Factors influencing selection of effective reclamation techniques and assessment methods of the reclaimed material quality

• Autorzy: Dańko J. , Holtzer M. , Dańko R.
• Języki publikacji: EN

Abstrakty

EN

The paper dealt with such problems of scientific and development research concerning the reclamation of used foundry sands as: management of used sands generated in foundry production, recommendation of selection of effective reclamation techniques and assessment methods of the reclaimed material quality, identification methods and an environmental impact assessment of spent sands from foundry technologies, moulding and core sands of an increased reclamability and a decreased harmfulness for environment.

Słowa kluczowe

EN

waste management; used sand; reclamation; quality

PL

gospodarka odpadami; masa zużyta; jakość

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2007
• Tom: Vol. 7, iss. 4
• Strony: 29--32
• Opis fizyczny: Bibliogr. 15 poz., tab.

Twórcy

autor

Dańko J.

autor

Holtzer M.

autor

Dańko R.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23, 30-059 Kraków,

Bibliografia

• [1] Dańko J., Dańko R., Holtzer M.: Reclamation of used sands in foundry production. Metallurgy, vol. 42, br. 3, Zagreb, (July/ September) 2003, pp. 173 - 178.
• [2] Dańko J., Dańko R.: Low temperature reclamation treatment of water-glass bonded sands . Archives of Foundry. 2004, vol. 4, No. 11, pp.102-107. (in Polish).
• [3] Dańko R.: Theoretical and technical backgrounds of optimum choice of the dry reclamation process for used moulding sands. PH. D. Thesis, Department of Foundry Engineering, AGH, Kraków 2006.
• [4] Dańko J., Holzer M., Kargulewicz I., Lewandowski J. L., Zapalski A.: Możliwość wykorzystania metody określania zapotrzebowania na kwas (Zk) do oceny jakości regeneratu z mas z cementem. Acta Metallurgica Slovaca. nr 4, Special issue 2/1998, pp. 136-140.
• [5] Holzer M.: Trends in sand molds and cores with inorganic binder to reduce harmful impact an environment. Archives of Foundry, 2002, vol. 2, No 3, 2002, pp. 50-56. (in Polish)
• [6] Jelinek P.: Pojivove soustavy slevarenskych formovačich smesi, ISBN 80-239-2188-6, 2004.
• [7] Johnson J.A. Lister D.R.: Recent developments in the sodium silicate (water glass) process including high level sand reclamation. International Conference "The reclamation of used foundry sand" (Czech Republic), 16-17. 04. 2002, pp. 53 - 72.
• [8] Leidel D.S.: The influence of sand and binders on reclaimability. Foundry Trade Journal, Issue 3497, v. 168, 1994, pp. 384-387.
• [9] Łucarz M., Dańko J., Dańko R.: Influence of non-organic impurities on sand properties prepared on reclaimed sand basis; Acta Metallurgica Slovaca, Košice, Ročnik 8, t. (1/2), No 2, 2002, pp. 87 - 92.
• [10] "Badania zmierzające do optymalizacji parametrów regeneracji różnych rodzajów masy w regeneratorze odśrodkowym o zmniejszonym efekcie udarowym oraz do optymalizacji konstrukcji regeneratorów tego typu". Research Project KBN, No 7T08B 004 14. Department of Foundry Engineering, AGH, Kraków 1998-1999.
• [11] Holtzer M., Kargulewicz I. Leaching of Cd, Cu, Pb, and Zn from used sands as a criterion for estimate harmfulness. III International Conference "Modern Foundry Technologies - Environmental Protection, Kraków, 7-9 September 2000, pp. 87-92.
• [12] Integrated Pollution and Control. Reference Document on the Best Available Techniques in the Smitheries and Foundries Industry. European Commission, July 2004.
• [13] Lewandowski J.L., Dańko J., Dańko. R.: Selection of waste sand at the Odlewnie Polskie SA Foundry in Starachowice. Przegląd Odlewnictwa, 2004, Vol. 54, No 2, pp. 120-126.
• [14] Holtzer M.: Problems of environment protection in the foundry industry after Poland's joining to European Union. Przegląd Odlewnictwa, 2004, Vol. 54, No 4, pp. 314-321.
• [15] Dańko J., Holzer M., Dańko R.: Reclamation of Used Foundry Sands - Study of Scientific Problems and Development Research, rozdział monograficzny w książce "Research in Polish Metallurgy at the Beginning of XXI Century. Committee of Metallurgy of the Polish Academy of Sciences, ISBN 83-910159-3-9, Kraków 2006, pp. 219-237.