Mechanical properties of investment casting moulds reinforced with ceramic fibre

• Autorzy: Nadolski M. , Konopka Z. , Łągiewka M. , Zyska A.
• Języki publikacji: EN

Abstrakty

EN

This work deals with mechanical properties of thin-walled ceramic moulds for investment casting at the dewaxing stage. The main purpose of this work has been increasing their bending strength, expressed by the modulus of rupture (MOR), and determining their corresponding work of fracture, characterised by the fracture index (FI). An essence of the concept is applying aluminosilicate materials in the fibrous form along with grain silica materials as the reinforcing material for the thin-walled mould matrix.

Słowa kluczowe

EN

investment casting; ceramic mould; modulus of rupture

PL

odlewnia; forma ceramiczna; wytrzymałość na zginanie

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2008
• Tom: Vol. 8, iss. 4
• Strony: 149--152
• Opis fizyczny: Bibliogr. 10 poz., rys., tab.

Twórcy

autor

Nadolski M.

autor

Konopka Z.

autor

Łągiewka M.

autor

Zyska A.

• Technical University of Częstochowa, Department of Foundry, ul. Armii Krajowej 19, 42-200 Częstochowa, Poland,

Bibliografia

• [1] R. Haratym, J. Tomasik, The influence of ceramic mould quality on surface geometry of all investment castings, Archives of Foundry, 18 (2006) 267-272.
• [2] R. Haratym, The analysis of dimension deviations of ceramic moulds arsing during solidification and cooling of investment casting, Archives of Foundry, 14 (2004) 163-168.
• [3] R. Haratym, Dimensional accuracy of castings made by replicast CS method, Archives of Foundry, 9 (2003) 183-188.
• [4] M. Horacek, Accuracy of investment castings, Archives of Foundry, 15 (2005) 121-137.
• [5] M. Bijvoet, Practical ceramic shell slurry preparation and control, 25th BICTA Conference on Investment Casting (2001).
• [6] M. J. Hendricks, The effect of seal dips on ceramic shell properties and performance, 50th Technical Conference & Expo (2002).
• [7] Z. Piłkowski, M. Nadolski, Some strength problems of shell molds for investments casting, Archives of Foundry, 14 (2004) 413-419.
• [8] M. Nadolski, Investigation of mechanical properties of shell molds for investment casting, Archives of Foundry, 18 (2006) 261-266.
• [9] Z. Piłkowski, Deflection curves and fracture index in examination of shell materials, Archives of Foundry, 15 (2005) 328-333.
• [10] R Haratym, A. Karwiński The influence of some technological process parameters on strength of bending and permeability of ceramics moulds in investment casting, Acta Metallurgica Slovaca, 8 (2002) 395-399.