The investigate of flow in direct extrusion process of heterogeneous materials flow

• Autorzy: Patejuk A. , Piwnik J. , Gabrylewska M.
• Języki publikacji: EN

Abstrakty

EN

The results of experimental investigations were introduced in range of verification of model investigations results (in utilization of supplementary materials) with results of investigations on real materials are presented in this work. To this aim the matrix became constructed with interchangeable little eye made possible extrusion process of real materials at three reduction ratio: [lambda] = 1,5 1,75 and 2,0. Analysis of heterogeneous materials flow process shows, that of principle onto extrusion process exerts kind as well as a way distribution of entrance creators' materials batch. However size of strength of stamp pressure is determined by reduction ratio in main measure.

Słowa kluczowe

EN

innovative materials and foundry technologies; extrusion; reduction; materials: Cu-Zn-Sn-Pb

PL

materiały innowacyjne; technologie odlewnicze; technologie innowacyjne; wytłaczanie

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2007
• Tom: Vol. 7, iss. 2
• Strony: 157--162
• Opis fizyczny: Bibliogr. 12 poz., rys., wykr.

Twórcy

autor

Patejuk A.

autor

Piwnik J.

autor

Gabrylewska M.

• The Cathedral of Materials Engineering and Mechanical Technology, Bialystok Technical University, Wiejska street 45 C, 15-351 Białystok,

Bibliografia

• [1] Chen C.P., Tsab C. Y.: Semi-solid of A356 Al. Alloys. Proceedings of the 4th International Conference on Semi-Solid Processing from Alloys and Composites, Sheffield (1996).
• [2] Erbel S., Kuczyński K., Marciniak Z.: Plastic working. PWN Warsaw: 1986 (in Polish).
• [3] Flemings M.C., Mehrabian R.: Casting semi-solid metals, AFS Trans., vol. 81 (1973).
• [4] Nguyen T. G., Favier D., Suery M.: Theoretical and experimental study of the isothermal mechanical behavior of alloys in the semi-solid state, Int. J. Plasticity, vol. 10 (1994).
• [5] Piwnik J.: Modelling of plastik flow processes. Published by Technical University in Bialystok. Bialystok 1992 (in Polish).
• [6] Plata M., Piwnik J.: Theoretical and experimental analysis of seam weld formation in hot extrusion of aluminium alloys. Report, Alusuisse Technology Center 2000.
• [7] Śliwa R.: Plastic strain of metal-matrix composites during extrusion. Science magazines of Technical University in Rzeszow Nr 95. Rzeszow 1992 (in Polish).
• [8] Patejuk A., Skorulski G. Piwnik J.: The influence of coastal conditions on kinematics of plastic flow in extruxtion proceses. XXI Symposium on Experimental Mechanics of Solid. Jachranka (2004) 385-390 (in Polish).
• [9] Piwnik J.: The mechanics of metal extrusion. Published by Technical University in Bialystok. Bialystok 1991 (in Polish).
• [10] Piwnik J., Plata M.: The application of the flow function method to predict the normal stress distribution at the die - aluminium interface for large diameter (570 mm) tube extrusion problems. Report, Alusuisse Technology Center 1996.
• [11] Piwnik J., Patejuk A.: Criterion of Transversal Welding in Hot Extrusion of Aluminium Alloys. Archives of Fundry. Vol. 6. № 18 (2006) 155-160.
• [12] Patejuk A, Piwnik J.: Energetic Criterion of Longitudinal Welding in Hot Extrusion of Aluminium Alloys. Archives of Foundry. Vol. 6. № 18 (2006) 161-166.