Ferrous alloys cast under high pressure gas atmosphere

• Autorzy: Pirowski Z. , Olszyński J. , Gwiżdż A.
• Języki publikacji: EN

Abstrakty

EN

The main objective of this paper is describing the essence of the process of introducing nitrogen to the melt of ferrous alloys by application of overpressure above the metal bath. The problem was discussed in terms of both theory (the thermodynamic aspects of the process) and practice (the technical and technological aspects, safety of the furnace stand operation, and technique of conducting the melt). The novel technique of melting under high pressure of the gas atmosphere (up to 5 MPa) has not been used so far in the domestic industry, mainly because of the lack of proper equipment satisfyng the requirements of safe operation. Owing to cooperation undertaken with a partner from Bulgaria, a more detailed investigation of this technology has become possible and melting of selected ferrous alloys was conducted under the gas atmosphere at a pressure of about 3,5 MPa.

Słowa kluczowe

EN

innovative foundry materials; innovative foundry technologies; metallurgical process; nitrogen solubility; ferrous alloys; high nitrogen steels

PL

materiały odlewnicze; technologie odlewnicze; innowacyjność; rozpuszczalność azotu; stopy żelaza; stale wysokoazotowe

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2007
• Tom: Vol. 7, iss. 1
• Strony: 107--112
• Opis fizyczny: Bibliogr. 15 poz., fot., rys.

Twórcy

autor

Pirowski Z.

autor

Olszyński J.

autor

Gwiżdż A.

• Department of Ferrous Alloys, Foundry Research Institute, Zakopiańska Str. 73, 30-418 Kraków, Poland,

Bibliografia

• [1] Masson J. M., Fonderie - Fondeur d'Aujourd'hui, No. 163 (1997) 18-42
• [2] Pirowski Z., Prace Instytutu Odlewnictwa, zeszyt 1-2, (1998) 75-87 (in Polish)
• [3] Czyżowicz S., Prace IMŻ 3-4 (1993) 26-38 (in Polish)
• [4] Malkiewicz T., Metaloznawstwo stopów żelaza, PWN, W-wa-Kraków (1976) (in Polish)
• [5] Pirowski Z., Tybulczuk J., Uhl W., Acta Metallurgica Slovaca, Koszyce, vol. 2, No. 5 (1999) 333-338 (in Polish)
• [6] Speidel M. O., Uggowitzer P. J. - ref. No. 3, 60 World Foundry Congress, The Hague (1993)
• [7] Rashev T. V.: High Nitrogen Steels. Metallurgy under pressure; Bulgarian Academy of Sciences, Sofia (1995).
• [8] Pirowski Z., Evaluation of susceptibility to the strain hardening of some ferrous alloys under the influence of operating stresses, Archives of Foundry vol. 6, No. 18 (2006) 431-436 (in Polish)
• [9] Binczyk F., Gierek A., The structure and properties of fermanal cast steel, Archives of Foundry vol. 6, No. 18 (2006) 455-458 (in Polish)
• [10] Dyja D., Stradomski Z., Stachura S., Possibilities of microstructure optimization in ferritic-austenitic GX2CrNiMoCu25-6-3-3 cast steel, Archives of Foundry vol. 6, No. 18 (2006) 459-464 (in Polish)
• [11] Pirowski Z., Olszyński J., Tybulczuk J., Gościański M., Innovative cast materials for part of agricultural machines improving the competitiveness of final products, Zeszyty Naukowe Politechniki Rzeszowskiej, No. 227, Mechanika, vol. 66 (2006) 205-216 (in Polish)
• [12] Pirowski Z., Olszyński J., Turzyński J., Gościański M., Structural and tribology research on two-phase Cr-Ni-Mo cast steel with increased contents of nitrogen, MOTROL Motorization and power industry in agriculture, vol. 8 (2006) 174-180 (in Polish)
• [13] Andreev Ch., Laboratory induction furnace under pressure - IFP 001, Bulgarian Academy of Sciences (2006), materiały informacyjne
• [14] Manolov V., Lukarski Y., Rashev T., Popov S., Kinetics of nitride particle growth during nitriding of a solid Cr-Fe alloy, High Nitrogen Steels, Edited by: N. Akdut De Cooman B.C., Foct J. - GRIPS media , No 4 (2004), 605-609
• [15] Gavrilova R., Yotova A., Manolov V., Influence of the Crystalization Parameters on the Cell Structure of a Nitrogen Tool Steel, Journal of Materials Science and Technology, vol. 12, No. 1 (2004) 102-110