The remelting of the surface layer of C15 steel with an electric arc

• Autorzy: Adamiak S.
• Języki publikacji: EN

Abstrakty

EN

This study presents results of a research on enhancing properties of the surface layer of C15 steel by treating it with a concentrated heat stream utilizing the GTAW method. Remelting of the surface layer of C15 steel was performed by a welding head moving with a constant speed of 200 mm/min and varying current intensity of the electric arc ranging from 50A to 300A as well as with a constant current intensity of the electric arc and a varying speed of the welding head ranging from 200 mm/min to 800 mm/min. Metallographic evaluations (LM and SEM) of the resulting structure were performed as well as measurement of the hardness of the remelted layers. Correlation between current intensity of the electric arc and its speed in relation to the treated material sample and the geometry of the remelted layers and their microhardness was established.

Słowa kluczowe

EN

steel; remelting; martensite; surface layer; GTAW method

PL

stal; przetapianie; martenzyt; warstwa wierzchnia; metoda GTAW

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2008
• Tom: Vol. 8, iss. 3
• Strony: 5--10
• Opis fizyczny: Bibliogr. 10 poz., rys., tab., wykr.

Twórcy

autor

Adamiak S.

• Technical Institute, University of Rzeszow, Rejtana 16a, 35-111 Rzeszów,

Bibliografia

• [1] A.W.Orłowicz, A.Trytek, Shaping of microstructure and and service properties of cast iron castings by surface refinement with elektric arc plasma, Archives of foundry, Vol. 7, No 23, 2007, (in Polish).
• [2] A.W.Orłowicz, A.Trytek, Effect of rapid solidification on sliding wear of iron castings, Wear 9258, 2002.
• [3] Z. Nitkiewicz, J. Iwaszko, The use of arc plasma in surface engineering. Material engineering, No 6, 373-375, 2000, (in Polish).
• [4] A.W.Orłowicz, M.Mróz, Thermal coefficients of the GTAW method. Archives of Foundry, Vol. 3, No 3, 2003, (in Polish).
• [5] Y.Adonyj, R.W.Richardson, W.A.Beaslack, Investigation of arc force effects in surface GTAW welding. Welding Journal, No 9, 35-44, 1996.
• [6] Z.Opiekun, A.Trytek, The influence of plasma-generating gas on the quantity of heat taken by surface layer partially remelted casts of the MAR-M509 alloy, Archives of Foundry, Vol. 6, No 18(1/2), 401-406, 2006, (in Polish).
• [7] W. Orłowicz, M, Mróz, A. Tryte, Heating efficiency in the GTAW process. Acta Metallurgica Slovaca, No 2, 539-543, 1999.
• [8] M. Mróz, A. Orłowicz, M. Tupaj, Thermal coefficients of the GTAW method, Archives of Foundry, Vol. 5, No 17, s.217-224, 2005, (in Polish).
• [9] H. Kahloun, Proceedings of the Fourth International Conference on Ressidual Stresses, Baltimore, Maryland USA, 1994.
• [10] A. Bylica, W. Bochnowski, G. Więcek, Naprężenia własne w stali c45 nadtapianej laserowo, Archives of Foundry, Vol. 6, No 19, 2006, (in Polish).