Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
This article covers the analysis of the pneumatic moulding sand reclamation, made of different types of binders. The research has been carried out for the sand with resin binder (furan resins) as well as water glass hardened with flodur. Reclamation has been carried in the pneumatic conveying system in the linear regenerator in the technical scale and equipped with an abrasion impact disc. Evaluation of the effectiveness of the reclamation has been made on the basis of tests determining the contents of binder's components before and after the process and on the basis of the sieve analysis. The subject of this publication is the comparison of the effectiveness of these two types of solutions.
Czasopismo
Rocznik
Tom
Strony
137--140
Opis fizyczny
Bibliogr. 5 poz., rys., tab.
Twórcy
autor
autor
autor
- Department of Foundry, Silesian University of Technology, 44-100 Gliwice, henryk.szlumczyk@polsl.pl
Bibliografia
- [1] H. Szlumczyk, Analiza ruchu strumienia dwufazowego w regeneratorze liniowym, Archiwum Odlewnictwa Nr 15, Rocznik 5 , Wyd. PAN Katowice 2005.
- [2] H. Szlumczyk, Badania procesu ścierania zużytego spoiwa z powierzchni ziaren osnowy w regeneratorze liniowym, Transport Pneumatyczny 2005, IX Międzynarodowa Konferencja, Sielpia - Kielce 2005.
- [3] H. Szlumczyk, J. Gawroński, Regenerator liniowy-nowoczesna technologia pneumatycznej regeneracji mas formierskich, Archiwum Odlewnictwa Nr 8, Wyd. PAN Katowice 2003.
- [4] J. A. Goliński, A. T. Troskolański: Strumienice, WNT Warszawa 1979.
- [5] J. Dańko, R. Dańko, Reclaimability of used seft setting Sand with selected type of resin, Archives of Foundry vol.4, No 13 (2004),45-50 (in Polish).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ4-0018-0030