The change of NiCrBSi alloys' phase composition after plasma spraying

• Autorzy: Dudek A.
• Języki publikacji: EN

Abstrakty

EN

Material for investigations was NiCrBSi powder for components' coatings which improve their corrosion resistance as well as resistance to friction wear and erosion. Plasma spraying method was used to produce a coating with thickness of 300 [mikro]m on low-alloy steel which was then remelted with the base material. Using X-ray quality analysis, phase composition was determined for: NiCrBSi powder, obtained coating and the alloyed surface layer. Crystallinity degree was also calculated for NiCrBSi layer sprayed on the base material.

Słowa kluczowe

EN

theory of crystallization; solidification process; crystallinity degree

PL

teoria krystalizacji; krzepnięcie; stopień krystalizacji

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2008
• Tom: Vol. 8, iss. 3s
• Strony: 17--20
• Opis fizyczny: Bibliogr. 17 poz., rys., tab., wykr.

Twórcy

autor

Dudek A.

• Czestochowa University of Technology, Institute of Materials Engineering, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland,

Bibliografia

• [1] L.A. Dobrzański: Podstawy nauki o materiałach i metaloznawstwo (Fundamentals of Material Science and Metallography), WNT, Warsaw, 2002.
• [2] A. Dudek, Z.Nitkiewicz: The arc plasma shape in the structural changes aspect after remelting process, Archives of Foundry 21,(2006), 199-206.
• [3] W. Ptak, A. Tabor: Effect of primary remelting of cast iron on the quality of repair welds and casting welds, Archives of Foundry, 21,(2006), 213.
• [4] M.S. Węglowski, M. Kępińska, Z. Mikno: Arc light emission in TIG welding, 21, Archives of Foundry, (2006), 243-248.
• [5] B. Wunderlich: Macromolecular Physic, 2, Academic Press, New York, (1973).
• [6] J. Szajnar, P. Wróbek, T. Wróbel: TIG sufacing-method of repair chromium cast with casting defects, Archives of Foundry, 6, (2006), 390-396.
• [7] T. Burakowski, T. Wierzchoń: Inżynieria powierzchni metali. WNT, Warszawa, 1995.
• [8] A. Dudek, Z. Nitkiewicz: The structure properties of surface layers which were obtained by alloying process, Acta Metallurgia Slovaca, 8, 2002, s. 339-343.
• [9] A. Dudek, Z. Nitkiewicz: Diagnostics of plasma arc during the process of remelting of surface layer in 40Cr4 steel. Archives of Materials Science and Engineering, 2007, Vol. 28, 369-372.
• [10] Qian Ming, L.C. Lim, Z.D. Chen: Laser cladding of nickel-based hardfacing alloys, Surf. Coat. Technol., 106, (1998), 174–182.
• [11] Conde, F. Zubiri, J. Damborenea: Cladding of Ni–Cr–B–Si coatings with a high power diode laser, Mater. Sci. Eng. A 334, (1–2), (2002), 233–238.
• [12] J. Rodrıguez, A. Mart´ın, R. Fernandez, J.E. Fernandez: An experimental study of the wear performance of NiCrBSi thermal spray coatings, Wear, 255, (2003), 950–955.
• [13] R.L. Sun, D.Z. Yang, L.X. Guo, S.L. Dong: Microstructure and wear resistance of NiCrBSi laser clad layer on titanium alloy substrate, Surf. Coat. Technol., 132, (2000), 251–255.
• [14] H. Kim, S. Hwang, C. Lee, P. Juvanon: Assesment of wear performance of flame sprayed and fused Ni-based coatings, Surf. Coat. Technol., 172, (2003), 262–269.
• [15] L.C. Lim, Q. Ming, Z.D. Chen: Microstructures of laser-clad nickel-based hardfacing alloys, Surf. Coat. Technol., 106, (1998), 183–192.
• [16] Q. Li, D. Zhang, T. Lei, C. Chen, W. Chen: Comparison of laser-clad and furnace-melted Ni-based alloy microstructures, Surf. Coat. Technol., 137, (2001), 122–135.
• [17] Conde, F. Zubiri, J. de Damborenea: Cladding of NiCrBSi coatings with a high power diode laser, Mater. Sci. Eng. A, 334, (2002), 233–238.