Solidification of superalloys in shell moulds and its numerical simulation

• Autorzy: Roučka J. , Kováč M. , Odložil J. , Hrbáček K.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of the experiments on the solidification of superalloys in shell moulds. The analysis of heat transfer during the solidification of castings in ceramic moulds was carried out theoretically and confirmed by the results of earlier experiments conducted on model shells. Results of experimental temperature measurement were compared with numerical calculations (performed using the ProCast software) and corrections of the calculation parameters were proposed. A model of structure simulation was verified on a selected real casting. It can be assumed that simulating the structure will be a theoretically and computationally demanding problem.

Słowa kluczowe

EN

innovative materials in foundry; innovative foundry technologies; superalloys; shell mould; numertical simulation

PL

technologie innowacyjne w odlewnictwie; materiały innowacyjne w odlewnictwie; nadstopy; krzepnięcie; forma skorupowa; symulacja numeryczna

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1
• Strony: 137--146
• Opis fizyczny: Bibliogr. 3 poz., rys., wykr.

Twórcy

autor

Roučka J.

autor

Kováč M.

autor

Odložil J.

autor

Hrbáček K.

• Brno University of Technology, Faculty of Mechanical Eng. BS Velká Bíteš, a.s,

Bibliografia

• [1] Gray,W.A., Müller, R.: Engineering Calculations in Radiative Heat Transfer. 1st ed. Pergamon Press Oxford (UK), 1974.
• [2] Incropera, F. P., DeWin, D. P.: Fundamentals of Heat and Mass Transfer. 3rd ed. J. Wiley & Sons, New York, 1990.
• [3] [Raznjevic, K.: Thermodynamic Tables (in Czech). Alfa, Bratislava, 1984.