The influence of an effective friction angle on the velocity of material of group III, leaving the impact plate

• Autorzy: Cyganiuk J. A. , Kuryło P. , Tertel E.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the analysis of the influence of an effective friction angle on the velocity of a cement-type material of group III, leaving the flat plate of the pouring point. The analysis was carried out for oversized cement particles, with grain diameters classifying them as a material of group III. The analysis was carried out in the real conditions of cement production and for the impact plate mounted in the impact flowmeter GRAN 30. The effective friction angle of the oversized cement particles type CEMII A-V 42,5 R was considered to be the reference value. The velocity values were determined theoretically with the use of a mathematical model of the flow of a stream of bulk material in an impact point with a flat impact plate.

Słowa kluczowe

EN

effective friction angle; impact plate; fine materials

PL

kąt tarcia efektywny; materiały wysokiej jakości

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2009
• Tom: Vol. 14, no 4
• Strony: 929--939
• Opis fizyczny: Bibliogr. 5 poz., rys., tab., wykr.

Twórcy

autor

Cyganiuk J. A.

autor

Kuryło P.

autor

Tertel E.

• University of Zielona Góra, Faculty of Mechanical Engineering Institute of Mechanical Engineering and Machine Operation ul. Szafrana 4, 65-516 Zielona Góra, POLAND,

Bibliografia

• Cyganiuk J.A. (2006): Modelling of the stationary flow of bulk material streams in pouring points of conveyor transport system. - PhD Thesis, Report series PRE, No.8/06, Wrocław University of Technology, Wrocław.
• Cyganiuk J. (2007a): Modelling of flow of bulk material of group III in an impact pouring point with a flat impact plate. - Systems: Journal of Transdisciplinary Systems Science, vol.12, No.3.
• Cyganiuk J. and Przystupa F.W. (2007b): Modelling of flow of bulk material of cement type in an impact point with a flat impact plate. - Open Cast Mining, No.3-4.
• Cyganiuk J. (2007c): Modelling of the flow of bulk materials in cooperating pouring points of conveyor transport systems. - Open Cast Mining, No.3-4.
• Szymków J. (2002): Influence of humidity on strength parameters of filtration deposits. - PhD Thesis, Report series PRE, No.013/2002, Wrocław University of Technology, Wrocław.