Possibilities of rationalization of the melting process proceeding in .... 700 cupola

• Autorzy: Soiński M. S. , Derda A. , Skoczylas A. , Zatoń B. , Mierzwa P.
• Języki publikacji: EN

Abstrakty

EN

An attempt of rationalization of the cast iron melting process proceeding in a cupola has been taken on, based on the working parameters recorded during the first several hours of the cupola work. Examinations have been centred around the melting process taking place in a ... 700 hot-blast cupola with a fixed receiver (forehearth). It has been found that a significant reduction in coke consumption is possible due to changes in cupola burdening without a detriment to furnace efficiency or the temperature of molten cast iron.

Słowa kluczowe

EN

cupola; coke consumption; cupola efficiency

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1
• Strony: 153--156
• Opis fizyczny: Bibliogr. 8 poz., fot., rys., tab.

Twórcy

autor

Soiński M. S.

autor

Derda A.

autor

Skoczylas A.

autor

Zatoń B.

autor

Mierzwa P.

• Department of Foundry, Technical University of Częstochowa, ul. Armii Krajowej 19, 42-200 Częstochowa, Poland,

Bibliografia

• [1] The Sorelmetal Book of Ductile Iron, Metals & Minerals Sp. z o.o., Warsaw (2006) (in Polish).
• [2] Ductile iron, Part I, Production, Metals & Minerals Sp. z o. o., Warsaw (2000) (in Polish).
• [3] M. S. Soiński, Outline of trends in application of various types of furnaces for cast iron production, Production and Management in Metallurgy, Ed. TU of Częstochowa, Częstochowa, (2008) 135-140 (in Polish).
• [4] M. S. Soiński, A cupola or an electric furnace? A trial of comparison between the two devices for cast iron melting, Proceedings of the 13th Scientific-Technical Conference “Production and Management in Metallurgy”, part 1, Ed. TU of Częstochowa, Częstochowa (2005) 111-114 (in Polish).
• [5] M. S. Soiński, P. Mierzwa, M. Wilk, Rationalization of the cupola furnace. Proceedings of the 6th International Scientific Conference “New Technologies and Advances in Metallurgy and Material Science”, vol. 1 (2005) 142-145 (in Polish).
• [6] M. Holzer, E. Bagińska, A. Baliński, et al., A guide to the best available techniques (BAT), directions for foundry industry, Ministry of the Environment, (2005) (in Polish).
• [7] C. Podrzucki, , J. Szopa, Furnaces and metallurgical devices used in foundries, Ed. Silesia (Wyd. Śląsk), Katowice (1982) (in Polish).
• [8] P. Januszewicz, A cupola and its operating, PWT, Warsaw (1953) (in Polish).