Corrosion resistance of various bio-films deposited on austenitic cast steel casted by lost-wax process and in gypsum mould

• Autorzy: Gawroński J.
• Języki publikacji: EN

Abstrakty

EN

This work is the next of a series concerning the improvement of austenitic cast steel utility predicted for use in implantology for complicated long term implants casted by lost-wax process and in gypsum mould. Austenitic cast steel possess chemical composition of AlSl 316L medical steel used for implants. In further part of present work investigated cast steel indicated as AlSl 316L medical steel. Below a results of electrochemical corrosion resistance of carbon layer and bi-layer of carbon/HAp deposited on AISI 316L researches are presented. Coatings were manufactured by RF PACVD and PLD methods respectively. Obtained results, unequivocally indicates on the improvement of this type of corrosion resistance by substrate material with as deposited carbon layer. While bi-layer of carbon/HAp are characterized by very low corrosion resistance.

Słowa kluczowe

EN

carbon coatings; hydroxyapatite; corrosion; austenitic cast steel

PL

warstwy węglowe; hydroksyapatyt; korozja; staliwo austenityczne

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1
• Strony: 39--44
• Opis fizyczny: Bibliogr. 11 poz., rys., tab.

Twórcy

autor

Gawroński J.

• Department of Materials Technologies and Production Systems, Technical University of Łódź, Stefanowskiego 1/15 Street, 90-924 Łódź, Poland,

Bibliografia

• [1] S. Mitura, P. Niedzielski, D. Jachowicz, M.Langer, J.Marciniak, A.Stanishevsky, E.Tochitsky, P.Louda, P.Couvrat, M.Denis, P.Loudin: „Influence of carbon coatings origin on the properties important for biomedical application”. Diamond and Related Materials, nr 5 (1996) 1185-1188.
• [2] P. Niedzielski: „Wytwarzanie warstw nanokrystalicznego diamentu na potrzeby medycyny”. Praca doktorska. Politechnika Łódzka, 1998.
• [3] S. Mitura i in: „Nanokrystaliczny diament dla medycyny”. Inżynieria Materiałowa, 3 (2000).
• [4] S.Rodil i in.: “Properties of carbon films and their biocompatibility using in-vitro tests”. Diamond and Related Materials, nr 12 (2003) 931-937.
• [5] R.J.Narayan: “Nanostructured diamondlike carbon thin films for medical applications”. Materials Science & Engineering”, 25 (2005) 405-416.
• [6] D.Bociąga: Praca doktorska, Politechnika Łódzka, 2007.
• [7] W.Jakubowski, G.Bartosz, P.Niedzielski, W.Szymański, B.Walkowiak: „Nanocrystalline diamond surface is resistant to bacterial colonization”. Diamond & Related Materials, 13 (2004) 1761-1763.
• [8] M. Kamińska: “Modyfikacja warstw nanokrystalicznego diamentu (NCD) dla zastosowań w medycynie”. Praca doktorska.Politechnika Łódzka, 2006.
• [9] M.Allen, B.Myer, N.Rushton: “In vitro and in vivo investigation into the biocompatibility of diamond-like carbon coatings for ortopedic applications”. J. Biomed mater. Res., 58 (2001) 319-328.
• [10] R.Hauert: “A review of modifield DLC coatings for biological applications”. Diamond & Related Materials, 12 (2003) 583-589.
• [11] J.Gawroński: „Adhesion of composite carbon/hydroxyapatite coatings on AISI 316L medical steel”. Archives of Foundry Engineering, ISSN (1897 - 3310) Vol.9, Issue 3/2009, 235 – 242.