Welding plugs on gas pipes at accelerated heat offtake under laboratory condition

• Autorzy: Pallo P. , Mician M. , Varga M.
• Języki publikacji: EN

Abstrakty

EN

This article deals with the design of a constructional solution for measuring thermal cycles at accelerated heat offtake from the weld area. The designed model gives appropriate conditions for real weld evaluation on gas pipes. It enables evaluation of the welds not only by non-destructive test methods, but for example also by microscopic, macroscopic and others destructive test methods.

Słowa kluczowe

EN

S355JR; gas pipes; industrial plug; thermocouple

PL

rury gazowe; termoelement

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2010
• Tom: Vol. 15, no 2
• Strony: 545--550
• Opis fizyczny: Bibliogr. 5 poz., rys., wykr.

Twórcy

autor

Pallo P.

autor

Mician M.

autor

Varga M.

• University of Žilina, Faculty of Mechanical Engineering Department of Technological Engineering Univerzitná 1, 010 26 Žilina, SLOVAKIA,

Bibliografia

• Leždík V., Mičian M., Škybraha J. and Bohinský J. (2006): ): Development of welding procedures for metallic materials. - first edition, Institute of Quality and Education, Žilina
• Nguyen N.T. (2004): Thermal Analysis of Welds. – Southampton, UK: WIT, 334 s.
• Orlowicz A.W. and Trytek A. (2002): Solidification structure gtaw - treated iron castings. – Archives of Foundry, vol.2, No.4 Archiwum Odlewnictwa, Rocznik 2, Nr 4 PAN – Katowice PL (ISSN 1642-5308).
• Sládek A., Mičian M., Meško J., Žmindák M., Dekýš V. and Flašíková A. (2009): Analyse of the overall state of stress and determine the total life of welded joints in welding fittings and plugs of high-pipe operating conditions. – Report from the solution phase, vol.3, Žilina.
• Žmindák M., Novák P. and Meško J. (2010): Numerical simulation of arc welding processes with metallurgical transformations. – Metalurgija 49, vol.2, pp.595-599. (ISSN 0543-5846).