., vol.12.
• Garcia E., Galvez J.A. and Gonzalez de Santos P. (2003): On finding the relevant dynamics for model-based controlling walking robots. – Journal of Intelligent and Robotic Sys. vol.37.
• Garg V., Nokleby S.B. and Carretero J.A. (2009): Wrench capability analysis of redundantly actuated Spatial prallel manipulators. – Mech. Mach. Theory, vol.44.
• Kim H.W., Lee J.H., Suh I-H. and Yi B-J. (2005): Comparative study and experimental verification of singular-free algorithms for a 6 DOF parallel haptic device. – Mechatronics, vol.15.
• Krishchenko A.P., Tkachev S.B. and Fetisov D.A. (2007): Planar walking control for a five-link biped robot. – Computational Mathematics and Modeling, vol.18, No.2.
• Lee J.H., Yi B-J., Oh S-R. and Suh I-H. (2001): Optimal Design and Development of a Five-bar Finger with Redundant Actuation. – Mechatronics, vol.11.
• Lipiński K. (2009): A strategy of minimal torque modifications in a question of actuation strategy for an over-actuated system of a planar walking robot – W: XIX International Symposium Research-Education-Technology', Bremen (Germany).
• Müller A. and Maisser P. (2007): Generation and application of prestress in redundantly full-actuated parallel manipulator. – Multibody Sys. Dyn., vol.18.
• Sabourin C. and Bruneau O. (2005): Robustness of the dynamic walk of a biped robot subjected to disturbing external forces by using CMAC neural networks. – Robotics and Auton. Systems, vol.51.
• Schiehlen W. (2005): Energy-Optimal design of walking machines. – Multibody System Dynamics, vol.13.
• Vukobratovic M., Potkonjak V., Babkovic K. and Borovac B. (2007): Simulation model of general human and humanoid motion. – Multibody Syst. Dyn., vol.17.
• Wu J., Wang J., Li T. and Wang L. (2007): Performance analysis and application of a redundantly actuated parallel manipulator for milling. – J. Intell. Robot Syst., vol.50.
• Wu J., Wang J., Wang L., and Li T. (2009): Dynamics and control of a planar 3-DOF manipulator with actuation redundancy. – Mech. Mach Theory, vol.44
• Yi B-J., Oh S-R. and Suh I-H. (1999): Five-bar finger mechanism involving redundant actuators: analysis and its applications. – IEEE Trans. Rob. Autom., vol.15.
• Zaho Y. and Gao F. (2009): Dynamic performance of the 8PSS redundant parallel manipulator and its non-redundant counterpart - the 6PSS parallel manipulator. – Mech. Mach. Theory, vol.44.
• Zhao Y.S., Lu L., Zhao T.S., Du Y.H. and Huang Z. (2000): Dynamic performance analysis of six legged waking machines. – Mech. Mach Theory, vol.35.
• Zheng Y.F. and Luh J.Y.S. (1988): Optimal Load Distribution for two industrial robots handling a single object. – Proceedings of the 1988 IEEE International Conference on Robotics and Automation.