Influence of pouring temperature on a thermal gradient

• Autorzy: Suchoń J. , Cholewa M.
• Języki publikacji: EN

Abstrakty

EN

In the thesis there are presented results of computer simulation of casting solidification process, characteristics of solidification rate in several points as well as course of gradient change between these points. Based on the obtained results, an influence of initial conditions on temperature gradient during the solidification process was determined.

Słowa kluczowe

EN

solidification; thermal derivative analysis; gradient analysis

PL

odlewanie; krzepnięcie; termoanaliza; symulacja komputerowa krzepnięcia

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1
• Strony: 167--174
• Opis fizyczny: Bibliogr. 5 poz., wykr.

Twórcy

autor

Suchoń J.

autor

Cholewa M.

• Foundry Department, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland,

Bibliografia

• [1] Cholewa M.: Archives of Foundry, Concept of casting properties forecasting based on molti-point temperature measurement in casting-mould system, vol. 22, 2006, p. 111.
• [2] Cholewa M.: Introduction to component selection for cast composites, Innovation in Casting Industry, część I, Wydaw. Inst. Odl. Kraków, 2007, p. 169 (in Polish).
• [3] Cholewa M., Kondracki M.: Archives of Foundry Engineering, analysis of structural properties for AlSi11 alloy with use of thermal derivative gradient analysis TDGA, vol. 8/3, 2008 p.84.
• [4] Studnicki A.: The temperature gradient on section of casting in process of primary crystallization of chromium cast iron, Archives of Foundry Engineering, Vol.8, Spec. Issue 3/2008, 149-153.
• [5] J. Suchoń, M. Cholewa, M. Kondracki: Thermal gradient analysis of solidifying casting, Archives of Foundry Engineering Vol. 8, Special Issue 3/2008, 107-110.