Selection of material for cores hardened with carbon dioxide

• Autorzy: Soiński M. S. , Chmielarz P.
• Języki publikacji: EN

Abstrakty

EN

The work presents the investigation results concerning the bending and the tensile strength of specimens made of various types of core sands. The investigated core sands for bending tests have been prepared of silica sand from Nowogród Dobrzański and, alternatively, of H33 German sand, both containing a variety of binders, namely Carbophen 5692, Carbophen 7170, Carbophen 8178, Novatec 1000, or SuperEko 2000 phenolic resins, as well as water glass. The tensile strength has been investigated for specimens made of silica sand from Nowogród Dobrzański and the sand supplied by Hüttenes-Albertus Polska, both types bond with Carbophen 5692, Novatec 1000, or SuperEko 2000 resins. All specimens have been tested immediately after the CO2 hardening process, then after 1 hour and after 24 hours. It has been found that the type of sand grains significantly affects both the bending and the tensile strength. Furthermore, for each type of sand the best bending strength has been achieved for Carbophen 7170, Carbophen 8178, and Novatec 1000 resins, whereas the best tensile strength has been offered by specimens bond with Carbophen 5692 resin.

Słowa kluczowe

EN

casting technologies; resin-bond CO2-hardened sands; moulding sands; water glass; technological properties

PL

technologie odlewnicze; masa formierska

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2007
• Tom: Vol. 7, iss. 2
• Strony: 107--110
• Opis fizyczny: Bibliogr. 16 poz., rys., tab.

Twórcy

autor

Soiński M. S.

autor

Chmielarz P.

• Katedra Odlewnictwa, Politechnika Częstochowska, Al. Armii Krajowej 19, 42-200 Częstochowa,

Bibliografia

• [1] St. M. Dobosz, Moulding sands with water glass with increased knock-out properties, Archives of Foundry vol. 4, No 11 (2004) 108-113 (in Polish).
• [2] M. Łucarz, Analysis of sands quality with resin binders prepared on reclaimed sand subjected to multicyclic thermal treatment, Archives of Foundry vol. 4, No 11 (2004) 306-311 (in Polish).
• [3] F. Pezarski, I. Izdebska-Szanda, Z. Maniowski, M. Pasternak: Technical aspects of reclamation of the waste CO2 hardened core sands, Archives of Foundry vol. 6, No 18 (2006) 423-428 (in Polish).
• [4] E. Smoluchowska, F. Pezarski, I. Izdebska-Szanda, Z. Maniowski, The waste cores influence on technological properties of sands with bentonite binder, Archives of Foundry vol. 4, No 11 (2004) 172-177 (in Polish).
• [5] K. Major-Gabryś, St. M. Dobosz, J. Zych, Criteria of estimating the knock-out properties of moulding sands with water glass, Archives of Foundry vol. 5, No 17 (2005) 163-168 (in Polish).
• [6] J. Dańko, R. Dańko, Low temperature reclamation treatment of water-glass bonded sands, Archives of Foundry vol. 4, No 11 (2004) 102-107 (in Polish).
• [7] J. Zych, New non-destructive method of quality inspection of mould's elements made of moulding sand with chemical binders, Archives of Foundry vol. 2, No 5 (2002) 132-139 (in Polish).
• [8] J. L. Lewandowski, Materials for moulds, Publishing House "Akapit", Cracow (1997) (in Polish).
• [9] I. Izdebska-Szanda, F. Pezarski, J. Morek, Optimization of methods to prepare moulding specimens and experience from industrial application of shooter LUT-c by cold-box process, Archives of Foundry vol. 4, No 11 (2004) 194-199 (in Polish).
• [10] J. Dańko, J. Zych, R. Dańko, A. Sroczyński, Testing of core sand density distribution in cores manufactured by means of core shooting techniques, Archives of Foundry vol. 6, No 22 (2006) 133-138 (in Polish).
• [11] J. Dańko, J. Zych, R. Dańko, Ł. Jamrozowicz, Evaluation of hardening intensity and binder migration in cores prepared by means of shooting core sands based on reclaimed sand base, Archives of Foundry vol. 6, No 22 (2006) 139-144 (in Polish).
• [12] Hüttenes-Albertus Poland, Catalog. Selected core, moulding and auxiliary materials, HA, Lublin (2005) (in Polish).
• [13] Ashland-Südchemic-Kernfest, Catalog of moulding and auxiliary materials (2005) (in Polish).
• [14]SuperEko 2000, Alkaline phenolic resins: instruction for use [ZN 96/2] (2006) (in Polish).
• [15] Vitrosilicon S.A., Product characteristic, R-145 sodium liquid glass operation sheet (2005) (in Polish).
• [16] W. Volk, Applied statistics for engineers, WNT, Warsaw (1973) (in Polish).