PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Microstructure and quantitative analysis of cast ZRE1 magnesium alloy

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
A number of commercial magnesium casting alloys based on Mg-Zn binary alloy system contains some additions of rare earths metals and zirconium. The rare earth elements are added to improvement creep resistance, zirconium to improvement mechanical properties at room temperature due to strongly effect on grain size of magnesium alloys. Quantitative and qualitative characteristic of microstructure of Mg-3Zn-3RE (ZRE1) were analyzed. The optical and scanning electron microscopy were used to study the morphology of microstructural compounds in this alloy. The X-ray diffraction and X-ray energy dispersive spectroscopy analysis were used to determined phase composition of ZRE1 alloy. In the purpose quantitative description of microstructure automatic procedures using Met-Ilo image analysis program were developed. Prepared automatic procedures will be useful to future investigations the effect of long-standing heat treatment and influence parameters of sand casting on microstructure of this alloy. The results show that microstructure of ZRE1 alloy contains [alpha]-Mg matrix with discontinuous network intermetallic (Mg,Zn)_12RE compound at the grain boundaries. The intermetallic phase content in as-cast state was 10.8 % and grain size was 766 [mikro]m2.
Rocznik
Strony
175--178
Opis fizyczny
Bibliogr. 16 poz., rys., tab., wykr.
Twórcy
autor
autor
autor
Bibliografia
  • [1] Y. Wang, S. Guan, X. Zeng, W. Ding, Effects of RE on the microstructure and mechanical properties of Mg-8Zn-4Al magnesium alloy, Materials Science and Engineering A416 (2006) 109-118.
  • [2] T. Rzychoń, A. Kiełbus, the new cast Mg-Al-RE magnesium alloys, Archives of Foundry, Vol. 6, N° 18, 2006, 167-172 (in Polish).
  • [3] A. Kiełbus, J. Adamiec, M. Hetmańczyk, Microstructure of the GA8 casting magnesium alloy, Archives of Foundry, Vol. 6, N° 18, 2006, 203-208 (in Polish).
  • [4] R. Cibis, A. Kiełbus, Hot chamber die casting of magnesium alloys, Archives of Foundry, Vol. 6, N° 18, 2006, 179-184 (in Polish).
  • [5] A. Kiełbus, R. Cibis, Influence of die casting parameters on the microstructure and mechanical properties of AM50 magnesium alloy, Archives of Foundry, Vol. 6, N° 18, 2006, 185-190 (in Polish).
  • [6] B.R. Powell, V. Rezhets, M.P. Balogh, R.A. Waldo, Microstructure and Creep Behavior in AE42 Magnesium Die-Casting Alloy, JOM, August 2002, 34-38.
  • [7] T.Rzychoń, A. Kiełbus: Effect of rare earth elements on the microstructure of Mg-Al alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, 135-138.
  • [8] L.Y. Wei, G.L. Dunlop, H. Westengen, Development of microstructure in cast Mg-Al-rare earth alloys, Materials Science and Technology, 1996; 12; 9; 741-750.
  • [9] E. Aghion, N. Moscovitch, A. Arnon, The correlation between wall thickness and properties of HPDC Magnesium alloys, Materials Science and Engineering, A447 (2007) 341-346.
  • [10] K.N. Braszczyńska-Malik, M. Mróz, Fusion Geometry and thermal coefficients of refine surfacing process of AZ91 alloy casting, Archives of Foundry, Vol. 6, N° 18, 2006, 221-227 (in Polish).
  • [11]M. Podosek, G.W. Lorimer, The influence of intergranular microstructure of Mg-Zn-RE alloys on properties at elevated temperatures, Archives of Metallurgy, Vol. 45, Issue 1, 2000, 47-55.
  • [12]Magnesium and Magensium Alloys, ASM Specialty Handbook, Ed. by M.M. Avedesian and H. Baker, 1999.
  • [13]Magnesium Technology. Metallurgy, Design Data, Applications, Eds. H.E. Friedrich, B.L. Mordike, Springer-Verlag Berlin Heidelberg 2006.
  • [14]I.P. Moreno, T.K. Nandy, J.W. Jones, J.E. Allison, T.M. Pollock, Microstructural stability and creep pf rare-earth containing magnesium alloys, Scripta Materialia 48, (2003), 1029-1034.
  • [15]Buehler Ltd. Buehler's guide to materials preparation. Illinois, USA: The Argus Press, Niles; 2002.
  • [16]Szala J. Application of computer-aided image analysis methods for a quantitative evaluation of material structure (in Polish). Gliwice, Poland: Silesian University of Technology; 2001.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ3-0033-0055
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.