Multi-layers castings

• Autorzy: Szajnar J. , Wróbel P. , Wróbel T.
• Języki publikacji: EN

Abstrakty

EN

In paper is presented the possibility of making of multi-layers cast steel castings in result of connection of casting and welding coating technologies. First layer was composite surface layer on the basis of Fe-Cr-C alloy, which was put directly in founding process of cast carbon steel 200-450 with use of preparation of mould cavity method. Second layer were padding welds, which were put with use of TIG - Tungsten Inert Gas surfacing by welding technology with filler on Ni matrix, Ni and Co matrix with wolfram carbides WC and on the basis on Fe-Cr-C alloy, which has the same chemical composition with alloy, which was used for making of composite surface layer. Usability for industrial applications of surface layers of castings were estimated by criterion of hardness and abrasive wear resistance of type metal-mineral.

Słowa kluczowe

EN

cast steel; composite surface layer; padding weld; Tungsten Inert Gas; TIG

PL

staliwo; napoina; kompozytowa warstwa powierzchniowa

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1
• Strony: 181--186
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Szajnar J.

autor

Wróbel P.

autor

Wróbel T.

• Silesian University of Technology, Foundry Department, Towarowa 7, 44-100 Gliwice,

Bibliografia

• [1] J. Gawroński, J. Szajnar, P. Wróbel, Surface composite layers cast iron – ceramics particles, Archives of Foundry, vol. 5, No. 17 (2005) (in Polish).
• [2] J. Gawroński, J. Szajnar, P. Wróbel, Technology of surface composite layers on castings, Archives of Foundry, vol. 6, No. 19 (2006) (in Polish).
• [3] J. Szajnar, P. Wróbel, T. Wróbel: Model castings with composite surface layer - application, Archives of Foundry Engineering, vol. 8, No. 3 (2008).
• [4] A. Klimpel: Surfacing by welding and thermal spraying – technology WNT, Warszawa (2000), (in Polish).
• [5] J. Pilarczyk, J. Pilarczyk: Welding of metals, Silesian Publishers, Katowice (1996), (in Polish).
• [6] W. Orłowicz, A. Trytek: Shaping of microstructure and service properties of cast iron castings by surface refinement with electric arc plasma, Archives of Foundry, vol. 7, No. 23 – Monograph (2007), (in Polish).
• [7] J. Szajnar, P. Wróbel, T. Wróbel: Methods of improvement in hardness of composite surface layer on cast steel, Archives of Foundry Engineering, vol. 8, Special Issue 3 (2008).
• [8] Standard ASTM G 65–00.
• [9] K. Sękowski, J. Piaskowski, Z. Wojtowicz: Atlas of structures of pouring alloys, WNT, Warszawa (1972).